1. FCC ID
  2. SDB
  3. SDBAPXCVR01

FCC ID SDBAPXCVR01

AP/APX TRANSCEIVER MODULE

by Sensus Metering Systems Inc.

Grantee Code: SDB   Product Code: APXCVR01
Latest application date: 2008-06-24

FCC ID Device Details

FCC IDSDBAPXCVR01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSDB
Product CodeAPXCVR01
Applicant BusinessSensus Metering Systems Inc. 🇺🇸
Related Domains sensus.com
Equipment ClassAP/APX TRANSCEIVER MODULE
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
896-901 MHzClass II permissive change or modification of presently authorized equipment2008-06-24
896-901 MHzOriginal Equipment2007-09-04

Exhibits

DocumentTypeAvailableFile
EXTERNAL PHOTOSExternal Photos2007-09-04PDF 18.9 KB
LABEL INFORMATIONID Label/Location Info2007-09-04PDF 124.9 KB
TEST SETUP PHOTOSTest Setup Photos2008-06-24PDF 490.6 KB
TEST SETUP PHOTOSTest Setup Photos2007-09-04PDF 652.6 KB
TEST REPORTTest Report2008-06-24PDF 80.8 KB
TEST REPORTTest Report2007-09-04PDF 667 KB
AGENCY AGREEMENTCover Letter(s)2008-06-24PDF 215.8 KB
CONFIDENTIAL LETTERCover Letter(s)2008-06-24PDF 26.8 KB
COVER LETTERCover Letter(s)2008-06-24PDF 18 KB
CONFIDENTIALITY REQUESTCover Letter(s)2007-09-04PDF 32 KB
RF EXPOSURERF Exposure Info2007-09-04PDF 29.1 KB

Application Information

Application ID+J72IJy5CPK47CJ3tGNrkQ==
Final Action Date2008-06-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003180007
ModelAPXCVR01
Frequency Range896-901 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionAP/APX TRANSCEIVER MODULE
Responsible PartyRichard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular

Applications

Application IDDatePurpose
+J72IJy5CPK47CJ3tGNrkQ==2008-06-24Class II permissive change or modification of presently authorized equipment
7SwQPlhOkUu7sXVQhmOPDg==2007-09-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
896-901 MHz11ppm9K60F2D9
896-901 MHz11ppm4K80F2D9
901-902 MHz11ppm4K80F2D24D
928.85-929 MHz11ppm9K60F2D101C
928.85-929 MHz11ppm4K80F2D101C
930-931 MHz11ppm5K90F1D24D
932-932.5 MHz11ppm9K60F2D101C
932-932.5 MHz11ppm4K80F2D101C
935-940 MHz11ppm5K90F1D9
940-941 MHz11ppm5K90F1D24D
941-941.5 MHz11ppm5K90F1D101C
959.85-960 MHz11ppm5K90F1D101C

Grants

TCB Grant - Application 7SwQPlhOkUu7sXVQhmOPDg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 09/04/2007

Application Dated: 09/04/2007
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBAPXCVR01
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: AP/APX TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
90 896.0  -  901.0 1.0 1.0  PM 9K60F2D
90 896.0  -  901.0 1.0 1.0  PM 4K80F2D
90 935.0  -  940.0 1.0 1.0  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.0  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.0  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.0  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.0  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.0  PM 5K90F1D
101C 959.85  -  960.0 1.0 1.0  PM 5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application 7SwQPlhOkUu7sXVQhmOPDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 09/04/2007

Application Dated: 09/04/2007
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBAPXCVR01
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: AP/APX TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
90 896.0  -  901.0 1.0 1.0  PM 9K60F2D
90 896.0  -  901.0 1.0 1.0  PM 4K80F2D
90 935.0  -  940.0 1.0 1.0  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.0  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.0  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.0  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.0  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.0  PM 5K90F1D
101C 959.85  -  960.0 1.0 1.0  PM 5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



TCB Grant - Application +J72IJy5CPK47CJ3tGNrkQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 06/24/2008

Application Dated: 06/24/2008
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBAPXCVR01
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: AP/APX TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
90 896.0  -  901.0 1.0 1.0  PM 9K60F2D
90 896.0  -  901.0 1.0 1.0  PM 4K80F2D
90 935.0  -  940.0 1.0 1.0  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.0  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.0  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.0  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.0  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.0  PM 5K90F1D
101C 959.85  -  960.0 1.0 1.0  PM 5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).
Single Modular

EAS Grant - Application +J72IJy5CPK47CJ3tGNrkQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 06/24/2008

Application Dated: 06/24/2008
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBAPXCVR01
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: AP/APX TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
90 896.0  -  901.0 1.0 1.0  PM 9K60F2D
90 896.0  -  901.0 1.0 1.0  PM 4K80F2D
90 935.0  -  940.0 1.0 1.0  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.0  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.0  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.0  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.0  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.0  PM 5K90F1D
101C 959.85  -  960.0 1.0 1.0  PM 5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Single Modular



Mail To: