FCC ID SBVZP000
Mini PCI Card
by Sonos, Inc.
Grantee Code: SBV Product Code: ZP000
Latest application date: 2005-01-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-01-25 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: E2XSWL-2700M Grant Date: 05/20/2004 | 2004-10-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2005-01-25 | PDF 2.5 MB |
| External Photos | External Photos | 2005-01-25 | PDF 445.6 KB |
| External Photos | External Photos | 2004-10-19 | PDF 1.2 MB |
| FCC ID Label | ID Label/Location Info | 2005-01-25 | PDF 681.8 KB |
| FCC ID | ID Label/Location Info | 2004-10-19 | PDF 699.2 KB |
| Setup Photos | Test Setup Photos | 2005-01-25 | PDF 807 KB |
| Test Report | Test Report | 2005-01-25 | PDF 1.3 MB |
| ZP Above 1 GHz report | Test Report | 2005-01-25 | PDF 397 KB |
| ZP bandedge | Test Report | 2005-01-25 | PDF 270.1 KB |
| Authorization Letter | Cover Letter(s) | 2005-01-25 | PDF 135.5 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2005-01-25 | PDF 127.8 KB |
| Agent Authorization Letter | Cover Letter(s) | 2004-10-19 | PDF 135.5 KB |
| Authorization Letter | Cover Letter(s) | 2004-10-19 | PDF 12.5 KB |
| Request Letter | Cover Letter(s) | 2004-10-19 | PDF 83.3 KB |
| Antenna Information | Parts List/Tune Up Info | 2005-01-25 | PDF 461.3 KB |
| MPE | RF Exposure Info | 2005-01-25 | PDF 30.8 KB |
Application Information
| Application ID | m/UOhb3ysDZ2QaolbQqa6w== |
|---|---|
| Final Action Date | 2005-01-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011206661 |
| Model | ZP000 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Mini PCI Card |
| Responsible Party | Mark Keefe, Compliance Engineer, mark.keefe@sonos.com  , (617) 225-2110 |
| Agent | Tom Tom Tom, T.N. Conkenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m/UOhb3ysDZ2QaolbQqa6w== | 2005-01-25 | Class II permissive change or modification of presently authorized equipment |
| kcO41atrgvkZ8WXr1YqlgA== | 2004-10-19 | Change in identification of presently authorized equipment. Original FCC ID: E2XSWL-2700M Grant Date: 05/20/2004 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0860000 | 15C |
Grants
TCB Grant - Application m/UOhb3ysDZ2QaolbQqa6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/25/2005 Application Dated: 01/25/2005 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVZP000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.086 |
| Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application m/UOhb3ysDZ2QaolbQqa6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 01/25/2005 Application Dated: 01/25/2005 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVZP000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.086 |
| Class II Permissive Change to restrict operation to 802.11(g) by firmware and use a new antenna in specific host as documented in this filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/19/2004 Application Dated: 10/19/2004 |
| Sonos, Inc. |
| 614 Chapala Street |
| Santa Barbara, CA 93101 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVZP000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.086 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application kcO41atrgvkZ8WXr1YqlgA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sonos, Inc. 614 Chapala Street Santa Barbara, CA 93101 United States |
Date of Grant: 10/19/2004 Application Dated: 10/19/2004 |
| Attention: Mark Keefe , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SBVZP000 |
| Name of Grantee: | Sonos, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.086 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |