FCC ID SBVRM000
802.11g WLAN mini-PCI Adapter
by Sonos, Inc.
Grantee Code: SBV Product Code: RM000
Latest application date: 2006-11-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-28 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: NHPWLG1304 Grant Date: 07/25/2006 | 2006-08-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Guide ZP100 CR100 Part 1 | Users Manual | 2006-11-28 | PDF 3.5 MB |
| Guide ZP100 CR100 Part 2 | Users Manual | 2006-11-28 | PDF 2.2 MB |
| Guide ZP80 | Users Manual | 2006-11-28 | PDF 1.1 MB |
| Internal photos CR100 | Internal Photos | 2006-11-28 | PDF 633 KB |
| Internal photos ZP100 | Internal Photos | 2006-11-28 | PDF 411.5 KB |
| Internal photos ZP80 | Internal Photos | 2006-11-28 | PDF 312 KB |
| External photos CR100 | External Photos | 2006-11-28 | PDF 518 KB |
| External photos ZP100 | External Photos | 2006-11-28 | PDF 445.1 KB |
| External photos ZP80 | External Photos | 2006-11-28 | PDF 269.8 KB |
| External Photos | External Photos | 2006-08-30 | PDF 76.9 KB |
| FCC ID Label | ID Label/Location Info | 2006-11-28 | PDF 65.4 KB |
| ID Label Location Info | ID Label/Location Info | 2006-08-30 | PDF 40.1 KB |
| Setup CR100 | Test Setup Photos | 2006-11-28 | PDF 73.6 KB |
| Setup ZP100 | Test Setup Photos | 2006-11-28 | PDF 83.2 KB |
| Setup ZP80 | Test Setup Photos | 2006-11-28 | PDF 83 KB |
| Report CR100Cameo | Test Report | 2006-11-28 | PDF 628.4 KB |
| Report ZP100Cameo | Test Report | 2006-11-28 | PDF 456.6 KB |
| Report ZP80 | Test Report | 2006-11-28 | PDF 459.3 KB |
| SonosCamMPE | Test Report | 2006-11-28 | PDF 25.7 KB |
| Authorization Letter | Cover Letter(s) | 2006-11-28 | PDF 267.9 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2006-11-28 | PDF 102.2 KB |
| Agency letter | Cover Letter(s) | 2006-08-30 | PDF 267.9 KB |
| Application letter | Cover Letter(s) | 2006-08-30 | PDF 83.9 KB |
| Authrization letter | Cover Letter(s) | 2006-08-30 | PDF 17.1 KB |
Application Information
| Application ID | IpqttqDVvCJWEOVd59drfA== |
|---|---|
| Final Action Date | 2006-11-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011206661 |
| Model | RM000 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11g WLAN mini-PCI Adapter |
| Responsible Party | Mark Keefe, Compliance Engineer, mark.keefe@sonos.com  , (617) 225-2110 |
| Test Firm | Leon Liu, Audix Technology Corporation, allen_wang@audixtech.com  , 886-2-2600-99301 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| IpqttqDVvCJWEOVd59drfA== | 2006-11-28 | Class II permissive change or modification of presently authorized equipment |
| ncKDQaLAZk67b7guKeW+6A== | 2006-08-30 | Change in identification of presently authorized equipment. Original FCC ID: NHPWLG1304 Grant Date: 07/25/2006 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0600000 | 15C |
Grants
TCB Grant - Application ncKDQaLAZk67b7guKeW+6A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/30/2006 Application Dated: 08/30/2006 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVRM000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g WLAN mini-PCI Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application ncKDQaLAZk67b7guKeW+6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 08/30/2006 Application Dated: 08/30/2006 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVRM000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g WLAN mini-PCI Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/28/2006 Application Dated: 11/28/2006 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVRM000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g WLAN mini-PCI Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Class II permissive change filing. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application IpqttqDVvCJWEOVd59drfA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 11/28/2006 Application Dated: 11/28/2006 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVRM000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g WLAN mini-PCI Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Class II permissive change filing. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: |