FCC ID S57-WNMNCM9
Multinode 802.11 Radio
by Honeywell International Inc.
Grantee Code: S57 Product Code: WNMNCM9
Latest application date: 2008-11-04
FCC ID Device Details
| FCC ID | S57-WNMNCM9 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | S57 |
| Product Code | WNMNCM9 |
| Applicant Business | Honeywell International Inc. 🇺🇸 |
| Related Domains |  honeywell.com |
| Equipment Class | Multinode 802.11 Radio |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-11-04 |
| 2412-2462 MHz | Original Equipment | 2007-08-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Multinode Users Guide | Users Manual | 2008-11-04 | PDF 963.4 KB |
| Pro Installation guide revised November 2008 | Users Manual | 2008-11-04 | PDF 279.8 KB |
| User Manual | Users Manual | 2007-08-22 | PDF 426.5 KB |
| User Manual 2 | Users Manual | 2007-08-22 | PDF 73.1 KB |
| Internal PHotos 1 | Internal Photos | 2008-11-04 | PDF 1.9 MB |
| Internal Photos 2 | Internal Photos | 2008-11-04 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2007-08-22 | PDF 3.8 MB |
| External PHotos | External Photos | 2008-11-04 | PDF 1.6 MB |
| External PHotos | External Photos | 2007-08-22 | PDF 1.6 MB |
| ID Label | ID Label/Location Info | 2008-11-04 | PDF 1.5 MB |
| FCC ID label | ID Label/Location Info | 2007-08-22 | PDF 476.8 KB |
| Antenna Info | Operational Description | 2007-08-22 | PDF 11.6 KB |
| Antenna Info 2 | Operational Description | 2007-08-22 | PDF 2.6 MB |
| Test Setup PHotos HONE00114 | Test Setup Photos | 2007-08-22 | PDF 622.1 KB |
| Test Setup Photos HONE00111 | Test Setup Photos | 2007-08-22 | PDF 858.4 KB |
| Test Report | Test Report | 2007-08-22 | PDF 2.4 MB |
| Test Report HONE00111 | Test Report | 2007-08-22 | PDF 1.9 MB |
| Compliance Opinion | Cover Letter(s) | 2008-11-04 | PDF 15.4 KB |
| Cover letter | Cover Letter(s) | 2008-11-04 | PDF 23 KB |
| Letter requesting Pro Installation guide be superceded | Cover Letter(s) | 2008-11-04 | PDF 8.7 KB |
| Agent Authorization letter | Cover Letter(s) | 2007-08-22 | PDF 13.7 KB |
| Compliance Opinion | Cover Letter(s) | 2007-08-22 | PDF 18 KB |
| Cover Letter | Cover Letter(s) | 2007-08-22 | PDF 9.5 KB |
| Request for Confidentiality | Cover Letter(s) | 2007-08-22 | PDF 29.6 KB |
| RF Exposure | RF Exposure Info | 2008-11-04 | PDF 26 KB |
| RF Exposure | RF Exposure Info | 2007-08-22 | PDF 120.7 KB |
Application Information
| Application ID | d2eMG1eJyf/aghLaMbnjIQ== |
|---|---|
| Final Action Date | 2008-11-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013169495 |
| Model | -WNMNCM9 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Multinode 802.11 Radio |
| Responsible Party | David Mitchell Shipley, Approvals Engineer, david.shipley@honeywell.com , 602-293-1555 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dtolman@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| d2eMG1eJyf/aghLaMbnjIQ== | 2008-11-04 | Class II permissive change or modification of presently authorized equipment |
| GSk91VKm3K7kZyVWujsPwA== | 2007-08-22 | Original Equipment |
Grants
TCB Grant - Application GSk91VKm3K7kZyVWujsPwA==
TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 08/22/2007
Application Dated: 08/22/2007 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
|
Phoenix, AZ 85027-2708
|
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S57-WNMNCM9 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Multinode 802.11 Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts |
Frequency
Range (MHZ) |
Output
Watts |
Frequency
Tolerance |
Emission
Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | |||
| 15C | 5745.0 - 5825.0 | 0.264 |
|
Output power is conducted. This transmitter is approved for use only in Honeywell International's model WNMN Multinode access point. Only the antennas specifically approved in this application may be used with this device. Professional installation is required. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons.
Remote Fixed Pointto-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. When using integral antenna(s) the Multinode unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. |
EAS Grant - Application GSk91VKm3K7kZyVWujsPwA==
TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc.
1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 08/22/2007
Application Dated: 08/22/2007 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S57-WNMNCM9 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Multinode 802.11 Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts |
Frequency
Range (MHZ) |
Output
Watts |
Frequency
Tolerance |
Emission
Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | |||
| 15C | 5745.0 - 5825.0 | 0.264 |
|
Output power is conducted. This transmitter is approved for use only in Honeywell International's model WNMN Multinode access point. Only the antennas specifically approved in this application may be used with this device. Professional installation is required. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons.
Remote Fixed Pointto-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. When using integral antenna(s) the Multinode unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons.
|
| Mail To: |
|
EA729094 |
TCB Grant - Application d2eMG1eJyf/aghLaMbnjIQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/04/2008 Application Dated: 11/04/2008 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S57-WNMNCM9 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Multinode 802.11 Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | |||
| 15C | 5745.0 - 5825.0 | 0.264 |
| Output power is conducted. This transmitter is approved for use only in Honeywell International's Models WNMN and WNMX industrial access points. Optional collocated transmitter operating configuration with FCC ID S57-51306343 has been evaluated as described in this filing under this FCC ID; other collocation configurations require separate evaluation. Only the antennas specifically approved in filings under this FCC ID may be used with this device. Professional installation is required. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When using integral antenna(s) this unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons. Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. |
| Limited Single Modular |
EAS Grant - Application d2eMG1eJyf/aghLaMbnjIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 11/04/2008 Application Dated: 11/04/2008 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S57-WNMNCM9 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Multinode 802.11 Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | |||
| 15C | 5745.0 - 5825.0 | 0.264 |
| Output power is conducted. This transmitter is approved for use only in Honeywell International's Models WNMN and WNMX industrial access points. Optional collocated transmitter operating configuration with FCC ID S57-51306343 has been evaluated as described in this filing under this FCC ID; other collocation configurations require separate evaluation. Only the antennas specifically approved in filings under this FCC ID may be used with this device. Professional installation is required. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When using integral antenna(s) this unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons. Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. |
| Limited Single Modular |
| Mail To: |