FCC ID S9E-121132

EDB10

by Trimble Inc.

Grantee Code: S9E   Product Code: 121132
Latest application date: 2021-08-19

FCC ID Device Details

FCC IDS9E-121132
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9E
Product Code121132
Applicant BusinessTrimble Inc. 🇺🇸
Related Domains trimble.com dekra.com
Equipment ClassEDB10
Test FirmDEKRA TESTING AND CERTIFICATION CO., LTD. LinKou

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-08-19
2402-2480 MHzOriginal Equipment2021-08-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2021-08-19PDF 4 MB
Internal PhotosInternal Photos2021-08-19PDF 1.7 MB
External PhotosExternal Photos2021-08-19PDF 334.1 KB
ID LabelID Label/Location Info2021-08-19PDF 113.2 KB
Label LocationID Label/Location Info2021-08-19PDF 346.5 KB
Test Setup Photos_DTSTest Setup Photos2021-08-19PDF 346.5 KB
Test Report_BLETest Report2021-08-19PDF 1.2 MB
Test Report_DSSTest Report2021-08-19PDF 2.2 MB
Test Report_WLANTest Report2021-08-19PDF 2.9 MB
Confidentiality RequestCover Letter(s)2021-08-19PDF 152 KB
Declaration of authorizationCover Letter(s)2021-08-19PDF 225.3 KB
RF Exposure ReportRF Exposure Info2021-08-19PDF 312.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 77.9 KB
Schematics Metadata onlySchematicsPDF 479.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 224.5 KB

Application Information

Application IDIZwsX93mhEBR3GWvOudDxQ==
Final Action Date2021-08-19
Application PurposeOriginal Equipment
Applicant FRN0013284146
Model121132
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionEDB10
Responsible PartyKatherine Allen, Compliance Engineer, katherine_allen@trimble.com , 541-750-9385
AgentVincent Vincent Vincent, DEKRA TESTING AND CERTIFICATION CO., LTD., 886-2-8601-3788
Technical ContactFrank Yen, DEKRA Testing and Certification Co., Ltd., frank.yen@dekra.com , 886-2-8601-3788
Non-Technical ContactFrank Yen, DEKRA Testing and Certification Co., Ltd., frank.yen@dekra.com , 886-2-8601-3788
Test FirmMirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode.

Applications

Application IDDatePurpose
IZwsX93mhEBR3GWvOudDxQ==2021-08-19Original Equipment
2QA2bpkKPYLNZNDU3bAUqw==2021-08-19Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.007600015C
2402-2480 MHz0.006515C
2412-2462 MHz0.3115C

Grants

TCB Grant - Application IZwsX93mhEBR3GWvOudDxQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/19/2021

Application Dated: 08/11/2021
Trimble Inc.
5475 Kellenburger Rd.
Dayton, OH 45424
 
Attention: Katherine Allen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9E-121132
Name of Grantee:  Trimble Inc.
Equipment Class: Digital Transmission System
Notes: EDB10
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0065  
15C 2412.0  -  2462.0 0.31  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode.

EAS Grant - Application IZwsX93mhEBR3GWvOudDxQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Trimble Inc.
5475 Kellenburger Rd.
Dayton, OH 45424
United States
  Date of Grant: 08/19/2021

Application Dated: 08/11/2021
 
Attention: Katherine Allen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9E-121132
Name of Grantee:  Trimble Inc.
Equipment Class: Digital Transmission System
Notes: EDB10
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0065  
15C 2412.0  -  2462.0 0.31  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode.



TCB Grant - Application 2QA2bpkKPYLNZNDU3bAUqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/19/2021

Application Dated: 08/11/2021
Trimble Inc.
5475 Kellenburger Rd.
Dayton, OH 45424
 
Attention: Katherine Allen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9E-121132
Name of Grantee:  Trimble Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EDB10
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0076  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 2QA2bpkKPYLNZNDU3bAUqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Trimble Inc.
5475 Kellenburger Rd.
Dayton, OH 45424
United States
  Date of Grant: 08/19/2021

Application Dated: 08/11/2021
 
Attention: Katherine Allen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9E-121132
Name of Grantee:  Trimble Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EDB10
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0076  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: