FCC ID S9GT710

ZoneFlex T710 Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: T710
Latest application date: 2016-02-25

FCC ID Device Details

FCC IDS9GT710
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeT710
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassZoneFlex T710 Access Point
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-02-25
2412-2462 MHzOriginal Equipment2016-02-12
5180-5240 MHzOriginal Equipment2016-02-12

Exhibits

DocumentTypeAvailableFile
Draft Regulatory StatementUsers Manual2016-08-10PDF 244.2 KB
Users ManualUsers Manual2016-08-10PDF 1.5 MB
Internal PhotosInternal Photos2016-08-11PDF 633.3 KB
External PhotosExternal Photos2016-08-11PDF 378.7 KB
Label LocationID Label/Location Info2016-02-12PDF 92.3 KB
Label T710ID Label/Location Info2016-02-12PDF 261.8 KB
Label T710sID Label/Location Info2016-02-12PDF 265 KB
T710 LabelID Label/Location Info2016-02-12PDF 261.8 KB
T710s LabelID Label/Location Info2016-02-12PDF 265 KB
DFS Test Setup PhotoTest Setup Photos2016-08-11PDF 116.3 KB
RF Test Setup PhotosTest Setup Photos2016-08-11PDF 271 KB
Test Setup PhotosTest Setup Photos2016-08-10PDF 269.5 KB
DFS Test Report T710Test Report2016-02-25PDF 3.9 MB
Test Report DFS T710Test Report2016-02-25PDF 3.8 MB
Test Report DFS T710sTest Report2016-02-25PDF 3.8 MB
Test Report NII Part 1 (T710)Test Report2016-02-25PDF 4.2 MB
Test Report NII Part 1 (T710s)Test Report2016-02-25PDF 4.4 MB
Test Report NII Part 2 (T710)Test Report2016-02-25PDF 2.8 MB
Test Report NII Part 2 (T710s)Test Report2016-02-25PDF 2.3 MB
Test Report NII T710 part 1Test Report2016-02-25PDF 3.5 MB
Test Report NII T710 part 2Test Report2016-02-25PDF 3.6 MB
Test Report NII T710 part 3Test Report2016-02-25PDF 2.6 MB
ZoneFlex T710 Access Point Installation AddendumTest Report2016-02-25PDF 709.6 KB
DTS Test Report T710sTest Report2016-02-12PDF 4.1 MB
DTS Test Report part 1 T710Test Report2016-02-12PDF 3.4 MB
DTS Test Report part 1 T710s Metadata onlyTest Report2016-02-12PDF 4.1 MB
DTS Test Report part 2 T710Test Report2016-02-12PDF 2.3 MB
Test Report NII T710 part 1Test Report2016-02-12PDF 3.5 MB
Test Report NII T710 part 2Test Report2016-02-12PDF 3.7 MB
Test Report NII T710 part 3 Metadata onlyTest Report2016-02-12PDF 1.6 MB
Test Report NII T710s part 1Test Report2016-02-12PDF 3.5 MB
Test Report NII T710s part 2Test Report2016-02-12PDF 2.9 MB
Test Report T710 DTSTest Report2016-02-12PDF 3 MB
Test Report T710 NII part 1Test Report2016-02-12PDF 3.9 MB
Test Report T710 NII part 2Test Report2016-02-12PDF 3.4 MB
Test Report T710s DTSTest Report2016-02-12PDF 3 MB
Test Report T710s NII part 1Test Report2016-02-12PDF 3.5 MB
Test Report T710s NII part 2Test Report2016-02-12PDF 2.9 MB
DFS Band AttestationCover Letter(s)2016-02-12PDF 396.9 KB
Professional Installation AttestationCover Letter(s)2016-02-12PDF 286.1 KB
Professional Installer AttestationCover Letter(s)2016-02-12PDF 286.1 KB
Confidentiality LetterCover Letter(s)2016-02-25PDF 692 KB
Permissive Change Request LetterCover Letter(s)2016-02-25PDF 547.4 KB
Product Certification Rep Auth LetterCover Letter(s)2016-02-25PDF 506.2 KB
Confidentiality LetterCover Letter(s)2016-02-12PDF 682.4 KB
Model Similarities DeclarationCover Letter(s)2016-02-12PDF 758.5 KB
Model Similarities Declaration LetterCover Letter(s)2016-02-12PDF 758.5 KB
Product Certification Rep Auth LetterCover Letter(s)2016-02-12PDF 504.8 KB
Regulatory Warnings ExplanationCover Letter(s)2016-02-12PDF 318.8 KB
WiFi 12 and 13 Declaration LetterCover Letter(s)2016-02-12PDF 144.9 KB
WiFi Band 12 and 13 Declaration Letter Metadata onlyCover Letter(s)2016-02-12PDF 404.7 KB
T710 MPE CalculationRF Exposure Info2016-02-25PDF 85.8 KB
T710s MPE CalculationRF Exposure Info2016-02-25PDF 85.9 KB
MPE Calculation Metadata onlyRF Exposure Info2016-02-12PDF 86.3 KB
MPE Calculation T710RF Exposure Info2016-02-12PDF 86.3 KB
MPE Calculation T710sRF Exposure Info2016-02-12PDF 85.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 99.5 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Multiple KDB Summary Metadata onlyOperational DescriptionPDF 74.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 268.2 KB
Software Security Metadata onlyOperational DescriptionPDF 456.9 KB
Software Security Declaration Metadata onlyOperational DescriptionPDF 456.9 KB

Application Information

Application IDTZ4mVelnzrq0W+MHwsbxMA==
Final Action Date2016-02-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelT710
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionZoneFlex T710 Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/11/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC to add DFS bands. This device is an outdoor AP per 15.407(a)(1)i. Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

Applications

Application IDDatePurpose
TZ4mVelnzrq0W+MHwsbxMA==2016-02-25Class II permissive change or modification of presently authorized equipment
H/RHuYugdjcsSKXWzqAPKw==2016-02-12Original Equipment
2nYL+KupyXzstgECoEAlqg==2016-02-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.453000015CCC, MO
5180-5240 MHz0.45915E38, CC, MO
5260-5320 MHz0.13815E38, CC, MO, ND
5500-5700 MHz0.13115E38, CC, MO, ND
5745-5825 MHz0.40215E38, CC, MO

Grants

TCB Grant - Application TZ4mVelnzrq0W+MHwsbxMA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/25/2016

Application Dated: 02/12/2016
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ZoneFlex T710 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.459  
38 CC MO ND 15E 5260.0  -  5320.0 0.138  
38 CC MO ND 15E 5500.0  -  5700.0 0.131  
38 CC MO 15E 5745.0  -  5825.0 0.402  

C2PC to add DFS bands. This device is an outdoor AP per 15.407(a)(1)i. Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application TZ4mVelnzrq0W+MHwsbxMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 02/25/2016

Application Dated: 02/12/2016
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ZoneFlex T710 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.459  
38 CC MO ND 15E 5260.0  -  5320.0 0.138  
38 CC MO ND 15E 5500.0  -  5700.0 0.131  
38 CC MO 15E 5745.0  -  5825.0 0.402  

C2PC to add DFS bands. This device is an outdoor AP per 15.407(a)(1)i. Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application H/RHuYugdjcsSKXWzqAPKw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/12/2016

Application Dated: 02/11/2016
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: ZoneFlex T710 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.453  

Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application H/RHuYugdjcsSKXWzqAPKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 02/12/2016

Application Dated: 02/11/2016
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: ZoneFlex T710 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.453  

Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2nYL+KupyXzstgECoEAlqg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/12/2016

Application Dated: 02/11/2016
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ZoneFlex T710 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.459  
38 CC MO 15E 5745.0  -  5825.0 0.402  

Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operation in 5.15-5.25 GHz band is for indoor use only. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2nYL+KupyXzstgECoEAlqg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 02/12/2016

Application Dated: 02/11/2016
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT710
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ZoneFlex T710 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.459  
38 CC MO 15E 5745.0  -  5825.0 0.402  

Power Output listed is the maximum combined conducted output power. Professional Installation required. Device is a 4x4 MIMO device in a cross-polarized configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operation in 5.15-5.25 GHz band is for indoor use only. The antennas used for this transmitter shall be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: