FCC ID S9GXO1

IEEE 802.11ac Access Point

by Ruckus Wireless, Inc.

Grantee Code: S9G   Product Code: XO1
Latest application date: 2016-06-07

FCC ID Device Details

FCC IDS9GXO1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeS9G
Product CodeXO1
Applicant BusinessRuckus Wireless, Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassIEEE 802.11ac Access Point
Test FirmBay Area Compliance Laboratories Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-07
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: S9GT300 Grant Date: 11/13/20142014-12-09
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: S9GT300 Grant Date: 11/13/20142014-12-09

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2014-12-09PDF 872.1 KB
FCC ID LabelID Label/Location Info2014-12-09PDF 419 KB
Antenna ListOperational Description2014-12-09PDF 51 KB
DFS Report Metadata onlyTest Report2016-06-07PDF 2.7 MB
DFS Report RevTest Report2016-06-07PDF 3 MB
Attestation LetterAttestation Statements2016-06-07PDF 260.5 KB
C2PC LetterCover Letter(s)2016-06-07PDF 122.6 KB
DFS Expediated Review Request Letter Metadata onlyCover Letter(s)2016-06-07PDF 260.4 KB
DFS Expediated Review Request Ltr Rev Metadata onlyCover Letter(s)2016-06-07PDF 163.5 KB
DFS Expediated Review Request Ltr Rev ACover Letter(s)2016-06-07PDF 164.2 KB
Change in ID Request LetterCover Letter(s)2014-12-09PDF 245.8 KB
PAG Approved Metadata onlyOperational DescriptionPDF 57.7 KB
Software Security Description Metadata onlyOperational DescriptionPDF 280.9 KB

Application Information

Application IDwAjT1ySKoV0DEky5aakd5g==
Final Action Date2016-06-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013389887
ModelXO1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE 802.11ac Access Point
Responsible PartyIvaylo Tankov, Principal Wireless Compliance Engineering, certifications@commscope.com , 1-408-636-4361
Test FirmLisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change of updating UNII bands under new rules documented in this filing. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
wAjT1ySKoV0DEky5aakd5g==2016-06-07Class II permissive change or modification of presently authorized equipment
VRL87p2ikzyuHgBlNTnuKg==2014-12-09Change in identification of presently authorized equipment. Original FCC ID: S9GT300 Grant Date: 11/13/2014
6bhujTQTNTxFOidiSMkd1Q==2014-12-09Change in identification of presently authorized equipment. Original FCC ID: S9GT300 Grant Date: 11/13/2014

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.23815CCC, MO
2422-2452 MHz0.23315CCC, MO
5180-5240 MHz0.04915ECC, MO
5180-5240 MHz0.28415E38, CC, MO
5260-5320 MHz0.22615ECC, MO, ND
5260-5320 MHz0.22615E38, CC, MO, ND
5500-5580 MHz0.22315ECC, MO, ND
5500-5700 MHz0.22315E38, CC, MO, ND
5660-5700 MHz0.21715ECC, MO, ND
5745-5825 MHz0.31615CCC, MO
5745-5825 MHz0.31615E38, CC, MO
5755-5795 MHz0.23715CCC, MO
5775 MHz0.22215CCC, MO

Grants

TCB Grant - Application wAjT1ySKoV0DEky5aakd5g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/07/2016

Application Dated: 05/27/2016
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.284  
38 CC MO ND 15E 5260.0  -  5320.0 0.226  
38 CC MO ND 15E 5500.0  -  5700.0 0.223  
38 CC MO 15E 5745.0  -  5825.0 0.316  

Class II Permissive Change of updating UNII bands under new rules documented in this filing. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application wAjT1ySKoV0DEky5aakd5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 06/07/2016

Application Dated: 05/27/2016
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.284  
38 CC MO ND 15E 5260.0  -  5320.0 0.226  
38 CC MO ND 15E 5500.0  -  5700.0 0.223  
38 CC MO 15E 5745.0  -  5825.0 0.316  

Class II Permissive Change of updating UNII bands under new rules documented in this filing. Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application VRL87p2ikzyuHgBlNTnuKg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 12/09/2014

Application Dated: 12/09/2014
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.238  
CC MO 15C 2422.0  -  2452.0 0.233  
CC MO 15C 5745.0  -  5825.0 0.316  
CC MO 15C 5755.0  -  5795.0 0.237  
CC MO 15C 5775.0  -  5775.0 0.222  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VRL87p2ikzyuHgBlNTnuKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 12/09/2014

Application Dated: 12/09/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.238  
CC MO 15C 2422.0  -  2452.0 0.233  
CC MO 15C 5745.0  -  5825.0 0.316  
CC MO 15C 5755.0  -  5795.0 0.237  
CC MO 15C 5775.0  -  5775.0 0.222  

Output power listed is conducted. Device is an access point operating with specific antenna in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6bhujTQTNTxFOidiSMkd1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 12/09/2014

Application Dated: 12/03/2014
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 ac Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO ND 15E 5260.0  -  5320.0 0.226  
CC MO ND 15E 5500.0  -  5580.0 0.223  
CC MO ND 15E 5660.0  -  5700.0 0.217  

Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 6bhujTQTNTxFOidiSMkd1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 12/09/2014

Application Dated: 12/03/2014
 
Attention: Ivaylo Tankov , Principal Wireless Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  S9GXO1
Name of Grantee:  Ruckus Wireless, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 ac Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO ND 15E 5260.0  -  5320.0 0.226  
CC MO ND 15E 5500.0  -  5580.0 0.223  
CC MO ND 15E 5660.0  -  5700.0 0.217  

Output power listed is conducted. Device is an access point operating with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: