FCC ID SBRFL8310

OptiQwave-8310 STM-1 Digital Microwave System

by Fiber Logic Communications, Inc.

Grantee Code: SBR   Product Code: FL8310
Latest application date: 2006-02-14

FCC ID Device Details

FCC IDSBRFL8310
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSBR
Product CodeFL8310
Applicant BusinessFiber Logic Communications, Inc. 🇹🇼
Related Domains fiberlogic.com.tw
Equipment ClassOptiQwave-8310 STM-1 Digital Microwave System
Test FirmElectronics Testing Center, Taiwan

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5750-5825 MHzOriginal Equipment2006-02-14

Exhibits

DocumentTypeAvailableFile
Installation ManualUsers Manual2006-02-14PDF 1.6 MB
Users ManualUsers Manual2006-02-14PDF 1.2 MB
Internal Photos 1Internal Photos2006-02-14PDF 3.2 MB
Internal Photos 2Internal Photos2006-02-14PDF 3.7 MB
External PhotosExternal Photos2006-02-14PDF 837.3 KB
FCC ID LabelID Label/Location Info2006-02-14PDF 235.5 KB
Block DiagramBlock Diagram2006-02-14PDF 39.1 KB
Operational DescriptionOperational Description2006-02-14PDF 52.5 KB
Test Setup PhotosTest Setup Photos2006-02-14PDF 1.2 MB
Test ReportTest Report2006-02-14PDF 3.8 MB
Authorization LetterCover Letter(s)2006-02-14PDF 760.7 KB
Request for ConfidentialityCover Letter(s)2006-02-14PDF 397.9 KB
Antennan SpecificationParts List/Tune Up Info2006-02-14PDF 109.7 KB
RF ExposureRF Exposure Info2006-02-14PDF 70.2 KB
Schematics Baseband Metadata onlySchematicsPDF 718.4 KB
Schematics IF Metadata onlySchematicsPDF 52.1 KB
Schematics PA Metadata onlySchematicsPDF 236.5 KB
Schematics RX Metadata onlySchematicsPDF 494.2 KB
Schematics TX Metadata onlySchematicsPDF 477.2 KB

Application Information

Application IDgYRnSxGRL/sSFvriKxbdTw==
Final Action Date2006-02-14
Application PurposeOriginal Equipment
Applicant FRN0011201183
ModelFL8310
Frequency Range5750-5825 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionOptiQwave-8310 STM-1 Digital Microwave System
Responsible PartyChao Chin Chen, Hardware Engineer, ferischen@fiberlogic.com.tw , +886-3-563-8889
Test FirmWin-Po Tsai, Electronics Testing Center, Taiwan, winpo@etc.org.tw , 886-3-3276172
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. This device must be professionally installed and may only be used in point-to-point applications. The antennas used for this transmitter, as described in the filing, must be fix-mounted on permanent outdoor structures to provide a separation distance of 2 meters or more from all persons to satisfy MPE requirements, and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
gYRnSxGRL/sSFvriKxbdTw==2006-02-14Original Equipment

Equipment Authorization

FrequencyOutputRules
5750-5825 MHz0.050000015C

Grants

TCB Grant - Application gYRnSxGRL/sSFvriKxbdTw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/14/2006

Application Dated: 02/14/2006
Fiber Logic Communications, Inc.
5F-3, No. 9, Prosperity Road One, Science-Based In
Hsinchu, 300
Taiwan
 
Attention: Chao Chin Chen , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBRFL8310
Name of Grantee:  Fiber Logic Communications, Inc.
Equipment Class: Digital Transmission System
Notes: OptiQwave-8310 STM-1 Digital Microwave System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5750.0  -  5825.0 0.05  

Power Output listed is conducted. This device must be professionally installed and may only be used in point-to-point applications. The antennas used for this transmitter, as described in the filing, must be fix-mounted on permanent outdoor structures to provide a separation distance of 2 meters or more from all persons to satisfy MPE requirements, and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application gYRnSxGRL/sSFvriKxbdTw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fiber Logic Communications, Inc.
5F-3, No. 9, Prosperity Road One, Science-Based In
Hsinchu, 300
Taiwan
  Date of Grant: 02/14/2006

Application Dated: 02/14/2006
 
Attention: Chao Chin Chen , Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBRFL8310
Name of Grantee:  Fiber Logic Communications, Inc.
Equipment Class: Digital Transmission System
Notes: OptiQwave-8310 STM-1 Digital Microwave System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5750.0  -  5825.0 0.05  

Power Output listed is conducted. This device must be professionally installed and may only be used in point-to-point applications. The antennas used for this transmitter, as described in the filing, must be fix-mounted on permanent outdoor structures to provide a separation distance of 2 meters or more from all persons to satisfy MPE requirements, and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: