FCC ID SIT-KT570

FCC ID	SIT-KT570
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	SIT
Product Code	KT570
Applicant Business	KAISSEN TECHNOLOGY LLC 🇺🇸
Related Domains	kaissen.com
Equipment Class	MOBILE POS DEVICE
Test Firm	TA Technology (Shanghai) Co., Ltd.

Frequency Range	Application Purpose	Final Action Date
700.5-714.5 MHz	Original Equipment	2020-12-02
2402-2480 MHz	Original Equipment	2020-12-01
729-746 MHz	Original Equipment	2020-12-01
2412-2462 MHz	Original Equipment	2020-12-01
5180-5240 MHz	Original Equipment	2020-12-01

Document	Type	Available	File
User Manual	Users Manual	2020-12-02	PDF 194.3 KB
users manual	Users Manual	2020-12-01	PDF 194.3 KB
Internal Photos	Internal Photos	2020-12-02	PDF 4 MB
Internal photo	Internal Photos	2020-12-01	PDF 4 MB
internal photos	Internal Photos	2020-12-01	PDF 4 MB
External Photos	External Photos	2020-12-02	PDF 2.4 MB
External photo	External Photos	2020-12-01	PDF 2.4 MB
External photos	External Photos	2020-12-01	PDF 2.4 MB
label	ID Label/Location Info	2020-12-02	PDF 61.5 KB
Label	ID Label/Location Info	2020-12-01	PDF 61.5 KB
Test Setup Photos	Test Setup Photos	2020-12-02	PDF 177 KB
Test Setup Photos	Test Setup Photos	2020-12-01	PDF 295 KB
Test Setup Photos	Test Setup Photos	2020-12-01	PDF 289.5 KB
Test Setup Photos	Test Setup Photos	2020-12-01	PDF 279.6 KB
test setup photos	Test Setup Photos	2020-12-01	PDF 289.5 KB
Test Report part22	Test Report	2020-12-02	PDF 303.6 KB
Test Report part24	Test Report	2020-12-02	PDF 295.9 KB
Test Report part27	Test Report	2020-12-02	PDF 317.6 KB
test report	Test Report	2020-12-01	PDF 388.5 KB
test report	Test Report	2020-12-01	PDF 3.6 MB
test report	Test Report	2020-12-01	PDF 2.7 MB
test report	Test Report	2020-12-01	PDF 4.2 MB
Confidentiality Request	Cover Letter(s)	2020-12-02	PDF 28.5 KB
POA	Cover Letter(s)	2020-12-02	PDF 61 KB
confidentiality letter	Cover Letter(s)	2020-12-01	PDF 28.5 KB
RF Exposure	RF Exposure Info	2020-12-02	PDF 293.9 KB
Block Diagram Metadata only	Block Diagram		PDF 252.1 KB
block diagram Metadata only	Block Diagram		PDF 252.1 KB
Schematic Metadata only	Schematics		PDF 713.1 KB
Schematics Metadata only	Schematics		PDF 713.1 KB
Operatinal Description Metadata only	Operational Description		PDF 293.5 KB
Operational Description Metadata only	Operational Description		PDF 293.5 KB
Operational description Metadata only	Operational Description		PDF 293.5 KB
Software Security Metadata only	Operational Description		PDF 134.5 KB
Software Security Description Metadata only	Operational Description		PDF 134.5 KB
Software Security Operational Description Metadata only	Operational Description		PDF 134.5 KB
Part List Metadata only	Parts List/Tune Up Info		PDF 61.9 KB
Parts List Metadata only	Parts List/Tune Up Info		PDF 61.9 KB
tune-up procedure Metadata only	Parts List/Tune Up Info		PDF 38.6 KB

Application ID	3NYPt5fOCMGl6w56Pte1iQ==
Final Action Date	2020-12-02
Application Purpose	Original Equipment
Applicant FRN	0022539829
Model	KT570
Frequency Range	700.5-714.5 MHz
Equipment Class	PCB - PCS Licensed Transmitter
Device Description	MOBILE POS DEVICE
Responsible Party	RICARDO LACAU, ricardo.lacau@kaissen.com , 1-7862909795
Test Firm	Mr. Zhihui Liu, TA Technology (Shanghai) Co., Ltd., liuzhihui@ta-shanghai.com , 86-21-50791141
TCB Email	TEI@timcoengr.com
TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Does not apply
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power listed is ERP for part 22, part 27 below 1 GHz, EIRP for part 24 and part 27 above 1 GHz., respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 12; The maximum antenna gains: 2dBi for LTE Band 2; -1.5dBi for LTE Band 12; 1.2dBi for LTE Band 4.

Application ID	Date	Purpose
3NYPt5fOCMGl6w56Pte1iQ==	2020-12-02	Original Equipment
yJdiSuvqEvB25PeIW+SZzQ==	2020-12-01	Original Equipment
rnzUN3FANaz16bNtlrBoww==	2020-12-01	Original Equipment
f8cH1UUvEjNRfMkjK01RRg==	2020-12-01	Original Equipment
TWqfCPMg/SBshyz+x0CU0A==	2020-12-01	Original Equipment
2uQ30yrCL6zUNjvIE3CCSA==	2020-12-01	Original Equipment

Frequency	Output	Tolerance	Emission	Rules	Grant Notes
700.5-714.5 MHz	0.082	0.0015ppm	2M75G7D	27
700.5-714.5 MHz	0.076	0.0013ppm	2M76W7D	27
704-711 MHz	0.08	0.0015ppm	9M12G7D	27
704-711 MHz	0.068	0.0013ppm	9M12W7D	27
729-746 MHz				15B
869-894 MHz				15B
1712.4-1752.6 MHz	0.233	0.0075ppm	4M15F9W	27
1715-1750 MHz	0.27	0.0004ppm	9M08G7D	27
1715-1750 MHz	0.219	0.0002ppm	9M08W7D	27
1720-1745 MHz	0.2	0.0002ppm	18M5W7D	27
1720-1745 MHz	0.247	0.0004ppm	18M5G7D	27
1852.4-1907.6 MHz	0.29	0.0037ppm	4M15F9W	24E
1857.5-1902.5 MHz	0.29	0.0016ppm	13M6W7D	24E
1860-1900 MHz	0.323	0.0011ppm	18M6G7D	24E
1860-1900 MHz	0.278	0.0016ppm	18M6W7D	24E
2402-2480 MHz	0.0060000			15C	CC
2412-2462 MHz	0.0350000			15C	CC
5180-5240 MHz	0.03			15E	CC
5745-5825 MHz	0.019			15E	CC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Part 15 Class B Computing Device/Personal Computer
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Part 15 Class B Computing Device/Personal Computer
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

TCB Grant - Application TWqfCPMg/SBshyz+x0CU0A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Digital Transmission System
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.035

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3).

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Digital Transmission System
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.035

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3).

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rnzUN3FANaz16bNtlrBoww==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3).

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3).

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application f8cH1UUvEjNRfMkjK01RRg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Communications Rcvr for use w/ licensed Tx and CBs
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	869.0 - 894.0
	15B	729.0 - 746.0

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Communications Rcvr for use w/ licensed Tx and CBs
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	869.0 - 894.0
	15B	729.0 - 746.0

TCB Grant - Application 3NYPt5fOCMGl6w56Pte1iQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/02/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	PCS Licensed Transmitter
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	826.4 - 846.6	0.131	0.0076 PM	4M15F9W
	24E	1852.4 - 1907.6	0.29	0.0037 PM	4M15F9W
	24E	1860.0 - 1900.0	0.323	0.0011 PM	18M6G7D
	24E	1857.5 - 1902.5	0.29	0.0016 PM	13M6W7D
	24E	1860.0 - 1900.0	0.278	0.0016 PM	18M6W7D
	27	1712.4 - 1752.6	0.233	0.0075 PM	4M15F9W
	27	1715.0 - 1750.0	0.27	0.0004 PM	9M08G7D
	27	1720.0 - 1745.0	0.247	0.0004 PM	18M5G7D
	27	1715.0 - 1750.0	0.219	0.0002 PM	9M08W7D
	27	1720.0 - 1745.0	0.2	0.0002 PM	18M5W7D
	27	700.5 - 714.5	0.082	0.0015 PM	2M75G7D
	27	704.0 - 711.0	0.08	0.0015 PM	9M12G7D
	27	700.5 - 714.5	0.076	0.0013 PM	2M76W7D
	27	704.0 - 711.0	0.068	0.0013 PM	9M12W7D

Power listed is ERP for part 22, part 27 below 1 GHz, EIRP for part 24 and part 27 above 1 GHz., respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 12; The maximum antenna gains: 2dBi for LTE Band 2; -1.5dBi for LTE Band 12; 1.2dBi for LTE Band 4.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/02/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	PCS Licensed Transmitter
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	826.4 - 846.6	0.131	0.0076 PM	4M15F9W
	24E	1852.4 - 1907.6	0.29	0.0037 PM	4M15F9W
	24E	1860.0 - 1900.0	0.323	0.0011 PM	18M6G7D
	24E	1857.5 - 1902.5	0.29	0.0016 PM	13M6W7D
	24E	1860.0 - 1900.0	0.278	0.0016 PM	18M6W7D
	27	1712.4 - 1752.6	0.233	0.0075 PM	4M15F9W
	27	1715.0 - 1750.0	0.27	0.0004 PM	9M08G7D
	27	1720.0 - 1745.0	0.247	0.0004 PM	18M5G7D
	27	1715.0 - 1750.0	0.219	0.0002 PM	9M08W7D
	27	1720.0 - 1745.0	0.2	0.0002 PM	18M5W7D
	27	700.5 - 714.5	0.082	0.0015 PM	2M75G7D
	27	704.0 - 711.0	0.08	0.0015 PM	9M12G7D
	27	700.5 - 714.5	0.076	0.0013 PM	2M76W7D
	27	704.0 - 711.0	0.068	0.0013 PM	9M12W7D

Power listed is ERP for part 22, part 27 below 1 GHz, EIRP for part 24 and part 27 above 1 GHz., respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 12; The maximum antenna gains: 2dBi for LTE Band 2; -1.5dBi for LTE Band 12; 1.2dBi for LTE Band 4.

TCB Grant - Application 2uQ30yrCL6zUNjvIE3CCSA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

KAISSEN TECHNOLOGY LLC

7412 SW 48St.,SUITE B,

MIAMI, FL 33155

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	MOBILE POS DEVICE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.03
CC	15E	5745.0 - 5825.0	0.019

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports 20, 40, and 80 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KAISSEN TECHNOLOGY LLC
7412 SW 48St.,SUITE B,
MIAMI, FL 33155
United States

Date of Grant: 12/01/2020

Application Dated: 12/01/2020

Attention: RICARDO LACAU

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SIT-KT570

Name of Grantee:	KAISSEN TECHNOLOGY LLC

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	MOBILE POS DEVICE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.03
CC	15E	5745.0 - 5825.0	0.019

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports 20, 40, and 80 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

MOBILE POS DEVICE

by KAISSEN TECHNOLOGY LLC

Grantee Code: SIT Product Code: KT570

Latest application date: 2020-12-02

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application yJdiSuvqEvB25PeIW+SZzQ==

EAS Grant - Application yJdiSuvqEvB25PeIW+SZzQ==

TCB Grant - Application TWqfCPMg/SBshyz+x0CU0A==

EAS Grant - Application TWqfCPMg/SBshyz+x0CU0A==

TCB Grant - Application rnzUN3FANaz16bNtlrBoww==

EAS Grant - Application rnzUN3FANaz16bNtlrBoww==

TCB Grant - Application f8cH1UUvEjNRfMkjK01RRg==

EAS Grant - Application f8cH1UUvEjNRfMkjK01RRg==

TCB Grant - Application 3NYPt5fOCMGl6w56Pte1iQ==

EAS Grant - Application 3NYPt5fOCMGl6w56Pte1iQ==

TCB Grant - Application 2uQ30yrCL6zUNjvIE3CCSA==

EAS Grant - Application 2uQ30yrCL6zUNjvIE3CCSA==