FCC ID SIFNANOLOCAVR0108
nanoLOC AVR Module
by Nanotron Technologies GmbH
Grantee Code: SIF Product Code: NANOLOCAVR0108
Latest application date: 2008-05-28
FCC ID Device Details
| FCC ID | SIFNANOLOCAVR0108 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SIF |
| Product Code | NANOLOCAVR0108 |
| Applicant Business | Nanotron Technologies GmbH 🇩🇪 |
| Related Domains | |
| Equipment Class | nanoLOC AVR Module |
| Test Firm | Eurofins Product Service GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2441.75 MHz | Original Equipment | 2008-05-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| UserMan | Users Manual | 2008-05-28 | PDF 1.4 MB |
| IntPho | Internal Photos | 2008-05-28 | PDF 291.8 KB |
| ExtPho | External Photos | 2008-05-28 | PDF 291.8 KB |
| Loc | ID Label/Location Info | 2008-05-28 | PDF 283.9 KB |
| Smpl | ID Label/Location Info | 2008-05-28 | PDF 178.8 KB |
| AntennaSpec | Operational Description | 2008-05-28 | PDF 364 KB |
| TSup | Test Setup Photos | 2008-05-28 | PDF 248.6 KB |
| TestRpt1 | Test Report | 2008-05-28 | PDF 381.4 KB |
| TestRpt2 | Test Report | 2008-05-28 | PDF 1.7 MB |
| AuthLetter | Cover Letter(s) | 2008-05-28 | PDF 71.7 KB |
| ConfiReq | Cover Letter(s) | 2008-05-28 | PDF 76.4 KB |
| ModAprLetter | Cover Letter(s) | 2008-05-28 | PDF 84.9 KB |
Application Information
| Application ID | 9yWbP9KabQfZ3PQ2G/jzZA== |
|---|---|
| Final Action Date | 2008-05-28 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011490190 |
| Model | NANOLOCAVR0108 |
| Frequency Range | 2441.75 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | nanoLOC AVR Module |
| Responsible Party | Dr. Frank Schlichting, Director Application Engineering, f.schlichting@nanotron.com |
| Technical Contact | Frank Schlichting, Nanotron Technologies GmbH, f.schlichting@nanotron.com |
| Non-Technical Contact | Frank Schlichting, Nanotron Technologies GmbH, f.schlichting@nanotron.com |
| Test Firm | Jorg Kusig, Eurofins Product Service GmbH, joergkusig@eurofins.de |
| TCB Email | tcb@ets-ps.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9yWbP9KabQfZ3PQ2G/jzZA== | 2008-05-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2441.75 MHz | 0.0013000 | 15C |
Grants
TCB Grant - Application 9yWbP9KabQfZ3PQ2G/jzZA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/28/2008 Application Dated: 05/28/2008 |
| Nanotron Technologies GmbH |
| Alt-Moabit 60 |
| Berlin, 10555 Germany |
| Attention: Dr. Frank Schlichting , Director Application Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SIFNANOLOCAVR0108 |
| Name of Grantee: | Nanotron Technologies GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | nanoLOC AVR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0013 |
| Power listed is conducted.This device is a Modular Approval to be used for portable and mobile applications. If the second manufacturer/installer markets a device that does not comply with the Grantees instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. The module is labled with its own FCC ID number. If the module is inside of an end product, the label will not be visible. In this case the end product will be labled exterior with "contains FCC ID: SIFNANOLOCAVR0108". If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: "Contains FCC certified transmitter module(s)" Any similar wording that expresses the same meaning may be used. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Collocation configurations require separate evaluation. |
| Single Modular |
EAS Grant - Application 9yWbP9KabQfZ3PQ2G/jzZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nanotron Technologies GmbH Alt-Moabit 60 Berlin, 10555 Germany |
Date of Grant: 05/28/2008 Application Dated: 05/28/2008 |
| Attention: Dr. Frank Schlichting , Director Application Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SIFNANOLOCAVR0108 |
| Name of Grantee: | Nanotron Technologies GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | nanoLOC AVR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0013 |
| Power listed is conducted.This device is a Modular Approval to be used for portable and mobile applications. If the second manufacturer/installer markets a device that does not comply with the Grantees instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. The module is labled with its own FCC ID number. If the module is inside of an end product, the label will not be visible. In this case the end product will be labled exterior with "contains FCC ID: SIFNANOLOCAVR0108". If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: "Contains FCC certified transmitter module(s)" Any similar wording that expresses the same meaning may be used. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Collocation configurations require separate evaluation. |
| Single Modular |
| Mail To: |