FCC ID S9GT811CM

T811-CM Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: T811CM
Latest application date: 2018-02-16

FCC ID Device Details

FCC IDS9GT811CM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeT811CM
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassT811-CM Access Point
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-02-16
2412-2462 MHzOriginal Equipment2017-10-25
5180-5240 MHzOriginal Equipment2017-10-25

Exhibits

DocumentTypeAvailableFile
Regulatory InsertUsers Manual2018-08-15PDF 256.2 KB
User ManualUsers Manual2018-08-15PDF 894.3 KB
User Manual Regulatory Statement Metadata onlyUsers Manual2018-08-15PDF 403 KB
Installation ManualUsers Manual2018-04-23PDF 894.3 KB
Regulatory InsertUsers Manual2018-04-23PDF 224.3 KB
T811 User Manual Metadata onlyUsers Manual2018-04-23PDF 894.3 KB
User Manual Regulatory StatementUsers Manual2018-04-23PDF 337.1 KB
Internal PhotosInternal Photos2018-08-15PDF 365.9 KB
Internal PhotoInternal Photos2018-04-23PDF 365.9 KB
External PhotosExternal Photos2018-08-15PDF 206.3 KB
External PhotoExternal Photos2018-04-23PDF 206.3 KB
Product LabelID Label/Location Info2017-10-25PDF 265.7 KB
Test Setup PhotosTest Setup Photos2018-08-15PDF 255.4 KB
Test Setup PhotoTest Setup Photos2018-04-23PDF 255.4 KB
T811-CM Installation AddendumTest Setup Photos2017-10-25PDF 423.5 KB
DFS Test Report Metadata onlyTest Report2018-02-16PDF 5.6 MB
DFS Test reportTest Report2018-02-16PDF 4.6 MB
KDB 789033 Section H RequirementTest Report2018-02-16PDF 178.4 KB
NII RF Test report part -1Test Report2018-02-16PDF 4.9 MB
NII RF Test report part -2Test Report2018-02-16PDF 5.2 MB
NII RF Test report part -3Test Report2018-02-16PDF 5.1 MB
NII RF Test report part -4Test Report2018-02-16PDF 1.2 MB
NII RF report part 1 Metadata onlyTest Report2018-02-16PDF 4.9 MB
NII RF report part 2 Metadata onlyTest Report2018-02-16PDF 5.2 MB
NII RF report part 3 Metadata onlyTest Report2018-02-16PDF 5.2 MB
NII RF report part 4 Metadata onlyTest Report2018-02-16PDF 4.3 MB
NII Test Report Part 1 Metadata onlyTest Report2018-02-16PDF 5.5 MB
NII Test Report Part 2 Metadata onlyTest Report2018-02-16PDF 5.5 MB
NII Test Report Part 3 Metadata onlyTest Report2018-02-16PDF 5.5 MB
NII Test Report Part 4 Metadata onlyTest Report2018-02-16PDF 4 MB
T811 elevation plane radiation patternTest Report2018-02-16PDF 149 KB
DTS Test Report Part 1Test Report2017-10-25PDF 4.9 MB
DTS Test Report Part 2Test Report2017-10-25PDF 4.7 MB
DTS Test Report part 1Test Report2017-10-25PDF 4.9 MB
DTS Test Report part 2Test Report2017-10-25PDF 4.9 MB
DTS Test Report part 3Test Report2017-10-25PDF 5 MB
DTS Test Report part 4Test Report2017-10-25PDF 380.6 KB
NII Test Report Part 1Test Report2017-10-25PDF 5 MB
NII Test Report Part 2Test Report2017-10-25PDF 5 MB
NII Test Report Part 3Test Report2017-10-25PDF 4.9 MB
NII Test Report Part 4Test Report2017-10-25PDF 4.5 MB
NII Test report 1Test Report2017-10-25PDF 4.9 MB
NII Test report 2Test Report2017-10-25PDF 5.2 MB
NII Test report 3Test Report2017-10-25PDF 1.7 MB
T811 Installation AddendumTest Report2017-10-25PDF 423.5 KB
DFS Channel AttestationAttestation Statements2017-10-25PDF 198.3 KB
Professional Installation AttestationAttestation Statements2017-10-25PDF 175.5 KB
Class II Permissive Change Request LetterCover Letter(s)2018-02-16PDF 189.4 KB
Confidentiality Request LetterCover Letter(s)2018-02-16PDF 191.1 KB
Product Certification Representative Auth LetterCover Letter(s)2018-02-16PDF 187.8 KB
Confidentiality Request LetterCover Letter(s)2017-10-25PDF 193.4 KB
DoCCover Letter(s)2017-10-25PDF 113.9 KB
Representative Auth LetterCover Letter(s)2017-10-25PDF 187.8 KB
WIFI Channel Declaration LetterCover Letter(s)2017-10-25PDF 230.3 KB
MPE CalculationRF Exposure Info2018-02-16PDF 33.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 301.8 KB
T811-CM Schematics Metadata onlySchematicsPDF 1.5 MB
Software Security Requirement Metadata onlyOperational DescriptionPDF 99.1 KB
T811-CM Operation Description Metadata onlyOperational DescriptionPDF 176.5 KB

Application Information

Application IDGs7p1/lOtxZFkAFBPjXgsA==
Final Action Date2018-02-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelT811CM
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionT811-CM Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/15/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC to add DFS bands via SW. Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device complies with all 15.407(1)(i) requirements. When the device is installed outdoors at an angle to the horizon, power must be reduced to insure the energy radiated above 30 degrees from the horizon remains under 21dBm EIRP. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 MHz and 80+80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Gs7p1/lOtxZFkAFBPjXgsA==2018-02-16Class II permissive change or modification of presently authorized equipment
nRjA1W+XqnUZxRpYVeLnrg==2017-10-25Original Equipment
ORzx7oi/sxyJ+xo2a54FNQ==2017-10-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.652000015CCC, MO
5180-5240 MHz0.3915ECC, MO
5180-5240 MHz0.3915E38, CC, MO
5260-5320 MHz0.13815ECC, MO, ND
5500-5700 MHz0.14315ECC, MO, ND
5745-5825 MHz0.5915E38, CC, MO
5745-5825 MHz0.5915ECC, MO

Grants

TCB Grant - Application ORzx7oi/sxyJ+xo2a54FNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/25/2017

Application Dated: 10/25/2017
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: T811-CM Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.39  
38 CC MO 15E 5745.0  -  5825.0 0.59  

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device complies with all 15.407(1)(i) requirements. When the device is installed outdoors at an angle to the horizon, power must be reduced to insure the energy radiated above 30 degrees from the horizon remains under 21dBm EIRP. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 MHz and 80+80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ORzx7oi/sxyJ+xo2a54FNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 10/25/2017

Application Dated: 10/25/2017
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: T811-CM Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.39  
38 CC MO 15E 5745.0  -  5825.0 0.59  

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device complies with all 15.407(1)(i) requirements. When the device is installed outdoors at an angle to the horizon, power must be reduced to insure the energy radiated above 30 degrees from the horizon remains under 21dBm EIRP. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 MHz and 80+80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application nRjA1W+XqnUZxRpYVeLnrg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/25/2017

Application Dated: 10/25/2017
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: T811-CM Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.652  

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nRjA1W+XqnUZxRpYVeLnrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 10/25/2017

Application Dated: 10/25/2017
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: T811-CM Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.652  

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Gs7p1/lOtxZFkAFBPjXgsA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2018

Application Dated: 01/15/2018
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: T811-CM Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.39  
CC MO ND 15E 5260.0  -  5320.0 0.138  
CC MO ND 15E 5500.0  -  5700.0 0.143  
CC MO 15E 5745.0  -  5825.0 0.59  

C2PC to add DFS bands via SW.

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device complies with all 15.407(1)(i) requirements. When the device is installed outdoors at an angle to the horizon, power must be reduced to insure the energy radiated above 30 degrees from the horizon remains under 21dBm EIRP. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 MHz and 80+80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Gs7p1/lOtxZFkAFBPjXgsA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 02/16/2018

Application Dated: 01/15/2018
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GT811CM
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: T811-CM Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.39  
CC MO ND 15E 5260.0  -  5320.0 0.138  
CC MO ND 15E 5500.0  -  5700.0 0.143  
CC MO 15E 5745.0  -  5825.0 0.59  

C2PC to add DFS bands via SW.

Power listed is the maximum combined conducted output power. Device is an Outdoor Access Point. Device complies with all 15.407(1)(i) requirements. When the device is installed outdoors at an angle to the horizon, power must be reduced to insure the energy radiated above 30 degrees from the horizon remains under 21dBm EIRP. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 MHz and 80+80 MHz bandwidth mode. The AP supports beamforming mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: