1. FCC ID
  2. SDB
  3. SDBFLEXGE100

FCC ID SDBFLEXGE100

Utility Meter Module FLEXGE100

by Sensus Metering Systems Inc.

Grantee Code: SDB   Product Code: FLEXGE100
Latest application date: 2014-07-24

FCC ID Device Details

FCC IDSDBFLEXGE100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSDB
Product CodeFLEXGE100
Applicant BusinessSensus Metering Systems Inc. 🇺🇸
Related Domains xylem.com
Equipment ClassUtility Meter Module FLEXGE100
Test FirmTUV SUD America, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
896.038-901 MHzClass II permissive change or modification of presently authorized equipment2014-07-24
896.038-900.988 MHzOriginal Equipment2011-04-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-04-18PDF 536.6 KB
Internal PhotographsInternal Photos2011-04-18PDF 841.4 KB
External PhotographsExternal Photos2011-04-18PDF 241.6 KB
Label LocationID Label/Location Info2011-04-18PDF 157.8 KB
Test Setup PhotosTest Setup Photos2014-07-24PDF 198.8 KB
Test Setup PhotographsTest Setup Photos2011-04-18PDF 731.6 KB
Test ReportTest Report2014-07-24PDF 477.7 KB
Test ReportTest Report2011-04-18PDF 2.6 MB
Agency AgreementCover Letter(s)2014-07-24PDF 90 KB
Confidentiality RequestCover Letter(s)2014-07-24PDF 79.7 KB
FCC Cover LetterCover Letter(s)2014-07-24PDF 20.6 KB
Modular Approval RequestCover Letter(s)2011-04-18PDF 44.2 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 867.9 KB

Application Information

Application IDW7U3s9Z1xGvoT9EQGVf8vQ==
Final Action Date2014-07-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003180007
ModelFLEXGE100
Frequency Range896.038-901 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionUtility Meter Module FLEXGE100
Responsible PartyMilton Ray Britt, Sr. Director, Global System Test, ray.britt@xylem.com , 919-317-6335
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmSam Wismer, TUV SUD America, Inc., swismer@tuvam.com , 678-341-5924
TCB Emailjwoods@acstestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna gain must not exceed 0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new modulation type and correct original emission designators.

Applications

Application IDDatePurpose
W7U3s9Z1xGvoT9EQGVf8vQ==2014-07-24Class II permissive change or modification of presently authorized equipment
C6eXRXWEAyJDz9aDC5D1HA==2011-04-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
896.038-901 MHz0.9381.5ppm4K80F2D9
896.038-901 MHz0.9381.5ppm9K60F2D9
896.038-901 MHz0.9381.5ppm5K90F1D9
896.038-900.988 MHz0.9380.275ppm14K8F1D9
901-902 MHz0.9321ppm11K8F1D24D
928.85-929 MHz0.9731.5ppm4K80F2D101C
928.85-929 MHz0.9731.5ppm9K60F2D101C
928.85-929 MHz0.9731.5ppm5K90F1D101C
928.85-929 MHz0.9731.5ppm11K8F1D101C
928.875-928.975 MHz0.2730.272ppm14K8F1D101C
928.875-928.975 MHz0.9890.273ppm14K8F1D101C
930-931 MHz0.9961ppm4K80F2D24D
930-931 MHz0.9961ppm9K60F2D24D
930-931 MHz0.9961ppm5K90F1D24D
930-931 MHz0.9961ppm11K8F1D24D
930.025-930.975 MHz0.9960.272ppm14K8F1D24D
932-932.5 MHz0.9891.5ppm4K80F2D101C
932-932.5 MHz0.9891.5ppm9K60F2D101C
932-932.5 MHz0.9891.5ppm5K90F1D101C
932-932.5 MHz0.9891.5ppm11K8F1D101C
932.025-932.475 MHz0.9890.273ppm14K8F1D101C
935-940 MHz0.9891.5ppm4K80F2D9
935-940 MHz0.9891.5ppm9K60F2D9
935-940 MHz0.9891.5ppm5K90F1D9
935.013-939.988 MHz0.9890.275ppm14K8F1D9
940-941 MHz0.9981ppm9K60F2D24D
940-941 MHz0.9981ppm5K90F1D24D
940-941 MHz0.9981ppm11K8F1D24D
940-941 MHz0.9981ppm4K80F2D24D
940.025-940.975 MHz0.9980.272ppm14K8F1D24D
941-941.5 MHz0.9981.5ppm4K80F2D101C
941-941.5 MHz0.9981.5ppm9K60F2D101C
941-941.5 MHz0.9981.5ppm5K90F1D101C
941-941.5 MHz0.9981.5ppm11K8F1D101C
941.025-941.475 MHz0.9980.273ppm14K8F1D101C
959.85-960 MHz0.9981.5ppm4K80F2D101C
959.85-960 MHz0.9981.5ppm9K60F2D101C
959.85-960 MHz0.9981.5ppm5K90F1D101C
959.85-960 MHz0.9981.5ppm11K8F1D101C
959.875-959.975 MHz0.9980.273ppm14K8F1D101C

Grants

TCB Grant - Application W7U3s9Z1xGvoT9EQGVf8vQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 07/24/2014

Application Dated: 07/24/2014
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Milton Britt , Sr. Director, Global System Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXGE100
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Utility Meter Module FLEXGE100
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 0.932 1.0  PM 4K80F2D
24D 901.0  -  902.0 0.932 1.0  PM 9K60F2D
24D 901.0  -  902.0 0.932 1.0  PM 5K90F1D
24D 901.0  -  902.0 0.932 1.0  PM 11K8F1D
24D 930.0  -  931.0 0.996 1.0  PM 4K80F2D
24D 930.0  -  931.0 0.996 1.0  PM 9K60F2D
24D 930.0  -  931.0 0.996 1.0  PM 5K90F1D
24D 930.0  -  931.0 0.996 1.0  PM 11K8F1D
24D 940.0  -  941.0 0.998 1.0  PM 4K80F2D
24D 940.0  -  941.0 0.998 1.0  PM 9K60F2D
24D 940.0  -  941.0 0.998 1.0  PM 5K90F1D
24D 940.0  -  941.0 0.998 1.0  PM 11K8F1D
101C 928.85  -  929.0 0.973 1.5  PM 4K80F2D
101C 928.85  -  929.0 0.973 1.5  PM 9K60F2D
101C 928.85  -  929.0 0.973 1.5  PM 5K90F1D
101C 928.85  -  929.0 0.973 1.5  PM 11K8F1D
101C 932.0  -  932.5 0.989 1.5  PM 4K80F2D
101C 932.0  -  932.5 0.989 1.5  PM 9K60F2D
101C 932.0  -  932.5 0.989 1.5  PM 5K90F1D
101C 932.0  -  932.5 0.989 1.5  PM 11K8F1D
101C 941.0  -  941.5 0.998 1.5  PM 4K80F2D
101C 941.0  -  941.5 0.998 1.5  PM 9K60F2D
101C 941.0  -  941.5 0.998 1.5  PM 5K90F1D
101C 941.0  -  941.5 0.998 1.5  PM 11K8F1D
101C 959.85  -  960.0 0.998 1.5  PM 4K80F2D
101C 959.85  -  960.0 0.998 1.5  PM 9K60F2D
101C 959.85  -  960.0 0.998 1.5  PM 5K90F1D
101C 959.85  -  960.0 0.998 1.5  PM 11K8F1D
90 896.0375  -  901.0 0.938 1.5  PM 4K80F2D
90 896.0375  -  901.0 0.938 1.5  PM 9K60F2D
90 896.0375  -  901.0 0.938 1.5  PM 5K90F1D
90 935.0  -  940.0 0.989 1.5  PM 4K80F2D
90 935.0  -  940.0 0.989 1.5  PM 9K60F2D
90 935.0  -  940.0 0.989 1.5  PM 5K90F1D

Power listed is conducted. The antenna gain must not exceed 0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change to add new modulation type and correct original emission designators.


EAS Grant - Application W7U3s9Z1xGvoT9EQGVf8vQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 07/24/2014

Application Dated: 07/24/2014
 
Attention: Milton Britt , Sr. Director, Global System Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXGE100
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Utility Meter Module FLEXGE100
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 0.932 1.0  PM 4K80F2D
24D 901.0  -  902.0 0.932 1.0  PM 9K60F2D
24D 901.0  -  902.0 0.932 1.0  PM 5K90F1D
24D 901.0  -  902.0 0.932 1.0  PM 11K8F1D
24D 930.0  -  931.0 0.996 1.0  PM 4K80F2D
24D 930.0  -  931.0 0.996 1.0  PM 9K60F2D
24D 930.0  -  931.0 0.996 1.0  PM 5K90F1D
24D 930.0  -  931.0 0.996 1.0  PM 11K8F1D
24D 940.0  -  941.0 0.998 1.0  PM 4K80F2D
24D 940.0  -  941.0 0.998 1.0  PM 9K60F2D
24D 940.0  -  941.0 0.998 1.0  PM 5K90F1D
24D 940.0  -  941.0 0.998 1.0  PM 11K8F1D
101C 928.85  -  929.0 0.973 1.5  PM 4K80F2D
101C 928.85  -  929.0 0.973 1.5  PM 9K60F2D
101C 928.85  -  929.0 0.973 1.5  PM 5K90F1D
101C 928.85  -  929.0 0.973 1.5  PM 11K8F1D
101C 932.0  -  932.5 0.989 1.5  PM 4K80F2D
101C 932.0  -  932.5 0.989 1.5  PM 9K60F2D
101C 932.0  -  932.5 0.989 1.5  PM 5K90F1D
101C 932.0  -  932.5 0.989 1.5  PM 11K8F1D
101C 941.0  -  941.5 0.998 1.5  PM 4K80F2D
101C 941.0  -  941.5 0.998 1.5  PM 9K60F2D
101C 941.0  -  941.5 0.998 1.5  PM 5K90F1D
101C 941.0  -  941.5 0.998 1.5  PM 11K8F1D
101C 959.85  -  960.0 0.998 1.5  PM 4K80F2D
101C 959.85  -  960.0 0.998 1.5  PM 9K60F2D
101C 959.85  -  960.0 0.998 1.5  PM 5K90F1D
101C 959.85  -  960.0 0.998 1.5  PM 11K8F1D
90 896.0375  -  901.0 0.938 1.5  PM 4K80F2D
90 896.0375  -  901.0 0.938 1.5  PM 9K60F2D
90 896.0375  -  901.0 0.938 1.5  PM 5K90F1D
90 935.0  -  940.0 0.989 1.5  PM 4K80F2D
90 935.0  -  940.0 0.989 1.5  PM 9K60F2D
90 935.0  -  940.0 0.989 1.5  PM 5K90F1D

Power listed is conducted. The antenna gain must not exceed 0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change to add new modulation type and correct original emission designators.



TCB Grant - Application C6eXRXWEAyJDz9aDC5D1HA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 04/18/2011

Application Dated: 04/15/2011
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXGE100
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Utility Meter Module FLEXGE100
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.025  -  901.975 0.932 0.272  PM 14K8F1D
24D 930.025  -  930.975 0.996 0.272  PM 14K8F1D
24D 940.025  -  940.975 0.998 0.272  PM 14K8F1D
90 896.0375  -  900.9875 0.938 0.275  PM 14K8F1D
90 935.0125  -  939.9875 0.989 0.275  PM 14K8F1D
101C 928.875  -  928.975 0.273 0.272  PM 14K8F1D
101C 928.875  -  928.975 0.989 0.273  PM 14K8F1D
101C 932.025  -  932.475 0.989 0.273  PM 14K8F1D
101C 941.025  -  941.475 0.998 0.273  PM 14K8F1D
101C 959.875  -  959.975 0.998 0.273  PM 14K8F1D

Power listed is conducted. The antenna gain must not exceed 0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application C6eXRXWEAyJDz9aDC5D1HA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 04/18/2011

Application Dated: 04/15/2011
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBFLEXGE100
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Utility Meter Module FLEXGE100
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.025  -  901.975 0.932 0.272  PM 14K8F1D
24D 930.025  -  930.975 0.996 0.272  PM 14K8F1D
24D 940.025  -  940.975 0.998 0.272  PM 14K8F1D
90 896.0375  -  900.9875 0.938 0.275  PM 14K8F1D
90 935.0125  -  939.9875 0.989 0.275  PM 14K8F1D
101C 928.875  -  928.975 0.273 0.272  PM 14K8F1D
101C 928.875  -  928.975 0.989 0.273  PM 14K8F1D
101C 932.025  -  932.475 0.989 0.273  PM 14K8F1D
101C 941.025  -  941.475 0.998 0.273  PM 14K8F1D
101C 959.875  -  959.975 0.998 0.273  PM 14K8F1D

Power listed is conducted. The antenna gain must not exceed 0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: