FCC ID S5751306799
Low Cost ISA 100 Radio Module (51306799-001)
by Honeywell International Inc.
Grantee Code: S57 Product Code: 51306799
Latest application date: 2015-09-14
FCC ID Device Details
| FCC ID | S5751306799 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | S57 |
| Product Code | 51306799 |
| Applicant Business | Honeywell International Inc. 🇺🇸 |
| Related Domains |  honeywell.com |
| Equipment Class | Low Cost ISA 100 Radio Module (51306799-001) |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2015-09-14 |
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2014-04-16 |
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-05 |
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-15 |
| 2405-2475 MHz | Original Equipment | 2011-06-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-09-14 | PDF 1.5 MB |
| Installation Guide | Users Manual | 2014-04-16 | PDF 1.1 MB |
| User Guide | Users Manual | 2014-04-16 | PDF 1.2 MB |
| Manual | Users Manual | 2014-03-05 | PDF 297.5 KB |
| User Manual | Users Manual | 2011-06-28 | PDF 239.6 KB |
| Internal Photos | Internal Photos | 2015-09-14 | PDF 1.4 MB |
| IntPhot | Internal Photos | 2014-04-16 | PDF 522.8 KB |
| Internal Photos Host | Internal Photos | 2014-03-05 | PDF 375.4 KB |
| Internal Photos Module | Internal Photos | 2014-03-05 | PDF 277.2 KB |
| Int Photos | Internal Photos | 2013-07-15 | PDF 277.2 KB |
| Internal Photo | Internal Photos | 2011-06-28 | PDF 392.3 KB |
| External Photos | External Photos | 2015-09-14 | PDF 1.2 MB |
| ExtPhotos | External Photos | 2014-04-16 | PDF 481.3 KB |
| External Photos | External Photos | 2014-03-05 | PDF 607 KB |
| Ext Photos | External Photos | 2013-07-15 | PDF 1.5 MB |
| External Photo | External Photos | 2011-06-28 | PDF 1.2 MB |
| Label | ID Label/Location Info | 2014-03-05 | PDF 84.3 KB |
| Label Location | ID Label/Location Info | 2014-03-05 | PDF 1.2 MB |
| Label n Location | ID Label/Location Info | 2013-07-15 | PDF 84.3 KB |
| ID label and location | ID Label/Location Info | 2011-06-28 | PDF 148.3 KB |
| Antenna info | Operational Description | 2015-09-14 | PDF 268.5 KB |
| Ant Desc | Operational Description | 2013-07-15 | PDF 1.2 MB |
| Op Desc | Operational Description | 2011-06-28 | PDF 60.3 KB |
| Test setup photos | Test Setup Photos | 2015-09-14 | PDF 1.5 MB |
| Test setup | Test Setup Photos | 2014-04-16 | PDF 310.3 KB |
| Setup Photo | Test Setup Photos | 2013-07-15 | PDF 502.2 KB |
| Test Setup | Test Setup Photos | 2011-06-28 | PDF 1.9 MB |
| Test report | Test Report | 2015-09-14 | PDF 1,015.4 KB |
| Test Report | Test Report | 2014-04-16 | PDF 468.8 KB |
| Setup Photo | Test Report | 2014-03-05 | PDF 365 KB |
| Test Report | Test Report | 2014-03-05 | PDF 480.2 KB |
| Test Report | Test Report | 2013-07-15 | PDF 677.3 KB |
| Test Report | Test Report | 2011-06-28 | PDF 1.2 MB |
| Cover letter | Cover Letter(s) | 2015-09-14 | PDF 24.6 KB |
| C2PC letter | Cover Letter(s) | 2014-04-16 | PDF 18.4 KB |
| ConfReq Letter | Cover Letter(s) | 2014-04-16 | PDF 19.8 KB |
| Prof Inst Letter | Cover Letter(s) | 2014-04-16 | PDF 45.6 KB |
| C2PC Letter | Cover Letter(s) | 2014-03-05 | PDF 19.3 KB |
| ConfReqLetter | Cover Letter(s) | 2014-03-05 | PDF 20.7 KB |
| Mod Req | Cover Letter(s) | 2014-03-05 | PDF 143.5 KB |
| Professional Installation | Cover Letter(s) | 2014-03-05 | PDF 46.7 KB |
| C2PC Request | Cover Letter(s) | 2013-07-15 | PDF 19.4 KB |
| Conf Req | Cover Letter(s) | 2013-07-15 | PDF 24.5 KB |
| ConfidReq | Cover Letter(s) | 2011-06-28 | PDF 131.7 KB |
| Mod Req Letter | Cover Letter(s) | 2011-06-28 | PDF 869.5 KB |
| RF Exp info | RF Exposure Info | 2014-04-16 | PDF 14.8 KB |
| Exposure Info | RF Exposure Info | 2014-03-05 | PDF 15 KB |
| RF Exp Info | RF Exposure Info | 2013-07-15 | PDF 107.6 KB |
| RF Exposure | RF Exposure Info | 2011-06-28 | PDF 107.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 149.6 KB | |
| Host Controller Metadata only | Schematics | PDF 737.7 KB | |
| Host Power Metadata only | Schematics | PDF 125.8 KB | |
| Schematic Host Metadata only | Schematics | PDF 2.5 MB | |
| Schematic RF module Metadata only | Schematics | PDF 205.6 KB |
Application Information
| Application ID | eVi1MUhtMX14HjQOtdgICg== |
|---|---|
| Final Action Date | 2015-09-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013169495 |
| Model | 51306799 |
| Frequency Range | 2405-2475 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Low Cost ISA 100 Radio Module (51306799-001) |
| Responsible Party | David Mitchell Shipley, Approvals Engineer, david.shipley@honeywell.com , 602-293-1555 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | gkiemel@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. This Class II Permissive Change is for use of the module in the Honeywell Wireless Multi-Protocol Receiver (WMPR). Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eVi1MUhtMX14HjQOtdgICg== | 2015-09-14 | Class II permissive change or modification of presently authorized equipment |
| 9AF+6Xcpp3DO+InlpuAoRw== | 2014-04-16 | Class II permissive change or modification of presently authorized equipment |
| df4286tTvNd5nJnx3mxVzg== | 2014-03-05 | Class II permissive change or modification of presently authorized equipment |
| ljD3XzmRkzDbjAFiS5XsEQ== | 2013-07-15 | Class II permissive change or modification of presently authorized equipment |
| 3Zdcw1NIThe22z/BVQ6hyQ== | 2011-06-28 | Original Equipment |
Grants
TCB Grant - Application ljD3XzmRkzDbjAFiS5XsEQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 07/15/2013 Application Dated: 07/05/2013 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LOW COST ISA 100 RADIO MODULE(51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ljD3XzmRkzDbjAFiS5XsEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 07/15/2013 Application Dated: 07/05/2013 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LOW COST ISA 100 RADIO MODULE(51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 09/14/2015 Application Dated: 09/14/2015 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Low Cost ISA 100 Radio Module (51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This Class II Permissive Change is for use of the module in the Honeywell Wireless Multi-Protocol Receiver (WMPR). Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application eVi1MUhtMX14HjQOtdgICg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 09/14/2015 Application Dated: 09/14/2015 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Low Cost ISA 100 Radio Module (51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This Class II Permissive Change is for use of the module in the Honeywell Wireless Multi-Protocol Receiver (WMPR). Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 03/05/2014 Application Dated: 02/26/2014 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SmartRadar Flexline |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is integrated in the SmartRadar Flexline Device. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application df4286tTvNd5nJnx3mxVzg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 03/05/2014 Application Dated: 02/26/2014 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SmartRadar Flexline |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is integrated in the SmartRadar Flexline Device. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 04/16/2014 Application Dated: 03/27/2014 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Field Interface |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.071944 |
| Output Power listed is conducted. This grant is valid only when the module is integrated in the Honeywell Wireless Field Interface Device. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multitransmitter product procedures. End-users may not be provided with the module installation instructions. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 9AF+6Xcpp3DO+InlpuAoRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 04/16/2014 Application Dated: 03/27/2014 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Field Interface |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.071944 |
| Output Power listed is conducted. This grant is valid only when the module is integrated in the Honeywell Wireless Field Interface Device. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multitransmitter product procedures. End-users may not be provided with the module installation instructions. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 06/28/2011 Application Dated: 06/24/2011 |
| Honeywell International Inc. |
| 1860 W. Rose Garden Lane |
| Phoenix, AZ 85027-2708 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LOW COST ISA 100 RADIO MODULE(51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3Zdcw1NIThe22z/BVQ6hyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. 1860 W. Rose Garden Lane Phoenix, AZ 85027-2708 United States |
Date of Grant: 06/28/2011 Application Dated: 06/24/2011 |
| Attention: David Shipley , Approvals Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S5751306799 |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LOW COST ISA 100 RADIO MODULE(51306799-001) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0719 |
| Output Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this module in its final configuration is the responsibility of Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |