FCC ID S9E-LYRA24P
Bluetooth Radio Module
by Trimble Inc.
Grantee Code: S9E Product Code: LYRA24P
Latest application date: 2025-11-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQG-LYRA24P Grant Date: 07/11/2023 | 2025-03-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQG-LYRA24P Grant Date: 07/11/2023 | 2025-03-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2025-11-18 | PDF 1.6 MB |
| Manual | Users Manual | 2025-06-06 | PDF 1.3 MB |
| External Photos | External Photos | 2025-11-18 | PDF 361.3 KB |
| External Photos | External Photos | 2025-06-06 | PDF 1.4 MB |
| External Photos | External Photos | 2025-03-25 | PDF 217.2 KB |
| Label | ID Label/Location Info | 2025-03-25 | PDF 295.1 KB |
| Test setup photos | Test Setup Photos | 2025-11-18 | PDF 290.5 KB |
| Test setup photos | Test Setup Photos | 2025-06-06 | PDF 613.1 KB |
| Test Report | Test Report | 2025-11-18 | PDF 2 MB |
| antenna | Test Report | 2025-11-18 | PDF 346.4 KB |
| Test Report | Test Report | 2025-06-06 | PDF 1.5 MB |
| Test Report | Test Report | 2025-06-06 | PDF 1.8 MB |
| antenna | Test Report | 2025-06-06 | PDF 1.5 MB |
| test report | Test Report | 2025-06-06 | PDF 1.8 MB |
| test report | Test Report | 2025-06-06 | PDF 1.6 MB |
| Attestation | Attestation Statements | 2025-11-18 | PDF 452.2 KB |
| Attestation letter 2.911(D)(5) | Attestation Statements | 2025-11-18 | PDF 462.7 KB |
| Attestation letter 2.911(D)(7) | Attestation Statements | 2025-11-18 | PDF 470.6 KB |
| Attestation statement | Attestation Statements | 2025-03-25 | PDF 452.2 KB |
| cover letter | Cover Letter(s) | 2025-11-18 | PDF 174.3 KB |
| cover letter | Cover Letter(s) | 2025-06-06 | PDF 443.6 KB |
| Authorization to sign | Cover Letter(s) | 2025-03-25 | PDF 443.6 KB |
| cover letter | Cover Letter(s) | 2025-03-25 | PDF 440.9 KB |
| RF Exposure report | RF Exposure Info | 2025-11-18 | PDF 1.4 MB |
| RF Exposure report | RF Exposure Info | 2025-06-06 | PDF 1.3 MB |
Application Information
| Application ID | gdwmwaI3xE3ydjzUhR9Xyg== |
|---|---|
| Final Action Date | 2025-11-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013284146 |
| Model | LYRA24P |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth Radio Module |
| Responsible Party | Katherine Allen, katherine_allen@trimble.com  , 541-750-9385 |
| Test Firm | Adam Alger, Ezurio, Adam.Alger@ezurio.com  , 262 375 3091 |
| TCB Email | US-certification@cetecom.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gdwmwaI3xE3ydjzUhR9Xyg== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| UwmHNNXWrC/YhqfKKs3M1A== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| l3+JsUmzIpuihXL3ejZIqA== | 2025-06-06 | Class II permissive change or modification of presently authorized equipment |
| OE1zkk7E4mELuXdnE/Gq1A== | 2025-06-06 | Class II permissive change or modification of presently authorized equipment |
| tjHoSg/4KGfYCPT5OMoKZQ== | 2025-03-25 | Change in identification of presently authorized equipment. Original FCC ID: SQG-LYRA24P Grant Date: 07/11/2023 |
| ETeqyeUxxT0YE9U9JEWRqw== | 2025-03-25 | Change in identification of presently authorized equipment. Original FCC ID: SQG-LYRA24P Grant Date: 07/11/2023 |
Equipment Authorization
| Frequency | Output |
|---|---|
| 2402-2480 MHz | 0.0980000 |
| 2402-2480 MHz | 0.0990000 |
Grants
TCB Grant - Application UwmHNNXWrC/YhqfKKs3M1A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 11/18/2025 Application Dated: 11/17/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.099 |
| Permissive change adding additional antenna RF trace and filter. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 4 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
TCB Grant - Application tjHoSg/4KGfYCPT5OMoKZQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 03/25/2025 Application Dated: 03/25/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.098 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. |
TCB Grant - Application OE1zkk7E4mELuXdnE/Gq1A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 06/06/2025 Application Dated: 06/06/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.099 |
| Permissive change adding additional antenna, details specified in filing. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 4 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
TCB Grant - Application l3+JsUmzIpuihXL3ejZIqA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 06/06/2025 Application Dated: 06/06/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.098 |
| Permissive change adding additional antenna, details specified in filing. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 4 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. |
TCB Grant - Application gdwmwaI3xE3ydjzUhR9Xyg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 11/18/2025 Application Dated: 11/18/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.098 |
| Permissive change adding additional antenna RF trace and filter. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 4 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
TCB Grant - Application ETeqyeUxxT0YE9U9JEWRqw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 03/25/2025 Application Dated: 03/25/2025 |
| Trimble Inc. |
| 5475 Kellenburger Rd. |
| Dayton, OH 45424 |
| Attention: Katherine Allen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | S9E-LYRA24P |
| Name of Grantee: | Trimble Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.099 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |