FCC ID S7A-SP52
SFx
by SENA TECHNOLOGIES.Inc
Grantee Code: S7A Product Code: SP52
Latest application date: 2018-12-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-24 |
| 2402-2480 MHz | Original Equipment | 2017-12-15 |
| 2402-2480 MHz | Original Equipment | 2017-12-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_Manual | Users Manual | 2019-06-22 | PDF 449.5 KB |
| Users manual | Users Manual | 2018-06-12 | PDF 613.5 KB |
| Internal_Photos | Internal Photos | 2018-12-24 | PDF 218.4 KB |
| Internal photos | Internal Photos | 2018-06-12 | PDF 729.9 KB |
| External_Photos | External Photos | 2018-12-24 | PDF 378.1 KB |
| External photos | External Photos | 2018-06-12 | PDF 402.1 KB |
| Label_and_label_location | ID Label/Location Info | 2018-12-24 | PDF 123.5 KB |
| Label | ID Label/Location Info | 2017-12-15 | PDF 119.4 KB |
| Test Set-up Photo_rev | Test Setup Photos | 2019-06-22 | PDF 400.5 KB |
| Test setup photos | Test Setup Photos | 2018-06-12 | PDF 569.4 KB |
| Test Report_DSS_C2PC_rev | Test Report | 2018-12-24 | PDF 2.9 MB |
| Test Report_DTS_C2PC_rev | Test Report | 2018-12-24 | PDF 2.5 MB |
| Test Report | Test Report | 2017-12-15 | PDF 5.8 MB |
| Test Report | Test Report | 2017-12-15 | PDF 2.6 MB |
| Attestation_Letter_for_MPE | RF Exposure Info | 2018-12-24 | PDF 508.1 KB |
| Agent_Authorization | Cover Letter(s) | 2018-12-24 | PDF 197.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-12-24 | PDF 439.4 KB |
| FCC Short - Long Term Confidentiality Request_rev | Cover Letter(s) | 2018-12-24 | PDF 127.8 KB |
| Authorization Letter | Cover Letter(s) | 2017-12-15 | PDF 16 KB |
| Confidentiality request | Cover Letter(s) | 2017-12-15 | PDF 119.1 KB |
| Cover letter | Cover Letter(s) | 2017-12-15 | PDF 15.2 KB |
| SAR exemption distance | Cover Letter(s) | 2017-12-15 | PDF 225.1 KB |
| RF_Exposure_for_FCC | RF Exposure Info | 2018-12-24 | PDF 78.5 KB |
| RF exposure calculation | RF Exposure Info | 2017-12-15 | PDF 78.2 KB |
| RF exposure for helmet | RF Exposure Info | 2017-12-15 | PDF 225.1 KB |
| RF exposure report | RF Exposure Info | 2017-12-15 | PDF 78.2 KB |
| SAR exemption for helmet | RF Exposure Info | 2017-12-15 | PDF 225.1 KB |
| BLK Metadata only | Block Diagram | PDF 270.7 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 277 KB | |
| block_diagram Metadata only | Block Diagram | PDF 270.7 KB | |
| SCH Metadata only | Schematics | PDF 59.1 KB | |
| Schematics Metadata only | Schematics | PDF 71.6 KB | |
| OP Metadata only | Operational Description | PDF 325.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 341.3 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 92.6 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 203.6 KB |
Application Information
| Application ID | Z4u5sJ1JEU+/e8D7NqkLUg== |
|---|---|
| Final Action Date | 2018-12-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013268917 |
| Model | SP52 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SFx |
| Responsible Party | Seunghyun KIM, Research Engineer, shkim77@sena.com  , 8225718283 |
| Technical Contact | Sena Technologies,Inc., shkim77@sena.com |
| Test Firm | Issac jin, MOVON Test Lab Co., Ltd, danny.kim@dekra.com  , 82-31-338-8837 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/22/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Z4u5sJ1JEU+/e8D7NqkLUg== | 2018-12-24 | Class II permissive change or modification of presently authorized equipment |
| PmhMpZrO9IMzBXMaLBrsMg== | 2018-12-24 | Class II permissive change or modification of presently authorized equipment |
| iU5eteyhHyZM+Te4e9Em9g== | 2017-12-15 | Original Equipment |
| hHA5sZBWVZ3Gt94NoOaE9Q== | 2017-12-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Z4u5sJ1JEU+/e8D7NqkLUg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/24/2018 Application Dated: 12/24/2018 |
| SENA TECHNOLOGIES.Inc |
| 19, Heolleung-ro 569-gil, Gangnam-gu |
| Seoul, South Korea |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SFx |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Class II permissive change. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Z4u5sJ1JEU+/e8D7NqkLUg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu Seoul, South Korea |
Date of Grant: 12/24/2018 Application Dated: 12/24/2018 |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SFx |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Class II permissive change. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/24/2018 Application Dated: 12/24/2018 |
| SENA TECHNOLOGIES.Inc |
| 19, Heolleung-ro 569-gil, Gangnam-gu |
| Seoul, South Korea |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SFx |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.062 |
| Class II permissive change. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PmhMpZrO9IMzBXMaLBrsMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu Seoul, South Korea |
Date of Grant: 12/24/2018 Application Dated: 12/24/2018 |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SFx |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.062 |
| Class II permissive change. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/15/2017 Application Dated: 12/14/2017 |
| SENA TECHNOLOGIES.Inc |
| 19, Heolleung-ro 569-gil, Gangnam-gu |
| Seoul, South Korea |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SFx |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.062 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iU5eteyhHyZM+Te4e9Em9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu Seoul, South Korea |
Date of Grant: 12/15/2017 Application Dated: 12/14/2017 |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SFx |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.062 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/15/2017 Application Dated: 12/14/2017 |
| SENA TECHNOLOGIES.Inc |
| 19, Heolleung-ro 569-gil, Gangnam-gu |
| Seoul, South Korea |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SFx |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hHA5sZBWVZ3Gt94NoOaE9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu Seoul, South Korea |
Date of Grant: 12/15/2017 Application Dated: 12/14/2017 |
| Attention: Seunghyun KIM , Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S7A-SP52 |
| Name of Grantee: | SENA TECHNOLOGIES.Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SFx |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 40 mm from the user's head and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |