FCC ID SH5-CAP
Access Point With Two 802.11abg WLAN Cards
by Miltope Corporation
Grantee Code: SH5 Product Code: CAP
Latest application date: 2004-11-11
FCC ID Device Details
| FCC ID | SH5-CAP |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SH5 |
| Product Code | CAP |
| Applicant Business | Miltope Corporation 🇺🇸 |
| Related Domains |  miltope.com |
| Equipment Class | Access Point With Two 802.11abg WLAN Cards |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-11-11 |
| 2412-2462 MHz | Original Equipment | 2004-10-26 |
| 5180-5320 MHz | Original Equipment | 2004-10-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual Metadata only | Users Manual | 2004-11-11 | PDF 2.8 MB |
| revised manual | Users Manual | 2004-11-11 | PDF 2.7 MB |
| users manual Metadata only | Users Manual | 2004-10-26 | PDF 2.8 MB |
| internal photos | Internal Photos | 2004-10-26 | PDF 341.2 KB |
| antenna and cable photos | External Photos | 2004-10-26 | PDF 184.1 KB |
| external antennas | External Photos | 2004-10-26 | PDF 300.9 KB |
| external photos | External Photos | 2004-10-26 | PDF 172.1 KB |
| label sample and location | ID Label/Location Info | 2004-10-26 | PDF 318.1 KB |
| block diagram | Block Diagram | 2004-10-26 | PDF 67.8 KB |
| test setup photos | Test Setup Photos | 2004-10-26 | PDF 610.2 KB |
| test report | Test Report | 2004-11-11 | PDF 849.9 KB |
| conducted spurious plots | Test Report | 2004-10-26 | PDF 133.6 KB |
| test report | Test Report | 2004-10-26 | PDF 808 KB |
| cover letter | Cover Letter(s) | 2004-11-11 | PDF 16.8 KB |
| response to oet 15915 | Cover Letter(s) | 2004-11-11 | PDF 74.1 KB |
| correspondence summary | Cover Letter(s) | 2004-10-26 | PDF 59.6 KB |
| correspondence summary | Cover Letter(s) | 2004-10-26 | PDF 59.6 KB |
| reply to oet 15913 | Cover Letter(s) | 2004-10-26 | PDF 50.8 KB |
| request for confidentiality | Cover Letter(s) | 2004-10-26 | PDF 60.4 KB |
| response to oet 15911 | Cover Letter(s) | 2004-10-26 | PDF 52.7 KB |
| rf exposure | RF Exposure Info | 2004-10-26 | PDF 41.7 KB |
| schematics Metadata only | Schematics | PDF 174.7 KB | |
| operatioanl description WAB Metadata only | Operational Description | PDF 47 KB | |
| operational description CAP Metadata only | Operational Description | PDF 323.5 KB | |
| operational description WAB Metadata only | Operational Description | PDF 47 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 2.6 MB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 55.8 KB |
Application Information
| Application ID | DJCuqeZmNm2M516uU9RPLw== |
|---|---|
| Final Action Date | 2004-11-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011485547 |
| Model | CAP |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Access Point With Two 802.11abg WLAN Cards |
| Responsible Party | Mark Hassebrock, mhassebrock@Miltope.com , 303 473 0388 |
| Test Firm | Douglas Massey, Advanced Compliance Solutions, Inc., dmassey@acstestlab.com  , 770-831-8048 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Professional installation is required. This device is approved for use with the antenna(s) and minimum length of cable(s) as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DJCuqeZmNm2M516uU9RPLw== | 2004-11-11 | Class II permissive change or modification of presently authorized equipment |
| nsVz+Kd42xf+zde+5Os14w== | 2004-10-26 | Original Equipment |
| MQfRXr5Rrs4yq34iUGP4Cg== | 2004-10-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application nsVz+Kd42xf+zde+5Os14w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/26/2004 Application Dated: 10/26/2004 |
| Miltope Corporation |
| 3800 Richardson Road South |
| Hope Hull, AL 36043 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.347 |
| Power listed is conducted. Professional installation required. The antenna installation of this transmitter requires a coaxial cable of the type RG-58 with a minimum length of 6 feet as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nsVz+Kd42xf+zde+5Os14w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Miltope Corporation 3800 Richardson Road South Hope Hull, AL 36043 United States |
Date of Grant: 10/26/2004 Application Dated: 10/26/2004 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.347 |
| Power listed is conducted. Professional installation required. The antenna installation of this transmitter requires a coaxial cable of the type RG-58 with a minimum length of 6 feet as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/26/2004 Application Dated: 10/26/2004 |
| Miltope Corporation |
| 3800 Richardson Road South |
| Hope Hull, AL 36043 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.059 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.025 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MQfRXr5Rrs4yq34iUGP4Cg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Miltope Corporation 3800 Richardson Road South Hope Hull, AL 36043 United States |
Date of Grant: 10/26/2004 Application Dated: 10/26/2004 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.059 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.025 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/11/2004 Application Dated: 11/11/2004 |
| Miltope Corporation |
| 3800 Richardson Road South |
| Hope Hull, AL 36043 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.347 |
| Power listed is conducted. Professional installation is required. This device is approved for use with the antenna(s) and minimum length of cable(s) as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DJCuqeZmNm2M516uU9RPLw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Miltope Corporation 3800 Richardson Road South Hope Hull, AL 36043 United States |
Date of Grant: 11/11/2004 Application Dated: 11/11/2004 |
| Attention: Mark Hassebrock |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH5-CAP |
| Name of Grantee: | Miltope Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point With Two 802.11abg WLAN Cards |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.347 |
| Power listed is conducted. Professional installation is required. This device is approved for use with the antenna(s) and minimum length of cable(s) as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antennas or transmitters except as documented in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |