FCC ID SK6-XI-AC1300

Wireless Access Point

by Cambium Networks

Grantee Code: SK6   Product Code: XIAC1300
Latest application date: 2014-12-23

FCC ID Device Details

FCC IDSK6-XI-AC1300
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSK6
Product CodeXIAC1300
Applicant BusinessCambium Networks 🇺🇸
Related Domains cambiumnetworks.com
Equipment ClassWireless Access Point
Test FirmMiCOM Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2014-12-23
2412-2462 MHzOriginal Equipment2014-06-10
5180-5240 MHzOriginal Equipment2014-06-09

Exhibits

DocumentTypeAvailableFile
Part 1Users Manual2014-12-23PDF 3.2 MB
Part 2Users Manual2014-12-23PDF 4.3 MB
Part 1 DRAFTUsers Manual2014-06-10PDF 3.6 MB
Part 2 DRAFTUsers Manual2014-06-10PDF 4.7 MB
IntInternal Photos2014-06-10PDF 4.9 MB
ExtExternal Photos2014-12-23PDF 4.7 MB
Host PicsExternal Photos2014-06-10PDF 428 KB
HostExternal Photos2014-06-09PDF 428 KB
LabelID Label/Location Info2014-12-23PDF 257.6 KB
DrawingID Label/Location Info2014-06-10PDF 144.3 KB
LocationID Label/Location Info2014-06-10PDF 257.8 KB
SetupTest Setup Photos2014-12-23PDF 343.1 KB
Test SetupTest Setup Photos2014-06-10PDF 343.1 KB
Part 1Test Report2014-12-23PDF 5.7 MB
Part 2Test Report2014-12-23PDF 4.8 MB
Part 3Test Report2014-12-23PDF 3.7 MB
5150 - 5250Test Report2014-06-10PDF 3.8 MB
DTS Part 1Test Report2014-06-10PDF 5.5 MB
DTS Part 2Test Report2014-06-10PDF 3.7 MB
DTS Part 3Test Report2014-06-10PDF 2.9 MB
Part 1Test Report2014-06-10PDF 5.4 MB
Part 2Test Report2014-06-10PDF 3.7 MB
Part 3Test Report2014-06-10PDF 2.9 MB
NIITest Report2014-06-09PDF 3.9 MB
AuthorizationCover Letter(s)2014-12-23PDF 30.4 KB
Conformity StatementCover Letter(s)2014-12-23PDF 55.6 KB
DFS DeclarationCover Letter(s)2014-12-23PDF 57.7 KB
Non Transmission DeclarationCover Letter(s)2014-12-23PDF 54.9 KB
PCIII Change DeclarationCover Letter(s)2014-12-23PDF 55.5 KB
PCIII Change RequestCover Letter(s)2014-12-23PDF 55.4 KB
TDWR InstructionsCover Letter(s)2014-12-23PDF 233.8 KB
AuthorizationCover Letter(s)2014-06-10PDF 107.5 KB
ConfidCover Letter(s)2014-06-10PDF 144.9 KB
LMA RequestCover Letter(s)2014-06-10PDF 166 KB
RFxRF Exposure Info2014-12-23PDF 94.7 KB
RFxRF Exposure Info2014-06-10PDF 38.2 KB
MPERF Exposure Info2014-06-09PDF 38.2 KB
Block Metadata onlyBlock DiagramPDF 29.3 KB
Schema Metadata onlySchematicsPDF 369.3 KB
Ops Metadata onlyOperational DescriptionPDF 570.2 KB
SDR Security Descript r4 Metadata onlySDR Software/Security InfPDF 196.1 KB
SDR Security Description Metadata onlySDR Software/Security InfPDF 74.8 KB
SEDR Security Description r4 Metadata onlySDR Software/Security InfPDF 196.1 KB
Security Description Metadata onlySDR Software/Security InfPDF 79.1 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 46.3 KB

Application Information

Application IDp8AkUQA0b8bwP7KXyJpvjQ==
Final Action Date2014-12-23
Application PurposeClass III permissive change to software defined radio
Applicant FRN0016216152
ModelXI-AC1300
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartySteven M Payne, Principal Staff Engineer - RF, steve.payne@cambiumnetworks.com , 847-640-3615
Technical ContactBill Graff, MiCOM Labs, certification@micomlabs.com , (925)462-0304
Test FirmGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSoftware Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays

Applications

Application IDDatePurpose
p8AkUQA0b8bwP7KXyJpvjQ==2014-12-23Class III permissive change to software defined radio
Z5BELNnFEDot+cZQhPkRrQ==2014-06-10Original Equipment
+cs5yNSMqNMrnORsUzHs1w==2014-06-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.27515CCC, MO
2422-2462 MHz0.20315CCC, MO
5180-5240 MHz0.030315ECC, MO
5180-5240 MHz0.04915ECC, MO
5190-5230 MHz0.043715ECC, MO
5210 MHz0.04915ECC, MO
5260-5320 MHz0.20115ECC, MO
5500-5580 MHz0.23115ECC, MO
5660-5700 MHz0.23115ECC, MO
5745-5825 MHz0.18115CCC, MO
5755-5795 MHz0.15415CCC, MO
5775 MHz0.14515CCC, MO

Grants

TCB Grant - Application Z5BELNnFEDot+cZQhPkRrQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/10/2014

Application Dated: 06/03/2014
Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.275  
CC MO 15C 2422.0  -  2462.0 0.203  
CC MO 15C 5745.0  -  5825.0 0.181  
CC MO 15C 5755.0  -  5795.0 0.154  
CC MO 15C 5775.0  -  5775.0 0.145  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Z5BELNnFEDot+cZQhPkRrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
United States
  Date of Grant: 06/10/2014

Application Dated: 06/03/2014
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.275  
CC MO 15C 2422.0  -  2462.0 0.203  
CC MO 15C 5745.0  -  5825.0 0.181  
CC MO 15C 5755.0  -  5795.0 0.154  
CC MO 15C 5775.0  -  5775.0 0.145  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application p8AkUQA0b8bwP7KXyJpvjQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/23/2014

Application Dated: 10/22/2014
Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO 15E 5260.0  -  5320.0 0.201  
CC MO 15E 5500.0  -  5580.0 0.231  
CC MO 15E 5660.0  -  5700.0 0.231  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application p8AkUQA0b8bwP7KXyJpvjQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
United States
  Date of Grant: 12/23/2014

Application Dated: 10/22/2014
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO 15E 5260.0  -  5320.0 0.201  
CC MO 15E 5500.0  -  5580.0 0.231  
CC MO 15E 5660.0  -  5700.0 0.231  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application +cs5yNSMqNMrnORsUzHs1w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/09/2014

Application Dated: 06/03/2014
Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0303  
CC MO 15E 5190.0  -  5230.0 0.0437  
CC MO 15E 5210.0  -  5210.0 0.049  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application +cs5yNSMqNMrnORsUzHs1w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cambium Networks
3800 Golf Rd #360
Rolling Meadows, IL 60008
United States
  Date of Grant: 06/09/2014

Application Dated: 06/03/2014
 
Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK6-XI-AC1300
Name of Grantee:  Cambium Networks
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0303  
CC MO 15E 5190.0  -  5230.0 0.0437  
CC MO 15E 5210.0  -  5210.0 0.049  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. Professional installation is required as noted in the requirements described in the User’s Manual. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. Limited Modular Approval (LMA) limited exclusively to installation in the following: Xirrus XR series Host Arrays


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: