1. FCC ID
  2. S9G
  3. S9GR730

FCC ID S9GR730

R730 Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: R730
Latest application date: 2018-09-06

FCC ID Device Details

FCC IDS9GR730
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeR730
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassR730 Access Point
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-09-06
2402-2480 MHzOriginal Equipment2018-08-22
5180-5240 MHzOriginal Equipment2018-08-22

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-03-05PDF 438 KB
User Manual Regulatory FlyerUsers Manual2019-03-05PDF 710.4 KB
Internal PhotosInternal Photos2019-03-05PDF 658.8 KB
External PhotosExternal Photos2019-03-05PDF 291.1 KB
Product LabelID Label/Location Info2018-09-06PDF 363.6 KB
Test Setup PhotosTest Setup Photos2019-03-05PDF 350.7 KB
DFS Test ReportTest Report2018-09-06PDF 5.4 MB
NII Test Report W5356 Part 1Test Report2018-09-06PDF 4.9 MB
NII Test Report W5356 Part 2Test Report2018-09-06PDF 5.3 MB
NII Test Report W5356 Part 3Test Report2018-09-06PDF 5.2 MB
NII Test Report W5356 Part 4Test Report2018-09-06PDF 5.2 MB
NII Test Report W5356 Part 5Test Report2018-09-06PDF 5.2 MB
NII Test Report W5356 Part 6Test Report2018-09-06PDF 5.3 MB
NII Test Report W5356 Part 7Test Report2018-09-06PDF 5.3 MB
NII Test Report W5356 Part 8Test Report2018-09-06PDF 4.8 MB
NII Test Report W5356 Part 9Test Report2018-09-06PDF 540.2 KB
DTS Test Report (BLE)Test Report2018-08-22PDF 2.3 MB
DTS Test Report (WiFi) Part 1Test Report2018-08-22PDF 5 MB
DTS Test Report (WiFi) Part 2Test Report2018-08-22PDF 4.4 MB
DTS Test Report (Zigbee)Test Report2018-08-22PDF 2.3 MB
NII Test Report Part 1Test Report2018-08-22PDF 4.9 MB
NII Test Report Part 2Test Report2018-08-22PDF 5.2 MB
NII Test Report Part 3Test Report2018-08-22PDF 5.2 MB
NII Test Report Part 4Test Report2018-08-22PDF 5.3 MB
NII Test Report Part 5Test Report2018-08-22PDF 5.3 MB
NII Test Report Part 6Test Report2018-08-22PDF 4.9 MB
NII Test Report Part 7Test Report2018-08-22PDF 589.8 KB
Professional Installation AttestationCover Letter(s)2018-09-06PDF 557.4 KB
DFS Band AttestationCover Letter(s)2018-08-22PDF 555.4 KB
Class II Permissive Change LetterCover Letter(s)2018-09-06PDF 156.3 KB
Confidentiality Request Letter (Short Term)Cover Letter(s)2018-09-06PDF 483.5 KB
Product Certification Representative Auth LetterCover Letter(s)2018-09-06PDF 483.3 KB
Confidentiality Request Letter (Long Term)Cover Letter(s)2018-08-22PDF 483.9 KB
WiFi Channel 12 and 13 Declaration LetterCover Letter(s)2018-08-22PDF 480 KB
MPE CalculationRF Exposure Info2018-09-06PDF 99.1 KB
MPE CalculationRF Exposure Info2018-08-22PDF 96.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 122 KB
Parts Layout Metadata onlySchematicsPDF 286.1 KB
Parts Placement Metadata onlySchematicsPDF 286.1 KB
Schematics Metadata onlySchematicsPDF 1.8 MB
Antenna Spec Metadata onlyOperational DescriptionPDF 917.2 KB
NII Software Security Metadata onlyOperational DescriptionPDF 617.6 KB
NII Software Security Description Metadata onlyOperational DescriptionPDF 617.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 122 KB

Application Information

Application IDig2Kqtlm9MwYd7gMM83EXA==
Final Action Date2018-09-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelR730
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionR730 Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/05/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC to add DFS bands via SW. Original grant comment: Power listed is the maximum combined conducted output power. Device is certified as 15.407(a)(1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 and 8x8 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ig2Kqtlm9MwYd7gMM83EXA==2018-09-06Class II permissive change or modification of presently authorized equipment
YXJGTVlTLFakDXN8rgQOTA==2018-08-22Original Equipment
UJkE2HcCrkYIxBiR08aF0A==2018-08-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.073315CCC
2405-2475 MHz0.123915CCC, MO
2412-2462 MHz0.714515CCC, MO
5180-5240 MHz0.803515ECC, MO
5260-5320 MHz0.11315ECC, MO, ND
5500-5700 MHz0.116415ECC, MO, ND
5745-5825 MHz0.666815ECC, MO

Grants

TCB Grant - Application YXJGTVlTLFakDXN8rgQOTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 08/22/2018

Application Dated: 08/20/2018
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: R730 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0733  
CC MO 15C 2405.0  -  2475.0 0.1239  
CC MO 15C 2412.0  -  2462.0 0.7145  

Power listed is the maximum combined conducted output power. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YXJGTVlTLFakDXN8rgQOTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States 		  Date of Grant: 08/22/2018

Application Dated: 08/20/2018
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: R730 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0733  
CC MO 15C 2405.0  -  2475.0 0.1239  
CC MO 15C 2412.0  -  2462.0 0.7145  

Power listed is the maximum combined conducted output power. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application UJkE2HcCrkYIxBiR08aF0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 08/22/2018

Application Dated: 08/22/2018
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: R730 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.8035  
CC MO 15E 5745.0  -  5825.0 0.6668  

Power listed is the maximum combined conducted output power. Device is certified as 15.407(a)(1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 and 8x8 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UJkE2HcCrkYIxBiR08aF0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States 		  Date of Grant: 08/22/2018

Application Dated: 08/22/2018
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: R730 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.8035  
CC MO 15E 5745.0  -  5825.0 0.6668  

Power listed is the maximum combined conducted output power. Device is certified as 15.407(a)(1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 and 8x8 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ig2Kqtlm9MwYd7gMM83EXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 09/06/2018

Application Dated: 08/31/2018
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: R730 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.8035  
CC MO ND 15E 5260.0  -  5320.0 0.113  
CC MO ND 15E 5500.0  -  5700.0 0.1164  
CC MO 15E 5745.0  -  5825.0 0.6668  

C2PC to add DFS bands via SW.

Original grant comment: Power listed is the maximum combined conducted output power. Device is certified as 15.407(a)(1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 and 8x8 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ig2Kqtlm9MwYd7gMM83EXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States 		  Date of Grant: 09/06/2018

Application Dated: 08/31/2018
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GR730
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: R730 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.8035  
CC MO ND 15E 5260.0  -  5320.0 0.113  
CC MO ND 15E 5500.0  -  5700.0 0.1164  
CC MO 15E 5745.0  -  5825.0 0.6668  

C2PC to add DFS bands via SW.

Original grant comment: Power listed is the maximum combined conducted output power. Device is certified as 15.407(a)(1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 and 8x8 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: