FCC ID S9GR500

IEEE 802.11 ac Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: R500
Latest application date: 2015-03-23

FCC ID Device Details

FCC IDS9GR500
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeR500
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassIEEE 802.11 ac Access Point
Test FirmBay Area Compliance Laboratories Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-03-23
2412-2462 MHzOriginal Equipment2014-09-02
5180-5240 MHzOriginal Equipment2014-09-02

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2014-09-02PDF 718.7 KB
Int PhotosInternal Photos2015-03-23PDF 308.5 KB
Int PhotosInternal Photos2014-09-02PDF 381 KB
Int PhotosInternal Photos2014-09-02PDF 380.9 KB
Ext PhotosExternal Photos2015-03-23PDF 292.4 KB
Ext PhotosExternal Photos2014-09-02PDF 294.6 KB
Ext PhotosExternal Photos2014-09-02PDF 294.7 KB
FCC ID LabelID Label/Location Info2015-03-23PDF 625.1 KB
Setup PhotosTest Setup Photos2015-03-23PDF 312.8 KB
Setup PhotosTest Setup Photos2014-09-02PDF 319.6 KB
Setup PhotosTest Setup Photos2014-09-02PDF 319.6 KB
DFS ReportTest Report2015-03-23PDF 2.4 MB
Test ReportTest Report2015-03-23PDF 2.2 MB
Test ReportTest Report2014-09-02PDF 1.8 MB
Test ReportTest Report2014-09-02PDF 2.5 MB
CIIPC LetterCover Letter(s)2015-03-23PDF 85.3 KB
Confidentiality LetterCover Letter(s)2015-03-23PDF 89.1 KB
Confidentiality LetterCover Letter(s)2014-09-02PDF 89.7 KB
POACover Letter(s)2014-09-02PDF 85.2 KB
RF ExposureRF Exposure Info2015-03-23PDF 22.9 KB
RF ExposureRF Exposure Info2014-09-02PDF 25.3 KB
RF ExposureRF Exposure Info2014-09-02PDF 22.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 44.6 KB
Schematics Metadata onlySchematicsPDF 644.6 KB
NII Device Security Declaration Metadata onlyOperational DescriptionPDF 425.4 KB
NII Device Security Declaration Rev Metadata onlyOperational DescriptionPDF 427.9 KB
Operation Description Metadata onlyOperational DescriptionPDF 57.5 KB
PBA Approval Metadata onlyOperational DescriptionPDF 76 KB

Application Information

Application IDnvw7Tzuz6qPqp24aRULFVg==
Final Action Date2015-03-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelR500
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE 802.11 ac Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmLisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change of adding DFS bands. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
nvw7Tzuz6qPqp24aRULFVg==2015-03-23Class II permissive change or modification of presently authorized equipment
BFole1sKpQRsXzb7LjgCCg==2014-09-02Original Equipment
+TMLiEVCoNNEK3noY+E9PA==2014-09-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.205000015CCC, MO
5180-5240 MHz0.23215ECC, MO
5180-5240 MHz0.23215E38, CC, MO
5260-5320 MHz0.19115E38, CC, MO, ND
5500-5700 MHz0.16315E38, CC, MO, ND
5745-5825 MHz0.32715ECC, MO
5745-5825 MHz0.32715E38, CC, MO

Grants

TCB Grant - Application nvw7Tzuz6qPqp24aRULFVg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/23/2015

Application Dated: 12/09/2014
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.232  
38 CC MO ND 15E 5260.0  -  5320.0 0.191  
38 CC MO ND 15E 5500.0  -  5700.0 0.163  
38 CC MO 15E 5745.0  -  5825.0 0.327  

Class II Permissive Change of adding DFS bands. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application nvw7Tzuz6qPqp24aRULFVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 03/23/2015

Application Dated: 12/09/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.232  
38 CC MO ND 15E 5260.0  -  5320.0 0.191  
38 CC MO ND 15E 5500.0  -  5700.0 0.163  
38 CC MO 15E 5745.0  -  5825.0 0.327  

Class II Permissive Change of adding DFS bands. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BFole1sKpQRsXzb7LjgCCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/02/2014

Application Dated: 09/02/2014
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.205  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device has 20 MHz, 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BFole1sKpQRsXzb7LjgCCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 09/02/2014

Application Dated: 09/02/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.205  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device has 20 MHz, 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application +TMLiEVCoNNEK3noY+E9PA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/02/2014

Application Dated: 09/02/2014
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.327  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoor usage only. The device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application +TMLiEVCoNNEK3noY+E9PA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 09/02/2014

Application Dated: 09/02/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR500
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.232  
CC MO 15E 5745.0  -  5825.0 0.327  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in the 5.15-5.25 GHz band is restricted to indoor usage only. The device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: