FCC ID SA3-AGN1012MP0200
802.11 a/b/g Mini-PCI MISO Type 3b Module
by Airgo Networks Inc.
Grantee Code: SA3 Product Code: AGN1012MP0200
Latest application date: 2005-03-15
FCC ID Device Details
| FCC ID | SA3-AGN1012MP0200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SA3 |
| Product Code | AGN1012MP0200 |
| Applicant Business | Airgo Networks Inc. 🇺🇸 |
| Related Domains |  airgonetworks.com |
| Equipment Class | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2005-03-15 |
| 2412-2462 MHz | Original Equipment | 2005-03-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2005-03-15 | PDF 434.4 KB |
| External Photos | External Photos | 2005-03-15 | PDF 434.4 KB |
| FCC ID Label | ID Label/Location Info | 2005-03-15 | PDF 141 KB |
| Setup Photos | Test Setup Photos | 2005-03-15 | PDF 231.5 KB |
| Test Plot | Test Report | 2005-03-15 | PDF 193.7 KB |
| Test Plot | Test Report | 2005-03-15 | PDF 1 MB |
| Test Report | Test Report | 2005-03-15 | PDF 1.6 MB |
| Test Report | Test Report | 2005-03-15 | PDF 938.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2005-03-15 | PDF 66.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2005-03-15 | PDF 66.1 KB |
| Request for Confidentiality | Cover Letter(s) | 2005-03-15 | PDF 81.3 KB |
| TCB Q and A | Cover Letter(s) | 2005-03-15 | PDF 10.5 KB |
| TCB Q and A | Cover Letter(s) | 2005-03-15 | PDF 10.2 KB |
| Antenna Information | Parts List/Tune Up Info | 2005-03-15 | PDF 208.6 KB |
| MPE | RF Exposure Info | 2005-03-15 | PDF 48.1 KB |
| User Manual Metadata only | Users Manual | PDF 716.4 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 95.8 KB | |
| Schematics Metadata only | Schematics | PDF 313.7 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 453.5 KB |
Application Information
| Application ID | srhkS/omQxSzHvl5ejTsiA== |
|---|---|
| Final Action Date | 2005-03-15 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011165933 |
| Model | AGN1012MP0200 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Responsible Party | John Quigley, VP Engineering, jquigley@airgonetworks.com , 650 475 1991 |
| Agent | Tom Tom Tom, T.N. Conkenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operation in 5.15-5.25 GHz band is restricted to indoor use only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| srhkS/omQxSzHvl5ejTsiA== | 2005-03-15 | Original Equipment |
| 41neqeLpVpLEDo94Q3JWrg== | 2005-03-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application srhkS/omQxSzHvl5ejTsiA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/15/2005 Application Dated: 03/15/2005 |
| Airgo Networks Inc. |
| 900 Arastradero Road |
| Palo Alto, CA 94304 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN1012MP0200 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0277 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0942 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operation in 5.15-5.25 GHz band is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application srhkS/omQxSzHvl5ejTsiA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airgo Networks Inc. 900 Arastradero Road Palo Alto, CA 94304 United States |
Date of Grant: 03/15/2005 Application Dated: 03/15/2005 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN1012MP0200 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0277 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0942 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operation in 5.15-5.25 GHz band is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/15/2005 Application Dated: 03/15/2005 |
| Airgo Networks Inc. |
| 900 Arastradero Road |
| Palo Alto, CA 94304 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN1012MP0200 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.863 | ||
| CC | 15C | 5745.0 - 5805.0 | 0.4 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 41neqeLpVpLEDo94Q3JWrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airgo Networks Inc. 900 Arastradero Road Palo Alto, CA 94304 United States |
Date of Grant: 03/15/2005 Application Dated: 03/15/2005 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN1012MP0200 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Mini-PCI MISO Type 3b Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.863 | ||
| CC | 15C | 5745.0 - 5805.0 | 0.4 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |