FCC ID S9GR300

802.11 a/b/g/n Wireless Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: R300
Latest application date: 2016-05-13

FCC ID Device Details

FCC IDS9GR300
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeR300
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment Class802.11 a/b/g/n Wireless Access Point
Test FirmBay Area Compliance Laboratories Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-05-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2014-07-31
5180-5240 MHzOriginal Equipment2013-08-15
2412-2462 MHzOriginal Equipment2013-08-15

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2013-08-15PDF 765.1 KB
Int PhotosInternal Photos2016-05-13PDF 293 KB
EUT Internal PhotosInternal Photos2014-07-31PDF 396.3 KB
Internal PhotosInternal Photos2013-08-15PDF 409.8 KB
Internal PhotosInternal Photos2013-08-15PDF 410.5 KB
Ext PhotosExternal Photos2016-05-13PDF 376.3 KB
EUT External PhotosExternal Photos2014-07-31PDF 259.9 KB
External PhotosExternal Photos2013-08-15PDF 259.8 KB
External PhotosExternal Photos2013-08-15PDF 260.4 KB
FCC ID LabelID Label/Location Info2016-05-13PDF 333.5 KB
Label drawingID Label/Location Info2014-07-31PDF 333.5 KB
Setup PhotosTest Setup Photos2016-05-13PDF 523.5 KB
Test Setup photosTest Setup Photos2014-07-31PDF 282.8 KB
Test Setup PhotosTest Setup Photos2013-08-15PDF 512.1 KB
Test Setup PhotosTest Setup Photos2013-08-15PDF 509.1 KB
DFS ReportTest Report2016-05-13PDF 2 MB
Test ReportTest Report2016-05-13PDF 2.2 MB
DFS ReportTest Report2014-07-31PDF 2.1 MB
Radio ReportTest Report2014-07-31PDF 3.1 MB
Test ReportTest Report2013-08-15PDF 1.5 MB
Test ReportTest Report2013-08-15PDF 3.4 MB
C2PC LetterCover Letter(s)2016-05-13PDF 138.3 KB
CIIPC Declaration letterCover Letter(s)2014-07-31PDF 85.3 KB
FCC Agent AuthorizationCover Letter(s)2014-07-31PDF 85.2 KB
Software Configuration ControlCover Letter(s)2014-07-31PDF 85.7 KB
Confidentiality LetterCover Letter(s)2013-08-15PDF 89.7 KB
POACover Letter(s)2013-08-15PDF 85.2 KB
RF ExposureRF Exposure Info2016-05-13PDF 22.3 KB
RF ExposureRF Exposure Info2014-07-31PDF 77 KB
RF Exposure InfoRF Exposure Info2013-08-15PDF 25.3 KB
RF Exposure InfoRF Exposure Info2013-08-15PDF 27.3 KB
PAG Approved Metadata onlyOperational DescriptionPDF 75.9 KB
SW Security Description Metadata onlyOperational DescriptionPDF 454.8 KB

Application Information

Application IDpfXvMGdCqI/11K4VCaFxfg==
Final Action Date2016-05-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelR300
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11 a/b/g/n Wireless Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmLisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change of updating U-NII bands under new rules documented in this filing. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
pfXvMGdCqI/11K4VCaFxfg==2016-05-13Class II permissive change or modification of presently authorized equipment
lU19b84m+5RXfBl/HLBsmA==2014-07-31Class II permissive change or modification of presently authorized equipment
pjFvAU+oXX1MWFXJy/7oNQ==2013-08-15Original Equipment
3Be6QDlTL2j5Wst7j2ONWA==2013-08-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.968315CCC
2412-2462 MHz0.899515CCC, MO
2422-2452 MHz0.85715CCC, MO
5180-5240 MHz0.17515E38, CC, MO
5180-5240 MHz0.039415ECC, MO
5190-5230 MHz0.17815E38, CC, MO
5190-5230 MHz0.049515ECC, MO
5260-5320 MHz0.13315ECC, MO, ND
5260-5320 MHz0.13315E38, CC, MO, ND
5500-5580 MHz0.12215ECC, MO, ND
5500-5700 MHz0.12215E38, CC, MO, ND
5660-5700 MHz0.12215ECC, MO, ND
5745-5825 MHz0.950615CCC
5745-5825 MHz0.18915E38, CC, MO
5745-5825 MHz0.905715CCC, MO
5755-5795 MHz0.939815CCC, MO

Grants

TCB Grant - Application pjFvAU+oXX1MWFXJy/7oNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/15/2013

Application Dated: 08/15/2013
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Clinton Bradley , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0394  
CC MO 15E 5190.0  -  5230.0 0.0495  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pjFvAU+oXX1MWFXJy/7oNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 08/15/2013

Application Dated: 08/15/2013
 
Attention: Clinton Bradley , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0394  
CC MO 15E 5190.0  -  5230.0 0.0495  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application pfXvMGdCqI/11K4VCaFxfg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 05/13/2016

Application Dated: 04/08/2016
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g/n Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.175  
38 CC MO 15E 5190.0  -  5230.0 0.178  
38 CC MO ND 15E 5260.0  -  5320.0 0.133  
38 CC MO ND 15E 5500.0  -  5700.0 0.122  
38 CC MO 15E 5745.0  -  5825.0 0.189  

Class II Permissive Change of updating U-NII bands under new rules documented in this filing. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application pfXvMGdCqI/11K4VCaFxfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 05/13/2016

Application Dated: 04/08/2016
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g/n Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.175  
38 CC MO 15E 5190.0  -  5230.0 0.178  
38 CC MO ND 15E 5260.0  -  5320.0 0.133  
38 CC MO ND 15E 5500.0  -  5700.0 0.122  
38 CC MO 15E 5745.0  -  5825.0 0.189  

Class II Permissive Change of updating U-NII bands under new rules documented in this filing. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application lU19b84m+5RXfBl/HLBsmA==

This application does not exist.

EAS Grant - Application lU19b84m+5RXfBl/HLBsmA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 07/31/2014

Application Dated: 01/21/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0394  
CC MO ND 15E 5260.0  -  5320.0 0.133  
CC MO ND 15E 5500.0  -  5580.0 0.122  
CC MO ND 15E 5660.0  -  5700.0 0.122  

This device has 20 and 40 MHz BW modes. Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 3Be6QDlTL2j5Wst7j2ONWA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/15/2013

Application Dated: 08/15/2013
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Clinton Bradley , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.9683  
CC MO 15C 2412.0  -  2462.0 0.8995  
CC MO 15C 2422.0  -  2452.0 0.857  
CC 15C 5745.0  -  5825.0 0.9506  
CC MO 15C 5745.0  -  5825.0 0.9057  
CC MO 15C 5755.0  -  5795.0 0.9398  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 3Be6QDlTL2j5Wst7j2ONWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 08/15/2013

Application Dated: 08/15/2013
 
Attention: Clinton Bradley , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR300
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.9683  
CC MO 15C 2412.0  -  2462.0 0.8995  
CC MO 15C 2422.0  -  2452.0 0.857  
CC 15C 5745.0  -  5825.0 0.9506  
CC MO 15C 5745.0  -  5825.0 0.9057  
CC MO 15C 5755.0  -  5795.0 0.9398  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: