FCC ID SDBAPXCVRZIG01

AP/APX ZIGBEE TRANSCEIVER

by Sensus Metering Systems Inc.

Grantee Code: SDB Product Code: APXCVRZIG01

Latest application date: 2007-09-05

FCC ID Device Details

FCC ID	SDBAPXCVRZIG01
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	SDB
Product Code	APXCVRZIG01
Applicant Business	Sensus Metering Systems Inc. 🇺🇸
Related Domains	sensus.com
Equipment Class	AP/APX ZIGBEE TRANSCEIVER
Test Firm	Advanced Compliance Solutions, Inc.

Operating Frequencies

Frequency Range	Application Purpose	Final Action Date
2405-2480 MHz	Original Equipment	2007-09-05
896-901 MHz	Original Equipment	2007-09-05

Exhibits

Document	Type	Available	File
EXTERNAL PHOTOS	External Photos	2007-09-05	PDF 19 KB
LABEL INFORMATION	ID Label/Location Info	2007-09-05	PDF 126.6 KB
TEST SETUP PHOTOS	Test Setup Photos	2007-09-05	PDF 755.7 KB
TEST REPORT	Test Report	2007-09-05	PDF 305.7 KB
TEST REPORT	Test Report	2007-09-05	PDF 667.8 KB
CONFIDENTIALITY REQUEST	Cover Letter(s)	2007-09-05	PDF 32.1 KB
MODULAR APPROVAL LETTER	Cover Letter(s)	2007-09-05	PDF 13.7 KB
RF EXPOSURE	RF Exposure Info	2007-09-05	PDF 29.5 KB

Application Information

Application ID	WU8xuOM1aJJQIZEwVxdZEQ==
Final Action Date	2007-09-05
Application Purpose	Original Equipment
Applicant FRN	0003180007
Model	APXCVRZIG01
Frequency Range	2405-2480 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	AP/APX ZIGBEE TRANSCEIVER
Responsible Party	Richard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912
Test Firm	Douglas Massey, Advanced Compliance Solutions, Inc., dmassey@acstestlab.com , 770-831-8048
TCB Email	TEI@TIMCOENGR.COM
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Modular Approval. Power listed is conducted. This modular approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application ID	Date	Purpose
WU8xuOM1aJJQIZEwVxdZEQ==	2007-09-05	Original Equipment
6c2BGNnQYlT4cdVznCpQzg==	2007-09-05	Original Equipment

Equipment Authorization

Frequency	Output	Tolerance	Emission	Rules
896-901 MHz	1	1ppm	9K60F2D	9
896-901 MHz	1	1ppm	4K80F2D	9
901-902 MHz	1	1ppm	4K80F2D	24D
928.85-929 MHz	1	1ppm	9K60F2D	101C
928.85-929 MHz	1	1ppm	4K80F2D	101C
930-931 MHz	1	1ppm	5K90F1D	24D
932-932.5 MHz	1	1ppm	9K60F2D	101C
932-932.5 MHz	1	1ppm	4K80F2D	101C
935-940 MHz	1	1ppm	5K90F1D	9
940-941 MHz	1	1ppm	5K90F1D	24D
941-941.5 MHz	1	1ppm	5K90F1D	101C
959.85-960 MHz	1	1ppm	5K90F1D	101C
2405-2480 MHz	0.0040000			15C

Grants

TCB Grant - Application WU8xuOM1aJJQIZEwVxdZEQ==

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 09/05/2007

Application Dated: 09/04/2007

Sensus Metering Systems Inc.

639 Davis Drive

Morrisville, NC 27560

Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SDBAPXCVRZIG01

Name of Grantee:	Sensus Metering Systems Inc.

Equipment Class:	Digital Transmission System
Notes:	AP/APX ZIGBEE TRANSCEIVER
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2405.0 - 2480.0	0.004

Modular Approval. Power listed is conducted. This modular approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application WU8xuOM1aJJQIZEwVxdZEQ==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States

Date of Grant: 09/05/2007

Application Dated: 09/04/2007

Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SDBAPXCVRZIG01

Name of Grantee:	Sensus Metering Systems Inc.

Equipment Class:	Digital Transmission System
Notes:	AP/APX ZIGBEE TRANSCEIVER
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2405.0 - 2480.0	0.004

Mail To:

EA390536

TCB Grant - Application 6c2BGNnQYlT4cdVznCpQzg==

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 09/05/2007

Application Dated: 09/04/2007

Sensus Metering Systems Inc.

639 Davis Drive

Morrisville, NC 27560

Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SDBAPXCVRZIG01

Name of Grantee:	Sensus Metering Systems Inc.

Equipment Class:	PCS Licensed Transmitter
Notes:	AP/APX ZIGBEE TRANSCEIVER
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24D	901.0 - 902.0	1.0	1.0 PM	9K60F2D
	24D	901.0 - 902.0	1.0	1.0 PM	4K80F2D
	24D	930.0 - 931.0	1.0	1.0 PM	5K90F1D
	24D	940.0 - 941.0	1.0	1.0 PM	5K90F1D
	90	896.0 - 901.0	1.0	1.0 PM	9K60F2D
	90	896.0 - 901.0	1.0	1.0 PM	4K80F2D
	90	935.0 - 940.0	1.0	1.0 PM	5K90F1D
	101C	928.85 - 929.0	1.0	1.0 PM	9K60F2D
	101C	928.85 - 929.0	1.0	1.0 PM	4K80F2D
	101C	932.0 - 932.5	1.0	1.0 PM	9K60F2D
	101C	932.0 - 932.5	1.0	1.0 PM	4K80F2D
	101C	941.0 - 941.5	1.0	1.0 PM	5K90F1D
	101C	959.85 - 960.0	1.0	1.0 PM	5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application 6c2BGNnQYlT4cdVznCpQzg==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States

Date of Grant: 09/05/2007

Application Dated: 09/04/2007

Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SDBAPXCVRZIG01

Name of Grantee:	Sensus Metering Systems Inc.

Equipment Class:	PCS Licensed Transmitter
Notes:	AP/APX ZIGBEE TRANSCEIVER
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24D	901.0 - 902.0	1.0	1.0 PM	9K60F2D
	24D	901.0 - 902.0	1.0	1.0 PM	4K80F2D
	24D	930.0 - 931.0	1.0	1.0 PM	5K90F1D
	24D	940.0 - 941.0	1.0	1.0 PM	5K90F1D
	90	896.0 - 901.0	1.0	1.0 PM	9K60F2D
	90	896.0 - 901.0	1.0	1.0 PM	4K80F2D
	90	935.0 - 940.0	1.0	1.0 PM	5K90F1D
	101C	928.85 - 929.0	1.0	1.0 PM	9K60F2D
	101C	928.85 - 929.0	1.0	1.0 PM	4K80F2D
	101C	932.0 - 932.5	1.0	1.0 PM	9K60F2D
	101C	932.0 - 932.5	1.0	1.0 PM	4K80F2D
	101C	941.0 - 941.5	1.0	1.0 PM	5K90F1D
	101C	959.85 - 960.0	1.0	1.0 PM	5K90F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Mail To:

EA357069