FCC ID SDBFLEXELS

Radio Telemetry Module

by Sensus Metering Systems Inc.

Grantee Code: SDB   Product Code: FLEXELS
Latest application date: 2014-01-08

FCC ID Device Details

FCC IDSDBFLEXELS
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSDB
Product CodeFLEXELS
Applicant BusinessSensus Metering Systems Inc. 🇺🇸
Related Domains sensus.com
Equipment ClassRadio Telemetry Module
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
896.038-901 MHzClass II permissive change or modification of presently authorized equipment2014-01-08
896.038-901 MHzOriginal Equipment2012-01-17

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2012-01-17PDF 3 MB
Int PhotosInternal Photos2012-01-17PDF 161.5 KB
Internal DetailInternal Photos2012-01-17PDF 949.3 KB
Ext PhotosExternal Photos2012-01-17PDF 110.1 KB
LabelingID Label/Location Info2012-01-17PDF 316.1 KB
Test Setup PhotosTest Setup Photos2014-01-08PDF 125.7 KB
Test SetupTest Setup Photos2012-01-17PDF 1.6 MB
Test ReportTest Report2014-01-08PDF 3.6 MB
Test ReportTest Report2012-01-17PDF 3.8 MB
Agency AgreementCover Letter(s)2014-01-08PDF 90.3 KB
FCC Cover LetterCover Letter(s)2014-01-08PDF 88.3 KB
Agent AuthorizationCover Letter(s)2012-01-17PDF 60.6 KB
Confid RequestCover Letter(s)2012-01-17PDF 38.8 KB
Modular RequestCover Letter(s)2012-01-17PDF 44 KB
RF ExposureRF Exposure Info2012-01-17PDF 30.1 KB

Application Information

Application IDP0GXblcK0zY/cJlhdgpaBg==
Final Action Date2014-01-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003180007
ModelFLEXELS
Frequency Range896.038-901 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionRadio Telemetry Module
Responsible PartyRichard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to correct original emission designators and to add new emission designators.

Applications

Application IDDatePurpose
P0GXblcK0zY/cJlhdgpaBg==2014-01-08Class II permissive change or modification of presently authorized equipment
LDxXMlez4IFWXmxiDwtvfw==2012-01-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
896.038-901 MHz0.9611ppm12K3F1D9
896.038-901 MHz0.9661.5ppm4K80F2D9
896.038-901 MHz0.9661.5ppm9K60F2D9
896.038-901 MHz0.9661.5ppm5K90F1D9
901-902 MHz0.9471ppm11K8F1D24D
901-902 MHz0.9471ppm6K01F2D24D
901-902 MHz0.9441ppm12K3F1D24D
928.85-929 MHz0.9731ppm12K3F1D101C
928.85-929 MHz0.9751.5ppm4K80F2D101C
928.85-929 MHz0.9751.5ppm9K60F2D101C
928.85-929 MHz0.9751.5ppm5K90F1D101C
928.85-929 MHz0.9751.5ppm11K8F1D101C
928.85-929 MHz0.9751ppm6K01F2D101C
930-931 MHz0.9841ppm4K80F2D24D
930-931 MHz0.9841ppm9K60F2D24D
930-931 MHz0.9841ppm6K01F2D24D
930-931 MHz0.9841ppm5K90F1D24D
930-931 MHz0.981ppm12K3F1D24D
930-931 MHz0.9841ppm11K8F1D24D
932-932.5 MHz0.9891ppm6K01F2D101C
932-932.5 MHz0.9891ppm12K3F1D101C
932-932.5 MHz0.9891.5ppm4K80F2D101C
932-932.5 MHz0.9891.5ppm9K60F2D101C
932-932.5 MHz0.9891.5ppm5K90F1D101C
932-932.5 MHz0.9891.5ppm11K8F1D101C
935-940 MHz0.9961ppm6K01F2D9
935-940 MHz0.9961.5ppm4K80F2D9
935-940 MHz0.9961.5ppm9K60F2D9
935-940 MHz0.9961.5ppm5K90F1D9
935-940 MHz0.991ppm12K3F1D9
940-941 MHz0.9961ppm9K60F2D24D
940-941 MHz0.9961ppm5K90F1D24D
940-941 MHz0.9961ppm11K8F1D24D
940-941 MHz0.9961ppm4K80F2D24D
941-941.5 MHz0.9961ppm6K01F2D101C
941-941.5 MHz0.9961ppm12K3F1D101C
941-941.5 MHz0.9961.5ppm4K80F2D101C
941-941.5 MHz0.9961.5ppm9K60F2D101C
941-941.5 MHz0.9961.5ppm5K90F1D101C
941-941.5 MHz0.9961.5ppm11K8F1D101C
959.85-960 MHz0.9981ppm6K01F2D101C
959.85-960 MHz0.9981ppm12K3F1D101C
959.85-960 MHz0.9981.5ppm4K80F2D101C
959.85-960 MHz0.9981.5ppm9K60F2D101C
959.85-960 MHz0.9981.5ppm5K90F1D101C
959.85-960 MHz0.9981.5ppm11K8F1D101C

Grants

TCB Grant - Application P0GXblcK0zY/cJlhdgpaBg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 01/08/2014

Application Dated: 01/08/2014
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXELS
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Telemetry Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24D 901.0  -  902.0 0.947 1.0  PM 4K80F2D
24D 901.0  -  902.0 0.947 1.0  PM 9K60F2D
24D 901.0  -  902.0 0.947 1.0  PM 5K90F1D
24D 901.0  -  902.0 0.947 1.0  PM 11K8F1D
24D 930.0  -  931.0 0.984 1.0  PM 4K80F2D
24D 930.0  -  931.0 0.984 1.0  PM 9K60F2D
24D 930.0  -  931.0 0.984 1.0  PM 5K90F1D
24D 930.0  -  931.0 0.984 1.0  PM 11K8F1D
24D 940.0  -  941.0 0.996 1.0  PM 4K80F2D
24D 940.0  -  941.0 0.996 1.0  PM 9K60F2D
24D 940.0  -  941.0 0.996 1.0  PM 5K90F1D
24D 940.0  -  941.0 0.996 1.0  PM 11K8F1D
101C 928.85  -  929.0 0.975 1.5  PM 4K80F2D
101C 928.85  -  929.0 0.975 1.5  PM 9K60F2D
101C 928.85  -  929.0 0.975 1.5  PM 5K90F1D
101C 928.85  -  929.0 0.975 1.5  PM 11K8F1D
101C 932.0  -  932.5 0.989 1.5  PM 4K80F2D
101C 932.0  -  932.5 0.989 1.5  PM 9K60F2D
101C 932.0  -  932.5 0.989 1.5  PM 5K90F1D
101C 932.0  -  932.5 0.989 1.5  PM 11K8F1D
101C 941.0  -  941.5 0.996 1.5  PM 4K80F2D
101C 941.0  -  941.5 0.996 1.5  PM 9K60F2D
101C 941.0  -  941.5 0.996 1.5  PM 5K90F1D
101C 941.0  -  941.5 0.996 1.5  PM 11K8F1D
101C 959.85  -  960.0 0.998 1.5  PM 4K80F2D
101C 959.85  -  960.0 0.998 1.5  PM 9K60F2D
101C 959.85  -  960.0 0.998 1.5  PM 5K90F1D
101C 959.85  -  960.0 0.998 1.5  PM 11K8F1D
90 896.0375  -  901.0 0.966 1.5  PM 4K80F2D
90 896.0375  -  901.0 0.966 1.5  PM 9K60F2D
90 896.0375  -  901.0 0.966 1.5  PM 5K90F1D
90 935.0  -  940.0 0.996 1.5  PM 4K80F2D
90 935.0  -  940.0 0.996 1.5  PM 9K60F2D
90 935.0  -  940.0 0.996 1.5  PM 5K90F1D

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change to correct original emission designators and to add new emission designators.


EAS Grant - Application P0GXblcK0zY/cJlhdgpaBg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States
  Date of Grant: 01/08/2014

Application Dated: 01/08/2014
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXELS
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Telemetry Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24D 901.0  -  902.0 0.947 1.0  PM 4K80F2D
24D 901.0  -  902.0 0.947 1.0  PM 9K60F2D
24D 901.0  -  902.0 0.947 1.0  PM 5K90F1D
24D 901.0  -  902.0 0.947 1.0  PM 11K8F1D
24D 930.0  -  931.0 0.984 1.0  PM 4K80F2D
24D 930.0  -  931.0 0.984 1.0  PM 9K60F2D
24D 930.0  -  931.0 0.984 1.0  PM 5K90F1D
24D 930.0  -  931.0 0.984 1.0  PM 11K8F1D
24D 940.0  -  941.0 0.996 1.0  PM 4K80F2D
24D 940.0  -  941.0 0.996 1.0  PM 9K60F2D
24D 940.0  -  941.0 0.996 1.0  PM 5K90F1D
24D 940.0  -  941.0 0.996 1.0  PM 11K8F1D
101C 928.85  -  929.0 0.975 1.5  PM 4K80F2D
101C 928.85  -  929.0 0.975 1.5  PM 9K60F2D
101C 928.85  -  929.0 0.975 1.5  PM 5K90F1D
101C 928.85  -  929.0 0.975 1.5  PM 11K8F1D
101C 932.0  -  932.5 0.989 1.5  PM 4K80F2D
101C 932.0  -  932.5 0.989 1.5  PM 9K60F2D
101C 932.0  -  932.5 0.989 1.5  PM 5K90F1D
101C 932.0  -  932.5 0.989 1.5  PM 11K8F1D
101C 941.0  -  941.5 0.996 1.5  PM 4K80F2D
101C 941.0  -  941.5 0.996 1.5  PM 9K60F2D
101C 941.0  -  941.5 0.996 1.5  PM 5K90F1D
101C 941.0  -  941.5 0.996 1.5  PM 11K8F1D
101C 959.85  -  960.0 0.998 1.5  PM 4K80F2D
101C 959.85  -  960.0 0.998 1.5  PM 9K60F2D
101C 959.85  -  960.0 0.998 1.5  PM 5K90F1D
101C 959.85  -  960.0 0.998 1.5  PM 11K8F1D
90 896.0375  -  901.0 0.966 1.5  PM 4K80F2D
90 896.0375  -  901.0 0.966 1.5  PM 9K60F2D
90 896.0375  -  901.0 0.966 1.5  PM 5K90F1D
90 935.0  -  940.0 0.996 1.5  PM 4K80F2D
90 935.0  -  940.0 0.996 1.5  PM 9K60F2D
90 935.0  -  940.0 0.996 1.5  PM 5K90F1D

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change to correct original emission designators and to add new emission designators.



TCB Grant - Application LDxXMlez4IFWXmxiDwtvfw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/17/2012

Application Dated: 01/16/2012
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXELS
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Telemetry Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 896.0375  -  901.0 0.966 1.0  PM 6K01F2D
90 896.0375  -  901.0 0.961 1.0  PM 12K3F1D
90 935.0  -  940.0 0.996 1.0  PM 6K01F2D
90 935.0  -  940.0 0.99 1.0  PM 12K3F1D
24D 901.0  -  902.0 0.947 1.0  PM 6K01F2D
24D 901.0  -  902.0 0.944 1.0  PM 12K3F1D
24D 930.0  -  931.0 0.984 1.0  PM 6K01F2D
24D 930.0  -  931.0 0.98 1.0  PM 12K3F1D
101C 928.85  -  929.0 0.975 1.0  PM 6K01F2D
101C 928.85  -  929.0 0.973 1.0  PM 12K3F1D
101C 932.0  -  932.5 0.989 1.0  PM 6K01F2D
101C 932.0  -  932.5 0.989 1.0  PM 12K3F1D
101C 941.0  -  941.5 0.996 1.0  PM 6K01F2D
101C 941.0  -  941.5 0.996 1.0  PM 12K3F1D
101C 959.85  -  960.0 0.998 1.0  PM 6K01F2D
101C 959.85  -  960.0 0.998 1.0  PM 12K3F1D

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application LDxXMlez4IFWXmxiDwtvfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States
  Date of Grant: 01/17/2012

Application Dated: 01/16/2012
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXELS
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Telemetry Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 896.0375  -  901.0 0.966 1.0  PM 6K01F2D
90 896.0375  -  901.0 0.961 1.0  PM 12K3F1D
90 935.0  -  940.0 0.996 1.0  PM 6K01F2D
90 935.0  -  940.0 0.99 1.0  PM 12K3F1D
24D 901.0  -  902.0 0.947 1.0  PM 6K01F2D
24D 901.0  -  902.0 0.944 1.0  PM 12K3F1D
24D 930.0  -  931.0 0.984 1.0  PM 6K01F2D
24D 930.0  -  931.0 0.98 1.0  PM 12K3F1D
101C 928.85  -  929.0 0.975 1.0  PM 6K01F2D
101C 928.85  -  929.0 0.973 1.0  PM 12K3F1D
101C 932.0  -  932.5 0.989 1.0  PM 6K01F2D
101C 932.0  -  932.5 0.989 1.0  PM 12K3F1D
101C 941.0  -  941.5 0.996 1.0  PM 6K01F2D
101C 941.0  -  941.5 0.996 1.0  PM 12K3F1D
101C 959.85  -  960.0 0.998 1.0  PM 6K01F2D
101C 959.85  -  960.0 0.998 1.0  PM 12K3F1D

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: