FCC ID SA3-AGN3023MX0100
Gen 3 2x3 APx Mini-PCI Card
by Airgo Networks Inc.
Grantee Code: SA3 Product Code: AGN3023MX0100
Latest application date: 2005-11-17
FCC ID Device Details
| FCC ID | SA3-AGN3023MX0100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SA3 |
| Product Code | AGN3023MX0100 |
| Applicant Business | Airgo Networks Inc. 🇺🇸 |
| Related Domains |  airgonetworks.com |
| Equipment Class | Gen 3 2x3 APx Mini-PCI Card |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-11-17 |
| 2412-2462 MHz | Original Equipment | 2005-10-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2005-12-08 | PDF 973.9 KB |
| External Photos | External Photos | 2005-12-08 | PDF 985.2 KB |
| External Photos | External Photos | 2005-11-17 | PDF 416 KB |
| FCC ID Label | ID Label/Location Info | 2005-10-24 | PDF 159.5 KB |
| Setup Photos | Test Setup Photos | 2005-12-08 | PDF 311.9 KB |
| Test Report | Test Report | 2005-11-17 | PDF 1.7 MB |
| Test Report | Test Report | 2005-10-24 | PDF 3 MB |
| Authorization Letter | Cover Letter(s) | 2005-11-17 | PDF 74.7 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2005-11-17 | PDF 105.5 KB |
| Request for Confidentiality | Cover Letter(s) | 2005-11-17 | PDF 82.8 KB |
| TCB Q and A | Cover Letter(s) | 2005-11-17 | PDF 18.2 KB |
| Airgo Authorization Letter | Cover Letter(s) | 2005-10-24 | PDF 74.7 KB |
| Channel Limits | Cover Letter(s) | 2005-10-24 | PDF 77.5 KB |
| Request for Confidentiality Long Term Metadata only | Cover Letter(s) | 2005-10-24 | PDF 83.1 KB |
| Request for Confidentiality Short Term | Cover Letter(s) | 2005-10-24 | PDF 83.1 KB |
| TCB Q and A | Cover Letter(s) | 2005-10-24 | PDF 11.1 KB |
| TNC Authorization Letter | Cover Letter(s) | 2005-10-24 | PDF 91.9 KB |
| Updated Request for Confidentiality Letter | Cover Letter(s) | 2005-10-24 | PDF 66.8 KB |
| module request letter | Cover Letter(s) | 2005-10-24 | PDF 71.6 KB |
| Antenna Information | Parts List/Tune Up Info | 2005-10-24 | PDF 1.1 MB |
| User Manual Metadata only | Users Manual | PDF 588.4 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 96.3 KB | |
| Schematics Metadata only | Schematics | PDF 232.9 KB | |
| Schematics Metadata only | Schematics | PDF 232.7 KB | |
| APx Class 2 FCC Amendment Metadata only | Operational Description | PDF 53.3 KB | |
| MIMO Regulatory Considerations Metadata only | Operational Description | PDF 574.5 KB | |
| Theory of Operation AGN3023M Metadata only | Operational Description | PDF 292 KB | |
| theory APx REV Metadata only | Operational Description | PDF 135.8 KB |
Application Information
| Application ID | rfRp+/HMAjNLcZQ5ox3XtA== |
|---|---|
| Final Action Date | 2005-11-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011165933 |
| Model | AGN3023MX0100 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Gen 3 2x3 APx Mini-PCI Card |
| Responsible Party | John Quigley, VP Engineering, jquigley@airgonetworks.com , 650 475 1991 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccemc.com  , 408-463-0885 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Modular Approval for Mobile RF Exposure conditions. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a Mini-PCI card operating in a 2x3 APx Spatial Multiplexing MIMO configuration as described in this filing. The module is approved for OEM Installation as long as the antennas listed in this filing are used. Approval is limited to OEM installation only, to include compliance with 15.204. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical Exclusion Requirements of FCC 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna and transmitter installation instructions and operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rfRp+/HMAjNLcZQ5ox3XtA== | 2005-11-17 | Class II permissive change or modification of presently authorized equipment |
| XisoFE4F41CIMscCOfqPUw== | 2005-10-24 | Original Equipment |
Grants
TCB Grant - Application XisoFE4F41CIMscCOfqPUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/24/2005 Application Dated: 10/24/2005 |
| Airgo Networks Inc. |
| 900 Arastradero Road |
| Palo Alto, CA 94304 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN3023MX0100 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gen 3 2x3 APx Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.205 |
| Modular Approval for Mobile RF Exposure conditions. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a Mini-PCI card operating in a 2x3 APx Spatial Multiplexing MIMO configuration as described in this filing. The module is approved for OEM Installation as long as the antennas listed in this filing are used. Approval is limited to OEM installation only, to include compliance with 15.204. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical Exclusion Requirements of FCC 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna and transmitter installation instructions and operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XisoFE4F41CIMscCOfqPUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airgo Networks Inc. 900 Arastradero Road Palo Alto, CA 94304 United States |
Date of Grant: 10/24/2005 Application Dated: 10/24/2005 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN3023MX0100 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gen 3 2x3 APx Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.205 |
| Modular Approval for Mobile RF Exposure conditions. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a Mini-PCI card operating in a 2x3 APx Spatial Multiplexing MIMO configuration as described in this filing. The module is approved for OEM Installation as long as the antennas listed in this filing are used. Approval is limited to OEM installation only, to include compliance with 15.204. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical Exclusion Requirements of FCC 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna and transmitter installation instructions and operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2005 Application Dated: 11/17/2005 |
| Airgo Networks Inc. |
| 900 Arastradero Road |
| Palo Alto, CA 94304 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN3023MX0100 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gen 3 2x3 APx Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.205 |
| Class II Permissive Change. Modular Approval for Mobile RF Exposure conditions. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a Mini-PCI card operating in a 2x3 APx Spatial Multiplexing MIMO configuration as described in this filing. The module is approved for OEM Installation as long as the antennas listed in this filing are used. Approval is limited to OEM installation only, to include compliance with 15.204. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical Exclusion Requirements of FCC 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna and transmitter installation instructions and operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rfRp+/HMAjNLcZQ5ox3XtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airgo Networks Inc. 900 Arastradero Road Palo Alto, CA 94304 United States |
Date of Grant: 11/17/2005 Application Dated: 11/17/2005 |
| Attention: John Quigley , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SA3-AGN3023MX0100 |
| Name of Grantee: | Airgo Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gen 3 2x3 APx Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.205 |
| Class II Permissive Change. Modular Approval for Mobile RF Exposure conditions. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a Mini-PCI card operating in a 2x3 APx Spatial Multiplexing MIMO configuration as described in this filing. The module is approved for OEM Installation as long as the antennas listed in this filing are used. Approval is limited to OEM installation only, to include compliance with 15.204. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical Exclusion Requirements of FCC 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna and transmitter installation instructions and operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |