FCC ID SGJ-WFC001

VN210 Module

by Yokogawa Electric Corporation

Grantee Code: SGJ   Product Code: WFC001
Latest application date: 2013-05-31

FCC ID Device Details

FCC IDSGJ-WFC001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSGJ
Product CodeWFC001
Applicant BusinessYokogawa Electric Corporation 🇯🇵
Related Domains jp.yokogawa.com
Equipment ClassVN210 Module
Test FirmUL Japan, Inc. Shonan EMC EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2475 MHzClass II permissive change or modification of presently authorized equipment2013-05-31
2405-2475 MHzClass II permissive change or modification of presently authorized equipment2010-12-24
2405-2475 MHzOriginal Equipment2010-06-25

Exhibits

DocumentTypeAvailableFile
User Manual 2Users Manual2010-06-25PDF 181.9 KB
User manual 1Users Manual2010-06-25PDF 1.3 MB
Intenal PhotosInternal Photos2010-06-25PDF 308.5 KB
(Short-term Confidential)External Photo(Antenna)External Photos2013-11-27PDF 213.5 KB
External PhotosExternal Photos2010-06-25PDF 308.5 KB
ID Label and LocationID Label/Location Info2010-06-25PDF 76.3 KB
(Short-term Confidential)FCC_Setup PhotoTest Setup Photos2013-11-27PDF 672.6 KB
Test setup photosTest Setup Photos2010-12-24PDF 149.2 KB
Test Setup PhotosTest Setup Photos2010-06-25PDF 259.4 KB
FCC Report_reivsed2Test Report2013-05-31PDF 1 MB
Test reportTest Report2010-12-24PDF 339 KB
Test report dataTest Report2010-12-24PDF 258.7 KB
Test Report 1Test Report2010-06-25PDF 574.2 KB
Test Report 2Test Report2010-06-25PDF 1.4 MB
FCC Authorization LetterCover Letter(s)2013-05-31PDF 382.5 KB
FCC Class II Permissive Change LetterCover Letter(s)2013-05-31PDF 479.6 KB
FCC Request for confidentiality letterCover Letter(s)2013-05-31PDF 320 KB
FCC Request for short-term confidentiality letterCover Letter(s)2013-05-31PDF 348.6 KB
Authorization letterCover Letter(s)2010-12-24PDF 328.2 KB
Confidentiality letterCover Letter(s)2010-12-24PDF 265 KB
PCII Application letterCover Letter(s)2010-12-24PDF 332.5 KB
Confidentiality LetterCover Letter(s)2010-06-25PDF 161 KB
LMA letterCover Letter(s)2010-06-25PDF 509.4 KB
FCC RF Exposure sheetRF Exposure Info2013-05-31PDF 54.8 KB
RF EX infoRF Exposure Info2010-12-24PDF 76.4 KB
RF Exposure InfoRF Exposure Info2010-06-25PDF 105.3 KB

Application Information

Application IDvAW0mII52hORA0/SmFhg7A==
Final Action Date2013-05-31
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011404613
Model-WFC001
Frequency Range2405-2475 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionVN210 Module
Responsible PartyHidetatsu Hanzawa, Hidetatsu.Hanzawa@jp.yokogawa.com , 81-422-5558
AgentYoshinobu Yoshinobu Yoshinobu, UL Japan, Inc., Yoshinobu.Asai@ul.com , 81-596-24-8116
Technical ContactToyokazu Imamura, UL Japan, Inc., Toyokazu.Imamura@ul.com , 81-463-50-6400
Test FirmTetsuya Hashimoto, UL Japan, Inc. Shonan EMC EMC Lab., Tetsuya.Hashimoto@jp.ul.com , 81-596-24-8116
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/27/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to add specific antenna described in the filing. Limited Modular Approval. Output power listed is Conducted. For OEM installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions must require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
vAW0mII52hORA0/SmFhg7A==2013-05-31Class II permissive change or modification of presently authorized equipment
xQQkN/MWidyjTqZSle3Zgg==2010-12-24Class II permissive change or modification of presently authorized equipment
E3obME+hSyHZsaTLC33vOg==2010-06-25Original Equipment

Equipment Authorization

FrequencyOutputRules
2405-2475 MHz0.006050015C

Grants

TCB Grant - Application xQQkN/MWidyjTqZSle3Zgg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 12/24/2010

Application Dated: 12/24/2010
Yokogawa Electric Corporation
2-9-32 Nakacho
Musashino-shi
Tokyo, 180-8750
Japan
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Limited Modular Approval. Power listed is conducted. For OEM integration only, device cannot be sold to general public. Use in mobile RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

EAS Grant - Application xQQkN/MWidyjTqZSle3Zgg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Yokogawa Electric Corporation
2-9-32 Nakacho Musashino-shi
Tokyo, 180-8750
Japan
  Date of Grant: 12/24/2010

Application Dated: 12/24/2010
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Limited Modular Approval. Power listed is conducted. For OEM integration only, device cannot be sold to general public. Use in mobile RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.



TCB Grant - Application vAW0mII52hORA0/SmFhg7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 05/31/2013

Application Dated: 05/31/2013
Yokogawa Electric Corporation
2-9-32 Nakacho
Musashino-shi
Tokyo, 180-8750
Japan
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Class II Permissive Change to add specific antenna described in the filing. Limited Modular Approval. Output power listed is Conducted. For OEM installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions must require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

EAS Grant - Application vAW0mII52hORA0/SmFhg7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Yokogawa Electric Corporation
2-9-32 Nakacho Musashino-shi
Tokyo, 180-8750
Japan
  Date of Grant: 05/31/2013

Application Dated: 05/31/2013
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Class II Permissive Change to add specific antenna described in the filing. Limited Modular Approval. Output power listed is Conducted. For OEM installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions must require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.



TCB Grant - Application E3obME+hSyHZsaTLC33vOg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Underwriters Laboratories, Inc.-Northbrook
333 Pfingsten Road
Northbrook, IL 60062
Date of Grant: 06/25/2010

Application Dated: 06/25/2010
Yokogawa Electric Corporation
2-9-32 Nakacho
Musashino-shi
Tokyo, 180-8750
Japan
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Limited Modular Approval. Power listed is conducted. For OEM integration only – device cannot be sold to general public. Use in mobile RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.

EAS Grant - Application E3obME+hSyHZsaTLC33vOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Yokogawa Electric Corporation
2-9-32 Nakacho Musashino-shi
Tokyo, 180-8750
Japan
  Date of Grant: 06/25/2010

Application Dated: 06/25/2010
 
Attention: Hidetatsu Hanzawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SGJ-WFC001
Name of Grantee:  Yokogawa Electric Corporation
Equipment Class: Digital Transmission System
Notes: VN210 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.00605  

Limited Modular Approval. Power listed is conducted. For OEM integration only – device cannot be sold to general public. Use in mobile RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.



Mail To: