1. FCC ID
  2. SDB
  3. SDBTGB001HP

FCC ID SDBTGB001HP

Base Station Transceiver

by Sensus Metering Systems Inc.

Grantee Code: SDB   Product Code: TGB001HP
Latest application date: 2012-10-04

FCC ID Device Details

FCC IDSDBTGB001HP
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSDB
Product CodeTGB001HP
Applicant BusinessSensus Metering Systems Inc. 🇺🇸
Related Domains sensus.com
Equipment ClassBase Station Transceiver
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
928.85-929 MHzClass II permissive change or modification of presently authorized equipment2012-10-04
930-931 MHzOriginal Equipment2005-06-15

Exhibits

DocumentTypeAvailableFile
USERS MANUAL 1Users Manual2005-06-15PDF 70.9 KB
USERS MANUAL 2Users Manual2005-06-15PDF 55.4 KB
INTERNAL PHOTOSInternal Photos2005-06-15PDF 487.8 KB
EXTERNAL PHOTOSExternal Photos2005-06-15PDF 178.7 KB
ID LABELID Label/Location Info2005-06-15PDF 148.2 KB
Test Setup PhotosTest Setup Photos2012-10-04PDF 276.3 KB
Test ReportTest Report2012-10-04PDF 506.4 KB
TEST REPORTTest Report2005-06-15PDF 219.5 KB
NDA AgreementAttestation Statements2012-10-04PDF 125.3 KB
Agency AgreementCover Letter(s)2012-10-04PDF 65.3 KB
Confidentiality RequestCover Letter(s)2012-10-04PDF 34 KB
FCC Cover LetterCover Letter(s)2012-10-04PDF 18.4 KB
CONFIDENTIALITY LETTERCover Letter(s)2005-06-15PDF 33.8 KB
RF ExposureRF Exposure Info2012-10-04PDF 32.6 KB

Application Information

Application IDZz4tm9BZROx+7uVpnVZk+g==
Final Action Date2012-10-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003180007
ModelTGB001HP
Frequency Range928.85-929 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionBase Station Transceiver
Responsible PartyRichard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 561-961-5585
TCB Emailjwoods@acstestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Part 24: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Part 90 and 101: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 32.21W and the peak radiated output power must not exceed 419W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Class II Change as described in this filing.

Applications

Application IDDatePurpose
Zz4tm9BZROx+7uVpnVZk+g==2012-10-04Class II permissive change or modification of presently authorized equipment
15hNvDEpB/yPvfUT+ws2sQ==2005-06-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
928.85-929 MHz32.211.5ppm5K90F1D101C
928.85-929 MHz32.211.5ppm11K8F1D101C
930-931 MHz31.841ppm5K90F1D24D
930-931 MHz31.841ppm11K8F1D24D
932-932.5 MHz32.211.5ppm5K90F1D101C
932-932.5 MHz32.211.5ppm11K8F1D101C
935-940 MHz32.210.1ppm5K90F1D9
940-941 MHz31.841ppm5K90F1D24D
940-941 MHz31.841ppm11K8F1D24D
941-941.5 MHz31.991.5ppm11K8F1D101C
941-941.5 MHz31.991.5ppm5K90F1D101C
959.85-960 MHz31.841.5ppm5K90F1D101C
959.85-960 MHz31.841.5ppm11K8F1D101C

Grants

TCB Grant - Application Zz4tm9BZROx+7uVpnVZk+g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
 Date of Grant: 10/04/2012

Application Dated: 10/04/2012
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBTGB001HP
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 930.0  -  931.0 31.84 1.0  PM 5K90F1D
24D 930.0  -  931.0 31.84 1.0  PM 11K8F1D
24D 940.0  -  941.0 31.84 1.0  PM 5K90F1D
24D 940.0  -  941.0 31.84 1.0  PM 11K8F1D
101C 928.85  -  929.0 32.21 1.5  PM 5K90F1D
101C 928.85  -  929.0 32.21 1.5  PM 11K8F1D
101C 932.0  -  932.5 32.21 1.5  PM 5K90F1D
101C 932.0  -  932.5 32.21 1.5  PM 11K8F1D
101C 941.0  -  941.5 31.99 1.5  PM 5K90F1D
101C 941.0  -  941.5 31.99 1.5  PM 11K8F1D
101C 959.85  -  960.0 31.84 1.5  PM 5K90F1D
101C 959.85  -  960.0 31.84 1.5  PM 11K8F1D

Power listed is conducted. Part 24: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Part 90 and 101: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 32.21W and the peak radiated output power must not exceed 419W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II Change as described in this filing.


EAS Grant - Application Zz4tm9BZROx+7uVpnVZk+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 10/04/2012

Application Dated: 10/04/2012
 
Attention: Richard Daniel , Director, Engineering NPI and Project Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBTGB001HP
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 930.0  -  931.0 31.84 1.0  PM 5K90F1D
24D 930.0  -  931.0 31.84 1.0  PM 11K8F1D
24D 940.0  -  941.0 31.84 1.0  PM 5K90F1D
24D 940.0  -  941.0 31.84 1.0  PM 11K8F1D
101C 928.85  -  929.0 32.21 1.5  PM 5K90F1D
101C 928.85  -  929.0 32.21 1.5  PM 11K8F1D
101C 932.0  -  932.5 32.21 1.5  PM 5K90F1D
101C 932.0  -  932.5 32.21 1.5  PM 11K8F1D
101C 941.0  -  941.5 31.99 1.5  PM 5K90F1D
101C 941.0  -  941.5 31.99 1.5  PM 11K8F1D
101C 959.85  -  960.0 31.84 1.5  PM 5K90F1D
101C 959.85  -  960.0 31.84 1.5  PM 11K8F1D

Power listed is conducted. Part 24: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Part 90 and 101: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 32.21W and the peak radiated output power must not exceed 419W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II Change as described in this filing.



TCB Grant - Application 15hNvDEpB/yPvfUT+ws2sQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 06/15/2005

Application Dated: 06/15/2005
Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
 
Attention: Milton Britt , Sr. Director, Global System Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBTGB001HP
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: BASE STATION TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 930.0  -  931.0 31.84 1.0  PM 5K90F1D
24D 940.0  -  941.0 31.84 1.0  PM 5K90F1D
90 935.0  -  940.0 32.21 0.1  PM 5K90F1D
101C 941.0  -  941.5 31.99 1.5  PM 5K90F1D
101C 959.85  -  960.0 31.84 1.5  PM 5K90F1D

Power listed is conducted. Part 24: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Part 90 and 101: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 32.21W and the peak radiated output power must not exceed 419W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application 15hNvDEpB/yPvfUT+ws2sQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sensus Metering Systems Inc.
639 Davis Drive
Morrisville, NC 27560
United States 		  Date of Grant: 06/15/2005

Application Dated: 06/15/2005
 
Attention: Milton Britt , Sr. Director, Global System Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SDBTGB001HP
Name of Grantee:  Sensus Metering Systems Inc.
Equipment Class: PCS Licensed Transmitter
Notes: BASE STATION TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24D 930.0  -  931.0 31.84 1.0  PM 5K90F1D
24D 940.0  -  941.0 31.84 1.0  PM 5K90F1D
90 935.0  -  940.0 32.21 0.1  PM 5K90F1D
101C 941.0  -  941.5 31.99 1.5  PM 5K90F1D
101C 959.85  -  960.0 31.84 1.5  PM 5K90F1D

Power listed is conducted. Part 24: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Part 90 and 101: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 32.21W and the peak radiated output power must not exceed 419W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



Mail To: