FCC ID SCCNUR05WL2

Nordic ID UHF RFID Radio Module NUR-05WL2

by Nordic ID Oy

Grantee Code: SCC   Product Code: NUR05WL2
Latest application date: 2018-05-17

Device Images

FCC ID Device Details

FCC IDSCCNUR05WL2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSCC
Product CodeNUR05WL2
Applicant BusinessNordic ID Oy 🇫🇮
Related Domains nordicid.com
Equipment ClassNordic ID UHF RFID Radio Module NUR-05WL2
Test FirmSGS Fimko Oy

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2018-05-17
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2018-01-31
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2017-06-16
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2017-02-16
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2016-07-08
902.25-927.75 MHzOriginal Equipment2013-09-28

Exhibits

DocumentTypeAvailableFile
Host Device Safety Training LeafletUsers Manual2018-05-17PDF 111.5 KB
Host Device Safety and Regulation LeafletUsers Manual2018-05-17PDF 2.4 MB
DatasheetUsers Manual2018-01-31PDF 537.8 KB
Safety GuideUsers Manual2018-01-31PDF 64.6 KB
User ManualUsers Manual2018-01-31PDF 930.4 KB
User Manual GuideUsers Manual2018-01-31PDF 1.2 MB
Nordic ID Morphic CD RF safety training_FCCUsers Manual2017-06-16PDF 116.6 KB
Nordic ID Morphic_Quickguide_Multi-ling_V1009_webUsers Manual2017-06-16PDF 1.6 MB
Safety and regulations_V1014_webUsers Manual2017-06-16PDF 475.3 KB
Nordic ID Merlin_Quickguide_Multiling_V1006Users Manual2017-02-16PDF 2.3 MB
Implementation GuideUsers Manual2013-09-28PDF 936.2 KB
NordicID_Morphic_Internal Photos_revInternal Photos2017-06-16PDF 360.1 KB
Merlin CD 805-2A_2F Internal_External_Photos_1.1Internal Photos2017-02-16PDF 926.6 KB
Internal PhotosInternal Photos2013-09-28PDF 39.8 KB
Merlin 805-2C PhotosExternal Photos2018-05-17PDF 873.3 KB
RFID Antenna Distance IllustrationExternal Photos2018-05-17PDF 148.8 KB
WLAN BT Antenna Distance IllustrationExternal Photos2018-05-17PDF 153.5 KB
External PhotosExternal Photos2018-01-31PDF 528.1 KB
NordicID_Morphic_External_PhotosExternal Photos2017-06-16PDF 299.8 KB
Merlin CD 805-2A_2F Internal_External_PhotosExternal Photos2017-02-16PDF 818.4 KB
Merlin CD RFID antenna distance to hand grip area_1External Photos2017-02-16PDF 93.7 KB
Merlin CD WLAN_BT antenna distance to hand grip area_1External Photos2017-02-16PDF 100.8 KB
External PhotosExternal Photos2013-09-28PDF 56.5 KB
LabelID Label/Location Info2018-01-31PDF 28.2 KB
Label locationID Label/Location Info2016-07-08PDF 441.4 KB
Label LocationID Label/Location Info2013-09-28PDF 441.4 KB
Test setup photosTest Setup Photos2016-07-08PDF 472.4 KB
Test Setup PhotosTest Setup Photos2013-09-28PDF 139.9 KB
SAR test reportRF Exposure Info2016-07-08PDF 1.7 MB
Test ReportTest Report2016-07-08PDF 2.7 MB
Test ReportTest Report2013-09-28PDF 2 MB
C2PC Cover LetterCover Letter(s)2018-05-17PDF 65 KB
Confidentiality requestCover Letter(s)2018-01-31PDF 86.1 KB
Permissive Change LetterCover Letter(s)2018-01-31PDF 80 KB
FCC_cover_letter_for_NUR-05WL2_ACB_FCC-form-731_revCover Letter(s)2017-06-16PDF 256.1 KB
Morphic CD antenna distances to grip areaCover Letter(s)2017-06-16PDF 171.1 KB
NUR-05WL2_FCC_Req_for_ConfidentialityCover Letter(s)2017-06-16PDF 249.6 KB
Confidential_FCC Confidentiality request for NUR-05WL2Cover Letter(s)2017-02-16PDF 248.1 KB
FCC_cover_letter_for_NUR05WL2+SDCSSD40NBT_C2PC_RevCover Letter(s)2017-02-16PDF 220.8 KB
Cover LetterCover Letter(s)2016-07-08PDF 307.7 KB
Cover letterCover Letter(s)2016-07-08PDF 106.7 KB
Modular Approval LetterCover Letter(s)2013-09-28PDF 50 KB
Request for ConfidentialityCover Letter(s)2013-09-28PDF 30.9 KB
RF Exposure AnalysisRF Exposure Info2018-05-17PDF 195 KB
SAR ReportRF Exposure Info2018-01-31PDF 1.2 MB
Use casesRF Exposure Info2018-01-31PDF 1.1 MB
FCC_Statement of Human Exposure to Radiofrequency Electromagnetic Field MorphicRF Exposure Info2017-06-16PDF 1.2 MB
FCC_Statement of Human Exposure to Radiofrequency Electromagnetic Field Merlin CRF Exposure Info2017-02-16PDF 1.2 MB
MPE AssessmentRF Exposure Info2013-09-28PDF 251.5 KB
Confidential_NordicID_Merlin_Operational_Description Metadata onlyOperational DescriptionPDF 269.3 KB
Confidential_NordicID_Morphic CD_Operational_Description Metadata onlyOperational DescriptionPDF 309.1 KB
Operation Description Metadata onlyOperational DescriptionPDF 79.9 KB
RF Exposure KDB Metadata onlyOperational DescriptionPDF 152.9 KB

Application Information

Application IDG9Y3FobFo8bqRpjDy2Qhng==
Final Action Date2018-05-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010842532
ModelNUR05WL2
Frequency Range902.25-927.75 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionNordic ID UHF RFID Radio Module NUR-05WL2
Responsible PartyRauno Nikkil, Certification Specialist, info@nordicid.com , 358 2727 7700
Technical ContactToni Heijari, Nordic ID Oy, toni.heijari@nordicid.com , 35827277700
Non-Technical ContactMika Karttunen, Nordic ID Oy, mika.karttunen@nordicid.com , 35827277700
Test FirmJanne Nyman, SGS Fimko Oy, janne.nyman@sgs.eom , +358 9 696 361
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. Single Modular Approval. This devise is granted for use in mobile configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class 2 Permissive Change to allow installation into portable host Nordic ID Merlin UHF 805-2C; and co-location with FCC certified WLAN/BT module FCC ID: SCC-SDCSSD40NBT. The highest reported SAR value: 2.0 W/kg, extremity (hand).

Applications

Application IDDatePurpose
G9Y3FobFo8bqRpjDy2Qhng==2018-05-17Class II permissive change or modification of presently authorized equipment
5Na2yuNNrEThqJHdU0acmg==2018-01-31Class II permissive change or modification of presently authorized equipment
CzfRY4tDnUNhn1avcrO6fA==2017-06-16Class II permissive change or modification of presently authorized equipment
LSDsksM3PusYzJm1jWx9sA==2017-02-16Class II permissive change or modification of presently authorized equipment
dUmMbdOBIIbZyjYgCQSF/A==2016-07-08Class II permissive change or modification of presently authorized equipment
zuifyXPbB22IZqM02EqUcQ==2013-09-28Original Equipment

Equipment Authorization

FrequencyOutputRules
902.25-927.75 MHz0.388000015C

Grants

TCB Grant - Application zuifyXPbB22IZqM02EqUcQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/28/2013

Application Dated: 09/27/2013
Nordic ID Oy
Myllyojankatu 2A
Salo, 24100
Finland
 
Attention: Hannu Heino , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader Model NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


EAS Grant - Application zuifyXPbB22IZqM02EqUcQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Myllyojankatu 2A
Salo, 24100
Finland
  Date of Grant: 09/28/2013

Application Dated: 09/27/2013
 
Attention: Hannu Heino , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader Model NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



TCB Grant - Application LSDsksM3PusYzJm1jWx9sA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/16/2017

Application Dated: 02/16/2017
Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: Installation into a portable host and co-location with module FCC ID: SCC-SDCSSD40NBT.


EAS Grant - Application LSDsksM3PusYzJm1jWx9sA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
  Date of Grant: 02/16/2017

Application Dated: 02/16/2017
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: Installation into a portable host and co-location with module FCC ID: SCC-SDCSSD40NBT.



TCB Grant - Application G9Y3FobFo8bqRpjDy2Qhng==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/17/2018

Application Dated: 05/17/2018
Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Radio Module NUR-05WL2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Class 2 Permissive Change to allow installation into portable host Nordic ID Merlin UHF 805-2C; and co-location with FCC certified WLAN/BT module FCC ID: SCC-SDCSSD40NBT. The highest reported SAR value: 2.0 W/kg, extremity (hand).


EAS Grant - Application G9Y3FobFo8bqRpjDy2Qhng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
  Date of Grant: 05/17/2018

Application Dated: 05/17/2018
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Radio Module NUR-05WL2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Class 2 Permissive Change to allow installation into portable host Nordic ID Merlin UHF 805-2C; and co-location with FCC certified WLAN/BT module FCC ID: SCC-SDCSSD40NBT. The highest reported SAR value: 2.0 W/kg, extremity (hand).



TCB Grant - Application dUmMbdOBIIbZyjYgCQSF/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/08/2016

Application Dated: 07/08/2016
Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: For new antenna, installation into a portable host and co-location with module FCC ID: TWG-SDCSSD40NBT. Highest reported SAR values: Body Worn (TWG-SDCSSD40NBT): 0.29 W/kg; Extremity (SCCNUR05WL2): 1.66 W/kg.


EAS Grant - Application dUmMbdOBIIbZyjYgCQSF/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
  Date of Grant: 07/08/2016

Application Dated: 07/08/2016
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: For new antenna, installation into a portable host and co-location with module FCC ID: TWG-SDCSSD40NBT. Highest reported SAR values: Body Worn (TWG-SDCSSD40NBT): 0.29 W/kg; Extremity (SCCNUR05WL2): 1.66 W/kg.



TCB Grant - Application CzfRY4tDnUNhn1avcrO6fA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/16/2017

Application Dated: 06/15/2017
Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: Installation into a portable host and co-location with module FCC ID: SCC-SDCSSD40NBT


EAS Grant - Application CzfRY4tDnUNhn1avcrO6fA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
  Date of Grant: 06/16/2017

Application Dated: 06/15/2017
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Reader NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC: Installation into a portable host and co-location with module FCC ID: SCC-SDCSSD40NBT



TCB Grant - Application 5Na2yuNNrEThqJHdU0acmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/31/2018

Application Dated: 01/30/2018
Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Radio Module NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Class 2 Permissive Change: to allow installation into portable host Nordic ID EXA31, model 818-2A; and co-location with FCC certified BLE module FCC ID: SH6MDBT42Q. The highest reported SAR value: 0.8 W/kg, body worn.


EAS Grant - Application 5Na2yuNNrEThqJHdU0acmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nordic ID Oy
Joensuunkatu 7
Salo, 24100
Finland
  Date of Grant: 01/31/2018

Application Dated: 01/30/2018
 
Attention: Rauno Nikkil , Certification Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SCCNUR05WL2
Name of Grantee:  Nordic ID Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Nordic ID UHF RFID Radio Module NUR-05WL2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.388  

Power output listed is conducted. Single Modular Approval.

This devise is granted for use in mobile configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with this devise or similar antenna(s) with equal or lesser gain may be used with this transmitter operating conditions for satisfying RF exposure compliance. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Class 2 Permissive Change: to allow installation into portable host Nordic ID EXA31, model 818-2A; and co-location with FCC certified BLE module FCC ID: SH6MDBT42Q. The highest reported SAR value: 0.8 W/kg, body worn.



Mail To: