FCC ID SBVCR000
802.11b/g MiniPCI module
by Sonos, Inc.
Grantee Code: SBV Product Code: CR000
Latest application date: 2005-01-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-01-25 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: MCLT60H786 Grant Date: 03/22/2004 | 2004-10-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Safety FCC pages | Users Manual | 2005-01-25 | PDF 275.7 KB |
| User Manual | Users Manual | 2005-01-25 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2005-01-25 | PDF 1.8 MB |
| External Photos | External Photos | 2005-01-25 | PDF 1.8 MB |
| External Photos | External Photos | 2004-10-19 | PDF 1.2 MB |
| FCC ID Label | ID Label/Location Info | 2005-01-25 | PDF 612.5 KB |
| FCC ID | ID Label/Location Info | 2004-10-19 | PDF 640.7 KB |
| Setup Photos | Test Setup Photos | 2005-01-25 | PDF 136.2 KB |
| CR bandedge | Test Report | 2005-01-25 | PDF 271.6 KB |
| CR class 2 Above 1 GHz | Test Report | 2005-01-25 | PDF 396.5 KB |
| Test Report | Test Report | 2005-01-25 | PDF 956.4 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2005-01-25 | PDF 127.6 KB |
| TCB Q and A | Cover Letter(s) | 2005-01-25 | PDF 10.7 KB |
| Agent Authorization Letter | Cover Letter(s) | 2004-10-19 | PDF 135.5 KB |
| HON HAI Authorization Letter | Cover Letter(s) | 2004-10-19 | PDF 391.5 KB |
| Request Letter | Cover Letter(s) | 2004-10-19 | PDF 81 KB |
| Controlelr antenna | Parts List/Tune Up Info | 2005-01-25 | PDF 37.1 KB |
| MPE | RF Exposure Info | 2005-01-25 | PDF 30.7 KB |
| Sonos CR Antenna specification plot | Parts List/Tune Up Info | 2005-01-25 | PDF 109 KB |
Application Information
| Application ID | 3fKmSIQcuw9cv9luhXI80g== |
|---|---|
| Final Action Date | 2005-01-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011206661 |
| Model | CR000 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g MiniPCI module |
| Responsible Party | Mark Keefe, Compliance Engineer, mark.keefe@sonos.com  , (617) 225-2110 |
| Agent | Tom Tom Tom, T.N. Cokenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in the original filing and this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3fKmSIQcuw9cv9luhXI80g== | 2005-01-25 | Class II permissive change or modification of presently authorized equipment |
| p0PJ83d5WgiAVxLA2Rtwlg== | 2004-10-19 | Change in identification of presently authorized equipment. Original FCC ID: MCLT60H786 Grant Date: 03/22/2004 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2000000 | 15C |
Grants
TCB Grant - Application p0PJ83d5WgiAVxLA2Rtwlg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/19/2004 Application Dated: 10/19/2004 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVCR000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g MiniPCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in the original filing and this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application p0PJ83d5WgiAVxLA2Rtwlg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 10/19/2004 Application Dated: 10/19/2004 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVCR000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g MiniPCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in the original filing and this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/25/2005 Application Dated: 01/25/2005 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVCR000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g MiniPCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in the original filing and this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3fKmSIQcuw9cv9luhXI80g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 01/25/2005 Application Dated: 01/25/2005 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVCR000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g MiniPCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in the original filing and this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |