FCC ID SH6AN7002Q
WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module
by Raytac Corp.
Grantee Code: SH6 Product Code: AN7002Q
Latest application date: 2026-07-01
FCC ID Device Details
| FCC ID | SH6AN7002Q |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SH6 |
| Product Code | AN7002Q |
| Applicant Business | Raytac Corp. 🇹🇼 |
| Related Domains |  raytac.com |
| Equipment Class | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Test Firm | SGS Taiwan Ltd. Central RF Lab |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5845-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2026-07-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-25 |
| 2412-2462 MHz | Original Equipment | 2025-04-25 |
| 5180-5240 MHz | Original Equipment | 2025-04-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2025-10-21 | PDF 2 MB |
| Antenna Report _AN7002Q-P_Photo | Internal Photos | 2025-10-21 | PDF 453.2 KB |
| Antenna Report _AN7002Q_Photo | Internal Photos | 2025-10-21 | PDF 453.6 KB |
| Internal Photos | Internal Photos | 2025-10-21 | PDF 964.5 KB |
| External Photos | External Photos | 2025-10-21 | PDF 1.2 MB |
| ID Label/Location Info | ID Label/Location Info | 2025-04-25 | PDF 134.5 KB |
| SAR Test setup photo | Test Setup Photos | 2026-07-01 | PDF 746.6 KB |
| Test Setup Photos | Test Setup Photos | 2026-07-01 | PDF 288.7 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2026-02-10 | PDF 746.6 KB |
| Test Setup Photos_NII | Test Setup Photos | 2025-10-21 | PDF 1.2 MB |
| Test Setup Photos_SAR | Test Setup Photos | 2025-10-21 | PDF 731.9 KB |
| SAR Test Report | RF Exposure Info | 2026-07-01 | PDF 721 KB |
| Test Report | Test Report | 2026-07-01 | PDF 1.8 MB |
| Antenna Report_5.2 TE_2344655_001 | Test Report | 2025-08-25 | PDF 566.8 KB |
| Antenna Report_5.3 Antenova_SRF2W012_001 | Test Report | 2025-08-25 | PDF 3.3 MB |
| Test Report_SAR | RF Exposure Info | 2025-08-25 | PDF 2.2 MB |
| Test Report_SAR_Appendix B_DAE _ Probe Cal. Certificate | RF Exposure Info | 2025-08-25 | PDF 5.2 MB |
| Test Report_SAR_Appendix C_Phantom Description _ Dipole Cal. Certificate | RF Exposure Info | 2025-08-25 | PDF 2.5 MB |
| Test Report_SAR_Appendix D_DIpole Extended Calibration Verification | RF Exposure Info | 2025-08-25 | PDF 721 KB |
| Antenna Report _2344655_001 | Test Report | 2025-04-25 | PDF 566.8 KB |
| Antenna Report _ANTX100ETHAB24553_001 | Test Report | 2025-04-25 | PDF 1 MB |
| Antenna Report _SRE3W084_001 | Test Report | 2025-04-25 | PDF 2.8 MB |
| Antenna Report _SRF2W012_001 | Test Report | 2025-04-25 | PDF 3.3 MB |
| Antenna Report_AN7002Q | Test Report | 2025-04-25 | PDF 812.1 KB |
| Antenna Report_AN7002Q-P | Test Report | 2025-04-25 | PDF 812.1 KB |
| Test Report_DFS | Test Report | 2025-04-25 | PDF 1.2 MB |
| Test Report_DTS-1 | Test Report | 2025-04-25 | PDF 5.2 MB |
| Test Report_DTS-1_rev | Test Report | 2025-04-25 | PDF 5.5 MB |
| Test Report_DTS-2 | Test Report | 2025-04-25 | PDF 5.2 MB |
| Test Report_DTS-2_rev | Test Report | 2025-04-25 | PDF 5.2 MB |
| Test Report_DTS-3 | Test Report | 2025-04-25 | PDF 702.3 KB |
| Test Report_NII-1 | Test Report | 2025-04-25 | PDF 5.4 MB |
| Test Report_NII-1_rev | Test Report | 2025-04-25 | PDF 5.7 MB |
| Test Report_NII-2 | Test Report | 2025-04-25 | PDF 5.2 MB |
| Test Report_NII-2_rev | Test Report | 2025-04-25 | PDF 5.7 MB |
| Test Report_NII-3 | Test Report | 2025-04-25 | PDF 5 MB |
| Test Report_NII-3_rev | Test Report | 2025-04-25 | PDF 5.5 MB |
| Test Report_NII-4 | Test Report | 2025-04-25 | PDF 5.1 MB |
| Test Report_NII-4_rev | Test Report | 2025-04-25 | PDF 5.6 MB |
| Test Report_NII-5 | Test Report | 2025-04-25 | PDF 5.1 MB |
| Test Report_NII-5_rev | Test Report | 2025-04-25 | PDF 5.6 MB |
| Test Report_NII-6 | Test Report | 2025-04-25 | PDF 3.5 MB |
| Test Report_NII-6_rev | Test Report | 2025-04-25 | PDF 972.5 KB |
| Test Report_SAR | RF Exposure Info | 2025-04-25 | PDF 2.3 MB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2025-04-25 | PDF 1.2 MB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2025-04-25 | PDF 2.6 MB |
| Applicant cover letter | Attestation Statements | 2026-07-01 | PDF 117.5 KB |
| US Agent letter | Attestation Statements | 2026-07-01 | PDF 62.5 KB |
| Attestation Statements | Attestation Statements | 2025-08-25 | PDF 50.4 KB |
| US Agent Letter | Attestation Statements | 2025-08-25 | PDF 50.5 KB |
| Attestation Statements part 2.911_d__5__i_ and 2.911_d__5__ii_ filing | Attestation Statements | 2025-04-25 | PDF 50.4 KB |
| US Agent | Attestation Statements | 2025-04-25 | PDF 50.5 KB |
| C2PC cover letter | Cover Letter(s) | 2026-07-01 | PDF 41.2 KB |
| POA | Cover Letter(s) | 2026-07-01 | PDF 43.6 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2025-08-25 | PDF 53.3 KB |
| FCC_agent_auth_letter | Cover Letter(s) | 2025-08-25 | PDF 46.9 KB |
| confidentiality | Cover Letter(s) | 2025-08-25 | PDF 107 KB |
| Modula rApproval Request | Cover Letter(s) | 2025-04-25 | PDF 135 KB |
| Modular Approval Request | Cover Letter(s) | 2025-04-25 | PDF 135 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2025-04-25 | PDF 100.7 KB |
| Request for Supersede | Cover Letter(s) | 2025-04-25 | PDF 56.4 KB |
| UNII-4 Declaration | Cover Letter(s) | 2025-04-25 | PDF 46.1 KB |
| MPE | RF Exposure Info | 2025-08-25 | PDF 493.8 KB |
| RF Exposure Report | RF Exposure Info | 2025-04-25 | PDF 1.7 MB |
| Block Diagram Metadata only | Block Diagram | PDF 36.1 KB | |
| AN7002Q Module Schematic Metadata only | Schematics | PDF 74.3 KB | |
| AN7002Q-P Module Schematic Metadata only | Schematics | PDF 74.6 KB | |
| AN7002Q-U Module Schematic Metadata only | Schematics | PDF 73.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 487.3 KB | |
| Software Security Cover Letter Metadata only | Operational Description | PDF 320 KB |
Application Information
| Application ID | r8FObhofDqaw2GB/Z9zNOg== |
|---|---|
| Final Action Date | 2026-07-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011485083 |
| Model | AN7002Q |
| Frequency Range | 5845-5885 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Responsible Party | Lyon Liu, lyon@raytac.com , +886-2-32340208 |
| Non-Technical Contact | Mr Yuh-Liang Liu, Raytac Corporation, liuyuhliang@gmail.com  , (626) 217-3139 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com  , 886222993279 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| r8FObhofDqaw2GB/Z9zNOg== | 2026-07-01 | Class II permissive change or modification of presently authorized equipment |
| n+7/mzI8R2O4RZPc0LjFtg== | 2025-08-25 | Class II permissive change or modification of presently authorized equipment |
| cUryZq7LoZdmCoWKhBKzTw== | 2025-08-25 | Class II permissive change or modification of presently authorized equipment |
| H/99DBQPbm8wfEq8oqmVrw== | 2025-04-25 | Original Equipment |
| Ckj6pP0rWtWxXy945x5DOg== | 2025-04-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application r8FObhofDqaw2GB/Z9zNOg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 07/01/2026 Application Dated: 06/25/2026 |
| Raytac Corp. |
| 8F, No.788-1, Zhongzheng Rd., Zhonghe Dist., |
| New Taipei City,, 235 Taiwan |
| Attention: Lyon Liu , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH6AN7002Q |
| Name of Grantee: | Raytac Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.031 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.031 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.031 | ||
| CC | 15E | 5845.0 - 5885.0 | 0.103 |
| C2PC to reduce power via software change. C2PC: Model number AN7002Q-U with 2344655-1 and SRF2W012 antenna change from a mobile device to a portable device. Reduce WiFi output power via software and evaluate SAR. SAR has been evaluated at 5 mm. The highest reported SAR for body-worn transmission exposure condition is 1.18 W/kg. Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. AN7002Q-U is for mobile condition. AN7002Q and AN7002Q-P are for portable condition. The highest reported SAR for stand-alone transmission exposure conditions is 0.73 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application n+7/mzI8R2O4RZPc0LjFtg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/25/2025 Application Dated: 08/13/2025 |
| Raytac Corp. |
| 8F, No.788-1, Zhongzheng Rd., Zhonghe Dist., |
| New Taipei City,, 235 Taiwan |
| Attention: Lyon Liu , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH6AN7002Q |
| Name of Grantee: | Raytac Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.031 | |||
| 15E | 5260.0 - 5320.0 | 0.031 | |||
| 15E | 5500.0 - 5720.0 | 0.031 | |||
| 15E | 5745.0 - 5825.0 | 0.031 | |||
| 15E | 5845.0 - 5885.0 | 0.1 |
| C2PC: Model number AN7002Q-U with 2344655-1 and SRF2W012 antenna change from a mobile device to a portable device. Reduce WiFi output power via software and evaluate SAR. SAR has been evaluated at 5 mm. The highest reported SAR for body-worn transmission exposure condition is 1.18 W/kg. Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. AN7002Q-U is for mobile condition. AN7002Q and AN7002Q-P are for portable condition. The highest reported SAR for stand-alone transmission exposure conditions is 0.73 W/kg, respectively. CC: This device is certified pursuant to two different Part 15 rules sections. ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application H/99DBQPbm8wfEq8oqmVrw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/25/2025 Application Dated: 04/25/2025 |
| Raytac Corp. |
| 8F, No.788-1, Zhongzheng Rd., Zhonghe Dist., |
| New Taipei City,, 235 Taiwan |
| Attention: Lyon Liu , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH6AN7002Q |
| Name of Grantee: | Raytac Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.17 |
| Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. AN7002Q-U is for mobile condition. AN7002Q and AN7002Q-P are for portable condition. The highest reported SAR for stand-alone transmission exposure conditions is 0.93 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application cUryZq7LoZdmCoWKhBKzTw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/25/2025 Application Dated: 08/13/2025 |
| Raytac Corp. |
| 8F, No.788-1, Zhongzheng Rd., Zhonghe Dist., |
| New Taipei City,, 235 Taiwan |
| Attention: Lyon Liu , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH6AN7002Q |
| Name of Grantee: | Raytac Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.17 |
| C2PC: Model number AN7002Q-U with 2344655-1 and SRF2W012 antenna change from a mobile device to a portable device. Reduce WiFi output power via software and evaluate SAR. SAR has been evaluated at 5 mm. The highest reported SAR for body-worn transmission exposure condition is 1.14 W/kg. Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. AN7002Q-U is for mobile condition. AN7002Q and AN7002Q-P are for portable condition. The highest reported SAR for stand-alone transmission exposure conditions is 0.93 W/kg, respectively. CC: This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application Ckj6pP0rWtWxXy945x5DOg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/25/2025 Application Dated: 04/25/2025 |
| Raytac Corp. |
| 8F, No.788-1, Zhongzheng Rd., Zhonghe Dist., |
| New Taipei City,, 235 Taiwan |
| Attention: Lyon Liu , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SH6AN7002Q |
| Name of Grantee: | Raytac Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Low Energy & IEEE 802.11 a/b/g/n/ac/ax Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.031 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.031 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.031 | ||
| CC | 15E | 5845.0 - 5885.0 | 0.1 |
| Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. AN7002Q-U is for mobile condition. AN7002Q and AN7002Q-P are for portable condition. The highest reported SAR for stand-alone transmission exposure conditions is 0.73 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |