FCC ID SBVCR002

MINI PCI 802.11b/g Transceiver

by Sonos, Inc.

Grantee Code: SBV   Product Code: CR002
Latest application date: 2006-06-01

FCC ID Device Details

FCC IDSBVCR002
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSBV
Product CodeCR002
Applicant BusinessSonos, Inc. 🇺🇸
Related Domains sonos.com
Equipment ClassMINI PCI 802.11b/g Transceiver
Test FirmAudix Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-06-01
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-AR5BMB5 Grant Date: 10/13/20052006-05-26

Exhibits

DocumentTypeAvailableFile
Guide ZP100 CR100 Part 1Users Manual2006-06-01PDF 3.5 MB
Guide ZP100 CR100 Part 2Users Manual2006-06-01PDF 2.2 MB
Guide ZP80Users Manual2006-06-01PDF 1.1 MB
External Photos CR100External Photos2006-06-01PDF 26 KB
External Photos ZP100External Photos2006-06-01PDF 32.5 KB
External Photos ZP80External Photos2006-06-01PDF 33.3 KB
External PhotosExternal Photos2006-05-26PDF 324.5 KB
FCC label CR100ID Label/Location Info2006-06-01PDF 26 KB
FCC label ZP100ID Label/Location Info2006-06-01PDF 32.5 KB
FCC label ZP80ID Label/Location Info2006-06-01PDF 33.3 KB
ID LabelID Label/Location Info2006-05-26PDF 457.3 KB
Setup Photos CR100Test Setup Photos2006-06-01PDF 289.5 KB
Setup Photos ZP100Test Setup Photos2006-06-01PDF 372.3 KB
Setup Photos ZP80Test Setup Photos2006-06-01PDF 531.3 KB
Report CR100Test Report2006-06-01PDF 1 MB
Report ZP100Test Report2006-06-01PDF 1 MB
Report ZP80Test Report2006-06-01PDF 1.2 MB
Authorization LetterCover Letter(s)2006-06-01PDF 264.9 KB
Cover LetterCover Letter(s)2006-06-01PDF 102.2 KB
Atheros Authorization LetterCover Letter(s)2006-05-26PDF 53.7 KB
Cover LetterCover Letter(s)2006-05-26PDF 98.5 KB
SONOS Authorization LetterCover Letter(s)2006-05-26PDF 266.5 KB
Antenna CR100Parts List/Tune Up Info2006-06-01PDF 865.8 KB
Antenna ZP100Parts List/Tune Up Info2006-06-01PDF 1.4 MB
Antenna ZP80Parts List/Tune Up Info2006-06-01PDF 433.2 KB

Application Information

Application ID0W+3x6o+9nFh8jIcVFbsSg==
Final Action Date2006-06-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011206661
ModelCR002
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMINI PCI 802.11b/g Transceiver
Responsible PartyMark Keefe, Compliance Engineer, mark.keefe@sonos.com , (617) 225-2110
Test FirmLeon Liu, Audix Technology Corporation, allen_wang@audixtech.com , 886-2-2600-99301
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing to add new antennas along with three host devices. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
0W+3x6o+9nFh8jIcVFbsSg==2006-06-01Class II permissive change or modification of presently authorized equipment
m7BH4Ss+erFs+utEFkSLBg==2006-05-26Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BMB5 Grant Date: 10/13/2005

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.232000015C

Grants

TCB Grant - Application m7BH4Ss+erFs+utEFkSLBg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/26/2006

Application Dated: 05/26/2006
Sonos, Inc.
614 Chapala Street
Santa Barbara, CA 93101
 
Attention: Mark Keefe , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBVCR002
Name of Grantee:  Sonos, Inc.
Equipment Class: Digital Transmission System
Notes: MINI PCI 802.11b/g Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.232  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application m7BH4Ss+erFs+utEFkSLBg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sonos, Inc.
614 Chapala Street
Santa Barbara, CA 93101
United States
  Date of Grant: 05/26/2006

Application Dated: 05/26/2006
 
Attention: Mark Keefe , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBVCR002
Name of Grantee:  Sonos, Inc.
Equipment Class: Digital Transmission System
Notes: MINI PCI 802.11b/g Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.232  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application 0W+3x6o+9nFh8jIcVFbsSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/01/2006

Application Dated: 06/01/2006
Sonos, Inc.
614 Chapala Street
Santa Barbara, CA 93101
 
Attention: Mark Keefe , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBVCR002
Name of Grantee:  Sonos, Inc.
Equipment Class: Digital Transmission System
Notes: MINI PCI 802.11b/g Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.232  

Class II permissive change filing to add new antennas along with three host devices. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application 0W+3x6o+9nFh8jIcVFbsSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sonos, Inc.
614 Chapala Street
Santa Barbara, CA 93101
United States
  Date of Grant: 06/01/2006

Application Dated: 06/01/2006
 
Attention: Mark Keefe , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SBVCR002
Name of Grantee:  Sonos, Inc.
Equipment Class: Digital Transmission System
Notes: MINI PCI 802.11b/g Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.232  

Class II permissive change filing to add new antennas along with three host devices. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: