FCC ID SDBHANXCVR01
HAN FlexNet Tranceiver
by Sensus Metering Systems Inc.
Grantee Code: SDB Product Code: HANXCVR01
Latest application date: 2009-02-16
FCC ID Device Details
| FCC ID | SDBHANXCVR01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SDB |
| Product Code | HANXCVR01 |
| Applicant Business | Sensus Metering Systems Inc. 🇺🇸 |
| Related Domains |  sensus.com |
| Equipment Class | HAN FlexNet Tranceiver |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 932-932.5 MHz | Original Equipment | 2009-02-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2009-02-16 | PDF 2 MB |
| Internal Photos | Internal Photos | 2009-02-16 | PDF 213 KB |
| External Photos | External Photos | 2009-02-16 | PDF 18.4 KB |
| Label Information | ID Label/Location Info | 2009-02-16 | PDF 207.4 KB |
| Test Setup Photos | Test Setup Photos | 2009-02-16 | PDF 135.5 KB |
| Test Report | Test Report | 2009-02-16 | PDF 311.9 KB |
| Agency Agreement | Cover Letter(s) | 2009-02-16 | PDF 218.7 KB |
| FCC Confidentiality Request | Cover Letter(s) | 2009-02-16 | PDF 18.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2009-02-16 | PDF 17.7 KB |
| RF Exposure | RF Exposure Info | 2009-02-16 | PDF 28.5 KB |
Application Information
| Application ID | xyzVNRggK6WbdIJi0sTq5g== |
|---|---|
| Final Action Date | 2009-02-16 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0003180007 |
| Model | HANXCVR01 |
| Frequency Range | 932-932.5 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | HAN FlexNet Tranceiver |
| Responsible Party | Richard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912 |
| Agent | Kirby Kirby Kirby, Advanced Compliance Solutions, Inc., kmunroe@acstestlab.com  , 770 831 8048 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xyzVNRggK6WbdIJi0sTq5g== | 2009-02-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xyzVNRggK6WbdIJi0sTq5g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/16/2009 Application Dated: 02/16/2009 |
| Sensus Metering Systems Inc. |
| 639 Davis Drive |
| Morrisville, NC 27560 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SDBHANXCVR01 |
| Name of Grantee: | Sensus Metering Systems Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | HAN FlexNet Tranceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24D | 940.0 - 941.0 | 0.045 | 1.0 PM | 5K90F1D | |
| 90 | 935.0 - 940.0 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 932.0 - 932.5 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 941.0 - 941.5 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 959.85 - 960.0 | 0.045 | 1.0 PM | 5K90F1D |
| Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application xyzVNRggK6WbdIJi0sTq5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sensus Metering Systems Inc. 639 Davis Drive Morrisville, NC 27560 United States |
Date of Grant: 02/16/2009 Application Dated: 02/16/2009 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SDBHANXCVR01 |
| Name of Grantee: | Sensus Metering Systems Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | HAN FlexNet Tranceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24D | 940.0 - 941.0 | 0.045 | 1.0 PM | 5K90F1D | |
| 90 | 935.0 - 940.0 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 932.0 - 932.5 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 941.0 - 941.5 | 0.045 | 1.0 PM | 5K90F1D | |
| 101C | 959.85 - 960.0 | 0.045 | 1.0 PM | 5K90F1D |
| Modular Approval. Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For use in RF exposure mobile conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. For use in RF exposure fixed conditions: RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: |