FCC ID SIV-WVM1104RX

WVM1104-Rx (Wireless Video Module-Receiver)

by Adimos, Inc

Grantee Code: SIV   Product Code: WVM1104RX
Latest application date: 2005-05-18

FCC ID Device Details

FCC IDSIV-WVM1104RX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSIV
Product CodeWVM1104RX
Applicant BusinessAdimos, Inc 🇺🇸
Related Domains adimos.com adt.com.tw
Equipment ClassWVM1104-Rx (Wireless Video Module-Receiver)
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5150-5350 MHzChange in identification of presently authorized equipment. Original FCC ID: MXF-940307AR Grant Date: 04/25/20052005-05-18
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: MXF-940307AR Grant Date: 04/25/20052005-05-18

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2005-05-18PDF 468.1 KB
External PhotosExternal Photos2005-05-18PDF 718.9 KB
ID LabelID Label/Location Info2005-05-18PDF 154.2 KB
Declaration Letter from AdimosCover Letter(s)2005-05-18PDF 65.4 KB
Declaration Letter from GemtekCover Letter(s)2005-05-18PDF 59.1 KB

Application Information

Application IDZEpw4uaTsT35YR2qiecbSw==
Final Action Date2005-05-18
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: MXF-940307AR Grant Date: 04/25/2005
Applicant FRN0011365798
ModelWVM1104RX
Frequency Range5150-5350 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWVM1104-Rx (Wireless Video Module-Receiver)
Responsible PartyMalcolm Caraballo, VP, Operations, mal.caraballo@adimos.com , 1-510-651-8507
AgentStephanie Stephanie Stephanie, Advance Data Technology Corporation, stephanie@adt.com.tw , 886-3-3183232
Technical ContactCody Chang, Advance Data Technology Corporation, Cody@adt.com.tw , 886-3-3183232
Non-Technical ContactStephanie Hung, Advance Data Technology Corporation, stephanie@adt.com.tw , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailinfo@ckccertification.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. User installation is prohibited. Per 15.407(e) device is restricted to indoor use only for 5.15-5.25 GHz.

Applications

Application IDDatePurpose
ZEpw4uaTsT35YR2qiecbSw==2005-05-18Change in identification of presently authorized equipment. Original FCC ID: MXF-940307AR Grant Date: 04/25/2005
Mt09AivEPML+YZtNtMzV8Q==2005-05-18Change in identification of presently authorized equipment. Original FCC ID: MXF-940307AR Grant Date: 04/25/2005

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.06315CCC
5150-5350 MHz0.041000015ECC
5725-5850 MHz0.05115CCC

Grants

TCB Grant - Application ZEpw4uaTsT35YR2qiecbSw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 05/18/2005

Application Dated: 05/18/2005
Adimos, Inc
101 First St, #623
Los Altos, CA 94022
 
Attention: Malcolm Caraballo , VP, Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SIV-WVM1104RX
Name of Grantee:  Adimos, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WVM1104-Rx (Wireless Video Module-Receiver)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.041  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. User installation is prohibited. Per 15.407(e) device is restricted to indoor use only for 5.15-5.25 GHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZEpw4uaTsT35YR2qiecbSw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Adimos, Inc
101 First St, #623
Los Altos, CA 94022
United States
  Date of Grant: 05/18/2005

Application Dated: 05/18/2005
 
Attention: Malcolm Caraballo , VP, Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SIV-WVM1104RX
Name of Grantee:  Adimos, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WVM1104-Rx (Wireless Video Module-Receiver)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.041  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. User installation is prohibited. Per 15.407(e) device is restricted to indoor use only for 5.15-5.25 GHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Mt09AivEPML+YZtNtMzV8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 05/18/2005

Application Dated: 05/18/2005
Adimos, Inc
101 First St, #623
Los Altos, CA 94022
 
Attention: Malcolm Caraballo , VP, Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SIV-WVM1104RX
Name of Grantee:  Adimos, Inc
Equipment Class: Digital Transmission System
Notes: WVM1104-Rx (Wireless Video Module-Receiver)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.063  
CC 15C 5725.0  -  5850.0 0.051  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. User installation is prohibited.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Mt09AivEPML+YZtNtMzV8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Adimos, Inc
101 First St, #623
Los Altos, CA 94022
United States
  Date of Grant: 05/18/2005

Application Dated: 05/18/2005
 
Attention: Malcolm Caraballo , VP, Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SIV-WVM1104RX
Name of Grantee:  Adimos, Inc
Equipment Class: Digital Transmission System
Notes: WVM1104-Rx (Wireless Video Module-Receiver)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.063  
CC 15C 5725.0  -  5850.0 0.051  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. User installation is prohibited.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: