FCC ID SK6-XR2425H

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Riverbed Technology Inc. 680 Folsom Street San Francisco, CA 94107 United States

Date of Grant: 03/06/2014 Application Dated: 01/21/2014

Attention: Joseph Kwong , Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SK6-XR2425H
Name of Grantee:	Riverbed Technology Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11abgn (2x2) access point for outdoor installations
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5260.0  -  5320.0	0.031
	15E	5500.0  -  5580.0	0.019
	15E	5660.0  -  5700.0	0.026

This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21.6 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application fo9p3a3upEnarDr2X4DM+A==

EAS Grant - Application fo9p3a3upEnarDr2X4DM+A==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Riverbed Technology Inc. 680 Folsom Street San Francisco, CA 94107 United States

Date of Grant: 03/06/2014 Application Dated: 01/21/2014

Attention: Joseph Kwong , Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SK6-XR2425H
Name of Grantee:	Riverbed Technology Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11abgn (2x2) access point for outdoor installations
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.037
	15C	2412.0  -  2462.0	0.034
	15C	2422.0  -  2452.0	0.114
	15C	5745.0  -  5825.0	0.036
	15C	5745.0  -  5825.0	0.035
	15C	5755.0  -  5795.0	0.225

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21.6 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application 9cQ3Di+AQ7/6O4ChxAqLKQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/19/2016 Application Dated: 05/17/2016

Cambium Networks

3800 Golf Rd #360

Rolling Meadows, IL 60008

Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SK6-XR2425H
Name of Grantee:	Cambium Networks
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Hardened Wireless Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5260.0  -  5320.0	0.031
38 CC MO	15E	5500.0  -  5700.0	0.026
48 CC MO	15E	5745.0  -  5825.0	0.225

Class II Permissive Change. This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21.6 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
48:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cambium Networks 3800 Golf Rd #360 Rolling Meadows, IL 60008 United States

Date of Grant: 09/19/2016 Application Dated: 05/17/2016

Attention: Steven Payne , Principal Staff Engineer - RF

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SK6-XR2425H
Name of Grantee:	Cambium Networks
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Hardened Wireless Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5260.0  -  5320.0	0.031
38 CC MO	15E	5500.0  -  5700.0	0.026
48 CC MO	15E	5745.0  -  5825.0	0.225

Class II Permissive Change. This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21.6 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
48:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: