FCC ID S4GEM35XA
ETRX35x Series Zigbee Modules
by Silicon Laboratories Finland Oy
Grantee Code: S4G Product Code: EM35XA
Latest application date: 2015-05-18
FCC ID Device Details
| FCC ID | S4GEM35XA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | S4G |
| Product Code | EM35XA |
| Applicant Business | Silicon Laboratories Finland Oy 🇫🇮 |
| Related Domains |  silabs.com  powermat.com |
| Equipment Class | ETRX35x Series Zigbee Modules |
| Test Firm | Hermon Laboratories Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-05-18 |
| 2400-2483.5 MHz | Original Equipment | 2010-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2010-05-06 | PDF 906.1 KB |
| internal photos | Internal Photos | 2010-05-06 | PDF 288.5 KB |
| External Photos | External Photos | 2010-05-06 | PDF 288.5 KB |
| label art | ID Label/Location Info | 2010-05-06 | PDF 29.3 KB |
| label position | ID Label/Location Info | 2010-05-06 | PDF 23 KB |
| Schematics 2 | Schematics | 2010-05-06 | PDF 75 KB |
| setup photos | Test Setup Photos | 2010-05-06 | PDF 229.6 KB |
| Part 18 | Test Report | 2015-05-18 | PDF 1.1 MB |
| report | Test Report | 2010-05-06 | PDF 2.8 MB |
| Drug Declaration | Attestation Statements | 2010-05-06 | PDF 881.9 KB |
| Modular Requirements | Attestation Statements | 2010-05-06 | PDF 36.7 KB |
| Authorization permissive change | Cover Letter(s) | 2015-05-18 | PDF 195.4 KB |
| Cover Letter(s) | Cover Letter(s) | 2015-05-18 | PDF 22.1 KB |
| confidentiality | Cover Letter(s) | 2015-05-18 | PDF 17.5 KB |
| Confidentiality Request | Cover Letter(s) | 2010-05-06 | PDF 48 KB |
| Modular Approval | Cover Letter(s) | 2010-05-06 | PDF 36.5 KB |
| RF Exposure info-1 | RF Exposure Info | 2015-05-18 | PDF 872.7 KB |
| RF Exposure info-2 | RF Exposure Info | 2015-05-18 | PDF 14.6 KB |
| Exclusion Statement | RF Exposure Info | 2010-05-06 | PDF 40.2 KB |
| Operational Description Metadata only | Operational Description | PDF 1.6 MB |
Application Information
| Application ID | pO4jhyjx4XdC64DCyvKeEQ== |
|---|---|
| Final Action Date | 2015-05-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013062708 |
| Model | EM35XA |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ETRX35x Series Zigbee Modules |
| Responsible Party | Enrico Taddeo, Mr, Enrico.Taddeo@silabs.com , +35894355060 |
| Agent | Daniel Daniel Daniel, PowerMat Ltd., dshaingurten@powermat.com , 97229950530 |
| Technical Contact | Michael Nikishin, Hermon Laboratories Ltd., nikishin@hermonlabs.com  , 972 4626 8440 |
| Non-Technical Contact | Daniel Shaingurten, PowerMat Ltd., dshaingurten@powermat.com , 972 2995 0530 |
| Test Firm | George Shleimovich, Hermon Laboratories Ltd., George@HERMONLABS.com , 97246268468 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power listed is conducted. Modular Approval, the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID in the test report. The following module variants are covered by this Grant: ETRX351, ETRX351HR, ETRX357 and ETRX357HR Class II permissive change: To allow Zigbee Module, FCC ID:S4GEM35XA for co-location with Wireless Charging Spot transmitter authorized under FCC part 18 DoC. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pO4jhyjx4XdC64DCyvKeEQ== | 2015-05-18 | Class II permissive change or modification of presently authorized equipment |
| EeGiNARjOzoMTUay9gzTjg== | 2010-05-06 | Original Equipment |
Grants
TCB Grant - Application pO4jhyjx4XdC64DCyvKeEQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/18/2015 Application Dated: 05/15/2015 |
| Silicon Laboratories Finland Oy |
| Alberga Business Park |
| Bertel Jungin aukio 3 |
| Espoo, 02600 Finland |
| Attention: Enrico Taddeo , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S4GEM35XA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | ETRX35x Series Zigbee Modules |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.007 |
| Output power listed is conducted. Modular Approval, the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID in the test report. The following module variants are covered by this Grant: ETRX351, ETRX351HR, ETRX357 and ETRX357HR Class II permissive change: To allow Zigbee Module, FCC ID:S4GEM35XA for co-location with Wireless Charging Spot transmitter authorized under FCC part 18 DoC. |
EAS Grant - Application pO4jhyjx4XdC64DCyvKeEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Alberga Business Park Bertel Jungin aukio 3 Espoo, 02600 Finland |
Date of Grant: 05/18/2015 Application Dated: 05/15/2015 |
| Attention: Enrico Taddeo , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S4GEM35XA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | ETRX35x Series Zigbee Modules |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.007 |
| Output power listed is conducted. Modular Approval, the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID in the test report. The following module variants are covered by this Grant: ETRX351, ETRX351HR, ETRX357 and ETRX357HR Class II permissive change: To allow Zigbee Module, FCC ID:S4GEM35XA for co-location with Wireless Charging Spot transmitter authorized under FCC part 18 DoC. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 05/06/2010 Application Dated: 05/06/2010 |
| Telegesis (UK) Ltd |
| Abbey Barn Business Centre |
| AbbeyBarn Lane |
| High Wycombe, HP10 9QQ United Kingdom |
| Attention: Nicholas Gomersall , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S4GEM35XA |
| Name of Grantee: | Telegesis (UK) Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | ETRX35x Series Zigbee Modules |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.007 |
| Output power listed is conducted. Modular Approval, the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID in the test report. The following module variants are covered by this Grant: ETRX351, ETRX351HR, ETRX357 and ETRX357HR |
EAS Grant - Application EeGiNARjOzoMTUay9gzTjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telegesis (UK) Ltd Abbey Barn Business Centre AbbeyBarn Lane High Wycombe, HP10 9QQ United Kingdom |
Date of Grant: 05/06/2010 Application Dated: 05/06/2010 |
| Attention: Nicholas Gomersall , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S4GEM35XA |
| Name of Grantee: | Telegesis (UK) Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | ETRX35x Series Zigbee Modules |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.007 |
| Output power listed is conducted. Modular Approval, the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID in the test report. The following module variants are covered by this Grant: ETRX351, ETRX351HR, ETRX357 and ETRX357HR |
| Mail To: |