FCC ID S2L20040601CX2

Model: WM3B2915ABG (802.11a/b/g WLAN Adapter)

by Lenovo (United States) Incorporated

Grantee Code: S2L   Product Code: 20040601CX2
Latest application date: 2005-09-13

FCC ID Device Details

FCC IDS2L20040601CX2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS2L
Product Code20040601CX2
Applicant BusinessLenovo (United States) Incorporated 🇺🇸
Related Domains lenovo.com
Equipment ClassModel: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Test FirmIBM Yamato EMC Engineering

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5250 MHzClass II permissive change or modification of presently authorized equipment2005-09-13
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-09-13
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: ANO20040601CX2 Grant Date: 10/07/20042005-04-28
5180-5250 MHzChange in identification of presently authorized equipment. Original FCC ID: ANO20040601CX2 Grant Date: 10/07/20042005-04-28

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2005-09-13PDF 938.6 KB
ext photographsExternal Photos2005-04-28PDF 496.1 KB
photographsExternal Photos2005-04-28PDF 496.1 KB
label photoID Label/Location Info2005-04-28PDF 513.2 KB
Test Setup PhotosTest Setup Photos2005-09-13PDF 1 MB
Test ReportTest Report2005-09-13PDF 1 MB
Confidentiality LetterCover Letter(s)2005-09-13PDF 54.3 KB
Cover LetterCover Letter(s)2005-09-13PDF 56.1 KB
Cover letterCover Letter(s)2005-04-28PDF 677.9 KB
cover letterCover Letter(s)2005-04-28PDF 677.9 KB
request confidentiality Metadata onlyCover Letter(s)2005-04-28PDF 297.5 KB
request for confidentialityCover Letter(s)2005-04-28PDF 302.8 KB
RF Exposure EvaluationRF Exposure Info2005-09-13PDF 286.2 KB
Antenna Specification Metadata onlyOperational DescriptionPDF 1.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 109.5 KB

Application Information

Application IDtZ1jnBGWwAyIA/xqauLtvw==
Final Action Date2005-09-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0012799359
Model20040601CX2
Frequency Range5180-5250 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionModel: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Responsible PartyJacky Yeung, Regulatory Compliance Engineer, jyeung1@lenovo.com , 919-257-5344
AgentRandy Randy Randy, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com , 410-290-6652
Technical ContactRandy Ortanez, PCTEST Engineering Lab., Inc., randy@pctestlab.com , 410-290-6652
Test FirmAkihisa Sakurai, IBM Yamato EMC Engineering, akihisa@jp.ibm.com , 81-462-73-2613
TCB Emailrandy@pctestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Class II permissive change. Output is conducted. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.

Applications

Application IDDatePurpose
tZ1jnBGWwAyIA/xqauLtvw==2005-09-13Class II permissive change or modification of presently authorized equipment
CyqYdVlhD5dd5tC8IlSIPA==2005-09-13Class II permissive change or modification of presently authorized equipment
pzqPaf1JGvJC2MGA2f5nPg==2005-04-28Change in identification of presently authorized equipment. Original FCC ID: ANO20040601CX2 Grant Date: 10/07/2004
1Hpko8bYiiclAeTU0SGXYA==2005-04-28Change in identification of presently authorized equipment. Original FCC ID: ANO20040601CX2 Grant Date: 10/07/2004

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.16115C28, CC
2412-2462 MHz0.16115C28
5180-5250 MHz0.01515E28, CC
5250-5320 MHz0.03815E28, CC
5745-5825 MHz0.26415C28, CC

Grants

TCB Grant - Application tZ1jnBGWwAyIA/xqauLtvw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 09/13/2005

Application Dated: 09/13/2005
Lenovo (United States) Incorporated
Lenovo (United States) Incorporated
1009 Think Place-Building Two
Morrisville, NC 27560
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Model: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15E 5180.0  -  5250.0 0.015  
28 CC 15E 5250.0  -  5320.0 0.038  

Limited Modular Approval. Class II permissive change.

Output is conducted. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tZ1jnBGWwAyIA/xqauLtvw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (United States) Incorporated
Lenovo (United States) Incorporated 1009 Think Place-Building Two
Morrisville, NC 27560
United States
  Date of Grant: 09/13/2005

Application Dated: 09/13/2005
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Model: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15E 5180.0  -  5250.0 0.015  
28 CC 15E 5250.0  -  5320.0 0.038  

Limited Modular Approval. Class II permissive change.

Output is conducted. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pzqPaf1JGvJC2MGA2f5nPg==

This application does not exist.

EAS Grant - Application pzqPaf1JGvJC2MGA2f5nPg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (United States) Incorporated
Lenovo (United States) Incorporated 1009 Think Place-Building Two
Morrisville, NC 27560
United States
  Date of Grant: 04/28/2005

Application Dated: 03/23/2005
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Digital Transmission System
Notes: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 15C 2412.0  -  2462.0 0.161  
28 CC 15C 5745.0  -  5825.0 0.264  

Limited Modular Approval. Output is peak conducted. Class II permissive change. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CyqYdVlhD5dd5tC8IlSIPA==

Mail To:
James Pate, Senior Engineer
IBM Products United States Inc (Delaware)
121953039 Cornwallis Road
Research Triangle Park, NC 27709
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 09/13/2005

Application Dated: 09/13/2005
Lenovo (United States) Incorporated
Lenovo (United States) Incorporated
1009 Think Place-Building Two
Morrisville, NC 27560
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Digital Transmission System
Notes: Model: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.161  
28 CC 15C 5745.0  -  5825.0 0.264  

Limited Modular Approval. Class II permissive change.

Output is conducted. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CyqYdVlhD5dd5tC8IlSIPA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (United States) Incorporated
Lenovo (United States) Incorporated 1009 Think Place-Building Two
Morrisville, NC 27560
United States
  Date of Grant: 09/13/2005

Application Dated: 09/13/2005
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Digital Transmission System
Notes: Model: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.161  
28 CC 15C 5745.0  -  5825.0 0.264  

Limited Modular Approval. Class II permissive change.

Output is conducted. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1Hpko8bYiiclAeTU0SGXYA==

This application does not exist.

EAS Grant - Application 1Hpko8bYiiclAeTU0SGXYA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (United States) Incorporated
Lenovo (United States) Incorporated 1009 Think Place-Building Two
Morrisville, NC 27560
United States
  Date of Grant: 04/28/2005

Application Dated: 03/23/2005
 
Attention: Jacky Yeung , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S2L20040601CX2
Name of Grantee:  Lenovo (United States) Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WM3B2915ABG (802.11a/b/g WLAN Adapter)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15E 5180.0  -  5250.0 0.015  
28 CC 15E 5250.0  -  5320.0 0.038  

Limited Modular Approval. Output is peak conducted. Class II permissive change. This device is approved to be installed in specific computers as indicated in filings under this FCC ID, and can be co-located only with approved transmitters listed on the IBM web site or shown in filings under this FCC ID. Approved transmitters must be turned off when non-listed transmitters are used. This device must utilize a BIOS lock mechanism which ensures use only with hosts as specified in the certification filings. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distances from all persons as indicated in the filings. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values are: 0.61 W/kg 2.4 GHz-band; 0.31 W/kg 5.3 GHz-band; 0.88 W/kg 5.8 GHz-band.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:
James Pate, Senior Engineer
IBM Products United States Inc (Delaware)
121953039 Cornwallis Road
Research Triangle Park, NC 27709