1. FCC ID
  2. SDB
  3. SDBLGZ1000

FCC ID SDBLGZ1000

Flexnet L&G; Focus transceiver with Zigbee

by Sensus Metering Systems Inc.

Grantee Code: SDB   Product Code: LGZ1000
Latest application date: 2013-02-20

FCC ID Device Details

FCC IDSDBLGZ1000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSDB
Product CodeLGZ1000
Applicant BusinessSensus Metering Systems Inc. 🇺🇸
Related Domains sensus.com
Equipment ClassFlexnet L&G; Focus transceiver with Zigbee
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
901-902 MHzClass II permissive change or modification of presently authorized equipment2013-02-20
2405-2480 MHzOriginal Equipment2012-06-15
896.056-901 MHzOriginal Equipment2012-06-15

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2012-06-15PDF 12.8 KB
Label InformationID Label/Location Info2012-06-15PDF 60.6 KB
Test Setup PhotosTest Setup Photos2013-02-20PDF 256.1 KB
Test Setup PhotosTest Setup Photos2012-06-15PDF 186.9 KB
Test Setup PhotosTest Setup Photos2012-06-15PDF 451.5 KB
Test ReportTest Report2013-02-20PDF 172.9 KB
Test ReportTest Report2012-06-15PDF 379.4 KB
Test ReportTest Report2012-06-15PDF 808.1 KB
Agency AgreementCover Letter(s)2013-02-20PDF 65.8 KB
Confidentiality RequestCover Letter(s)2013-02-20PDF 37.7 KB
FCC Cover LetterCover Letter(s)2013-02-20PDF 18.2 KB
Agency AgreementCover Letter(s)2012-06-15PDF 61.2 KB
Confidentiality RequestCover Letter(s)2012-06-15PDF 13.3 KB
FCC Cover LetterCover Letter(s)2012-06-15PDF 12.4 KB
Modular Approval LetterCover Letter(s)2012-06-15PDF 47.3 KB
NDA LetterCover Letter(s)2012-06-15PDF 61.8 KB
RF ExposureRF Exposure Info2012-06-15PDF 32.7 KB

Application Information

Application IDXxPKEbExJbQQozfKa+23IQ==
Final Action Date2013-02-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003180007
ModelLGZ1000
Frequency Range901-902 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionFlexnet L&G; Focus transceiver with Zigbee
Responsible PartyRichard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 561-961-5585
TCB Emailjwoods@acstestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power listed is conducted. This Modular Approval is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change as described in this filing.

Applications

Application IDDatePurpose
XxPKEbExJbQQozfKa+23IQ==2013-02-20Class II permissive change or modification of presently authorized equipment
vvdUHRCRsM/0HvE+0STDyA==2012-06-15Original Equipment
CjBs25Leao7ZmT0Kh3UXLA==2012-06-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
896.056-901 MHz11.5ppm9K60F2D9
896.056-901 MHz11.5ppm4K80F2D9
901-902 MHz11ppm4K80F2D24D
901-902 MHz11ppm9K60F2D24D
928.85-929 MHz11.5ppm9K60F2D101C
928.85-929 MHz11.5ppm4K80F2D101C
930-931 MHz11ppm5K90F1D24D
930-931 MHz11ppm11K8F1D24D
932-932.5 MHz11.5ppm9K60F2D101C
932-932.5 MHz11.5ppm4K80F2D101C
935-940 MHz11.5ppm5K90F1D9
940-941 MHz11ppm5K90F1D24D
940-941 MHz11ppm11K8F1D24D
941-941.5 MHz11.5ppm5K90F1D101C
941-941.5 MHz11.5ppm11K8F1D101C
959.85-959.944 MHz11.5ppm5K90F1D101C
959.85-959.944 MHz11.5ppm11K8F1D101C
959.85-959.956 MHz11.5ppm5K90F1D101C
959.85-959.956 MHz11.5ppm11K8F1D101C
2405-2480 MHz0.131000015C

Grants

TCB Grant - Application XxPKEbExJbQQozfKa+23IQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
 Date of Grant: 02/20/2013

Application Dated: 02/20/2013
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Flexnet L&G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 930.0  -  931.0 1.0 1.0  PM 11K8F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 11K8F1D
101C 928.85  -  929.0 1.0 1.5  PM 4K80F2D
101C 928.85  -  929.0 1.0 1.5  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.5  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.5  PM 9K60F2D
101C 941.0  -  941.5 1.0 1.5  PM 5K90F1D
101C 941.0  -  941.5 1.0 1.5  PM 11K8F1D
101C 959.85  -  959.94375 1.0 1.5  PM 5K90F1D
101C 959.85  -  959.94375 1.0 1.5  PM 11K8F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Change as described in this filing.


EAS Grant - Application XxPKEbExJbQQozfKa+23IQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 02/20/2013

Application Dated: 02/20/2013
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Flexnet L&G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 930.0  -  931.0 1.0 1.0  PM 11K8F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 11K8F1D
101C 928.85  -  929.0 1.0 1.5  PM 4K80F2D
101C 928.85  -  929.0 1.0 1.5  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.5  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.5  PM 9K60F2D
101C 941.0  -  941.5 1.0 1.5  PM 5K90F1D
101C 941.0  -  941.5 1.0 1.5  PM 11K8F1D
101C 959.85  -  959.94375 1.0 1.5  PM 5K90F1D
101C 959.85  -  959.94375 1.0 1.5  PM 11K8F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Change as described in this filing.



TCB Grant - Application vvdUHRCRsM/0HvE+0STDyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
 Date of Grant: 06/15/2012

Application Dated: 06/15/2012
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: Digital Transmission System
Notes: Flexnet L+G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2405.0  -  2480.0 0.131  

Modular Approval. Power listed is conducted. This modular approval is limited to products operating as mobile or fixed transmitting device. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application vvdUHRCRsM/0HvE+0STDyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 06/15/2012

Application Dated: 06/15/2012
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: Digital Transmission System
Notes: Flexnet L+G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2405.0  -  2480.0 0.131  

Modular Approval. Power listed is conducted. This modular approval is limited to products operating as mobile or fixed transmitting device. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



TCB Grant - Application CjBs25Leao7ZmT0Kh3UXLA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
 Date of Grant: 06/15/2012

Application Dated: 06/15/2012
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Flexnet L+G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 930.0  -  931.0 1.0 1.0  PM 11K8F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 11K8F1D
90 896.05625  -  901.0 1.0 1.5  PM 9K60F2D
90 896.05625  -  901.0 1.0 1.5  PM 4K80F2D
90 935.0  -  940.0 1.0 1.5  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.5  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.5  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.5  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.5  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.5  PM 5K90F1D
101C 941.0  -  941.5 1.0 1.5  PM 11K8F1D
101C 959.85  -  959.95625 1.0 1.5  PM 5K90F1D
101C 959.85  -  959.95625 1.0 1.5  PM 11K8F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application CjBs25Leao7ZmT0Kh3UXLA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 06/15/2012

Application Dated: 06/15/2012
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBLGZ1000
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Flexnet L+G Focus transceiver with Zigbee
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 901.0  -  902.0 1.0 1.0  PM 9K60F2D
24D 901.0  -  902.0 1.0 1.0  PM 4K80F2D
24D 930.0  -  931.0 1.0 1.0  PM 5K90F1D
24D 930.0  -  931.0 1.0 1.0  PM 11K8F1D
24D 940.0  -  941.0 1.0 1.0  PM 5K90F1D
24D 940.0  -  941.0 1.0 1.0  PM 11K8F1D
90 896.05625  -  901.0 1.0 1.5  PM 9K60F2D
90 896.05625  -  901.0 1.0 1.5  PM 4K80F2D
90 935.0  -  940.0 1.0 1.5  PM 5K90F1D
101C 928.85  -  929.0 1.0 1.5  PM 9K60F2D
101C 928.85  -  929.0 1.0 1.5  PM 4K80F2D
101C 932.0  -  932.5 1.0 1.5  PM 9K60F2D
101C 932.0  -  932.5 1.0 1.5  PM 4K80F2D
101C 941.0  -  941.5 1.0 1.5  PM 5K90F1D
101C 941.0  -  941.5 1.0 1.5  PM 11K8F1D
101C 959.85  -  959.95625 1.0 1.5  PM 5K90F1D
101C 959.85  -  959.95625 1.0 1.5  PM 11K8F1D

Modular Approval. Power listed is conducted. This Modular Approval is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: