FCC ID SAMRWIRL54BR1
High Rate Wireless Bridge
by RapidWave Inc.
Grantee Code: SAM Product Code: RWIRL54BR1
Latest application date: 2005-03-30
FCC ID Device Details
| FCC ID | SAMRWIRL54BR1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SAM |
| Product Code | RWIRL54BR1 |
| Applicant Business | RapidWave Inc. 🇺🇸 |
| Related Domains |  rapidwaveinc.com |
| Equipment Class | High Rate Wireless Bridge |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2005-03-30 |
| 5745-5825 MHz | Original Equipment | 2004-06-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Base Unit User Manual | Users Manual | 2005-03-30 | PDF 1.1 MB |
| CPE User Manual | Users Manual | 2005-03-30 | PDF 483.1 KB |
| User Manual updated page | Users Manual | 2005-03-30 | PDF 69.3 KB |
| User Manual | Users Manual | 2004-06-24 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2005-03-30 | PDF 236.8 KB |
| Internal Photos | Internal Photos | 2004-06-24 | PDF 2.2 MB |
| External Photos | External Photos | 2004-06-24 | PDF 2.7 MB |
| FCC ID Label | ID Label/Location Info | 2004-06-24 | PDF 173.9 KB |
| Technical Description | Operational Description | 2005-03-30 | PDF 265.1 KB |
| Test Setup Photos | Test Setup Photos | 2005-03-30 | PDF 616 KB |
| Setup Photos | Test Setup Photos | 2004-06-24 | PDF 464.1 KB |
| Test Report | Test Report | 2005-03-30 | PDF 2.1 MB |
| Test Report | Test Report | 2004-06-24 | PDF 1.3 MB |
| Agency Authorization letter | Cover Letter(s) | 2005-03-30 | PDF 106.3 KB |
| Class II permissive change letter | Cover Letter(s) | 2005-03-30 | PDF 113.3 KB |
| TCB Q and A | Cover Letter(s) | 2005-03-30 | PDF 28.4 KB |
| Agent Authorization Letter | Cover Letter(s) | 2004-06-24 | PDF 1.2 MB |
| Request for Confidentiality | Cover Letter(s) | 2004-06-24 | PDF 74.2 KB |
| TCB Q and A | Cover Letter(s) | 2004-06-24 | PDF 6.3 KB |
| MPE Estimate | RF Exposure Info | 2005-03-30 | PDF 49.3 KB |
| MT 2004 p2p antenna specification | Parts List/Tune Up Info | 2005-03-30 | PDF 104.4 KB |
| P2MP 60 degree sector specification | Parts List/Tune Up Info | 2005-03-30 | PDF 40.3 KB |
| P2MP 90 degree section specification | Parts List/Tune Up Info | 2005-03-30 | PDF 53.6 KB |
| sector P2MP antennas specification | Parts List/Tune Up Info | 2005-03-30 | PDF 216.5 KB |
| Antenna MT | Parts List/Tune Up Info | 2004-06-24 | PDF 106.6 KB |
| Antenna RD | Parts List/Tune Up Info | 2004-06-24 | PDF 106 KB |
| Block Diagram RL54 Metadata only | Block Diagram | PDF 71.2 KB | |
| Block Diagram Radio Metadata only | Block Diagram | PDF 1.9 MB | |
| Schematics Metadata only | Schematics | PDF 310.5 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 1.9 MB |
Application Information
| Application ID | Ps1ad9L5pqKktATDP7Ed+w== |
|---|---|
| Final Action Date | 2005-03-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008555302 |
| Model | RWIRL54BR1 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | High Rate Wireless Bridge |
| Responsible Party | Bernard R Picot, CEO, bpicot@rapidwaveinc.com , (408) 363-5984 |
| Agent | Tom Tom Tom, T.N. Cokenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | In this Class II permissive change filing, six sector antennas for point-to-multiple operation and one panel antenna for point-to-point operation are included in this filing. Output power listed is conducted. Professional installation is required. Only those point-to-point antennas and point-to-multipoint antennas as documented under this FCC ID number can be used. The point-to-point antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meter from all persons. The point-to-multipoint antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Ps1ad9L5pqKktATDP7Ed+w== | 2005-03-30 | Class II permissive change or modification of presently authorized equipment |
| MjMvAFCeI2RAeQjjk4cNwg== | 2004-06-24 | Original Equipment |
Grants
TCB Grant - Application Ps1ad9L5pqKktATDP7Ed+w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/30/2005 Application Dated: 03/30/2005 |
| RapidWave Inc. |
| 6296A San Ignacio Avenue |
| San Jose, CA 95119 |
| Attention: Bernard Picot , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SAMRWIRL54BR1 |
| Name of Grantee: | RapidWave Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | High Rate Wireless Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 16 | 15C | 5745.0 - 5825.0 | 0.226 |
| In this Class II permissive change filing, six sector antennas for point-to-multiple operation and one panel antenna for point-to-point operation are included in this filing. Output power listed is conducted. Professional installation is required. Only those point-to-point antennas and point-to-multipoint antennas as documented under this FCC ID number can be used. The point-to-point antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meter from all persons. The point-to-multipoint antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
EAS Grant - Application Ps1ad9L5pqKktATDP7Ed+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RapidWave Inc. 6296A San Ignacio Avenue San Jose, CA 95119 United States |
Date of Grant: 03/30/2005 Application Dated: 03/30/2005 |
| Attention: Bernard Picot , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SAMRWIRL54BR1 |
| Name of Grantee: | RapidWave Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | High Rate Wireless Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 16 | 15C | 5745.0 - 5825.0 | 0.226 |
| In this Class II permissive change filing, six sector antennas for point-to-multiple operation and one panel antenna for point-to-point operation are included in this filing. Output power listed is conducted. Professional installation is required. Only those point-to-point antennas and point-to-multipoint antennas as documented under this FCC ID number can be used. The point-to-point antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meter from all persons. The point-to-multipoint antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/24/2004 Application Dated: 06/24/2004 |
| RapidWave Inc. |
| 6296A San Ignacio Avenue |
| San Jose, CA 95119 |
| Attention: Bernard Picot , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SAMRWIRL54BR1 |
| Name of Grantee: | RapidWave Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | High Rate Point-to-Point Wireless Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 16 | 15C | 5745.0 - 5825.0 | 0.226 |
| Output power listed is conducted. Prodessional installation is required. Only 23 dBi and 26 dBi point-to-point antennas as documented in this filing can be used. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
EAS Grant - Application MjMvAFCeI2RAeQjjk4cNwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RapidWave Inc. 6296A San Ignacio Avenue San Jose, CA 95119 United States |
Date of Grant: 06/24/2004 Application Dated: 06/24/2004 |
| Attention: Bernard Picot , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SAMRWIRL54BR1 |
| Name of Grantee: | RapidWave Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | High Rate Point-to-Point Wireless Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 16 | 15C | 5745.0 - 5825.0 | 0.226 |
| Output power listed is conducted. Prodessional installation is required. Only 23 dBi and 26 dBi point-to-point antennas as documented in this filing can be used. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| Mail To: |