FCC ID SK9AMI-1A

CENTRON OpenWay Electricity Meter

by Itron, Inc.

Grantee Code: SK9   Product Code: AMI1A
Latest application date: 2011-07-29

FCC ID Device Details

FCC IDSK9AMI-1A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSK9
Product CodeAMI1A
Applicant BusinessItron, Inc. 🇺🇸
Related Domains itron.com
Equipment ClassCENTRON OpenWay Electricity Meter
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2011-07-29
902.25-927.75 MHzClass II permissive change or modification of presently authorized equipment2008-10-03
2405-2475 MHzOriginal Equipment2007-09-18
902.25-927.75 MHzOriginal Equipment2007-09-14

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2011-07-29PDF 1.3 MB
EXTERNAL PHOTOSExternal Photos2007-09-18PDF 462.2 KB
LABEL INFORMATIONID Label/Location Info2007-09-18PDF 235.9 KB
Test Setup PhotosTest Setup Photos2011-07-29PDF 1.1 MB
Test Setup PhotosTest Setup Photos2008-10-03PDF 241 KB
TEST SETUP PHOTOSTest Setup Photos2007-09-18PDF 702.2 KB
Test ReportTest Report2011-07-29PDF 76.7 KB
Test ReportTest Report2008-10-03PDF 345 KB
TEST REPORTTest Report2007-09-18PDF 308.5 KB
TEST REPORTTest Report2007-09-14PDF 331.1 KB
Agency AgreementCover Letter(s)2011-07-29PDF 27.6 KB
FCC Cover LetterCover Letter(s)2011-07-29PDF 17.3 KB
Agency AgreementCover Letter(s)2008-10-03PDF 26.1 KB
Cover LetterCover Letter(s)2008-10-03PDF 17.9 KB
CONFIDENTIALITY REQUESTCover Letter(s)2007-09-18PDF 26.2 KB
CUSTOMER REPLYCover Letter(s)2007-09-18PDF 17.6 KB
RF EXPOSURERF Exposure Info2007-09-18PDF 31.9 KB

Application Information

Application IDDPbBuMquNAv2Bn6gRlLWvQ==
Final Action Date2011-07-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006329973
ModelAMI-1A
Frequency Range902.25-927.75 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCENTRON OpenWay Electricity Meter
Responsible PartyLee Littlejohn, Compliance Engineer, Lee.Littlejohn@itron.com , 864-638-4761
AgentSam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770 831 8048
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change adds new antenna types as described in this filing.

Applications

Application IDDatePurpose
DPbBuMquNAv2Bn6gRlLWvQ==2011-07-29Class II permissive change or modification of presently authorized equipment
aNRRGXROS0zzcXFHSrhhWA==2008-10-03Class II permissive change or modification of presently authorized equipment
g2FX8ByDMKJ+01uXedhmZA==2007-09-18Original Equipment
T6FKPsYNYaK2wzdHC2fm/Q==2007-09-14Original Equipment

Equipment Authorization

FrequencyOutputRules
902.25-927.75 MHz0.156000015C
2405-2475 MHz0.074000015C

Grants

TCB Grant - Application T6FKPsYNYaK2wzdHC2fm/Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/14/2007

Application Dated: 09/13/2007
Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OPEN WAY ELECTRICITY METER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application T6FKPsYNYaK2wzdHC2fm/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 09/14/2007

Application Dated: 09/13/2007
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OPEN WAY ELECTRICITY METER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA296337

TCB Grant - Application g2FX8ByDMKJ+01uXedhmZA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/18/2007

Application Dated: 09/13/2007
Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Digital Transmission System
Notes: CENTRON OPEN WAY ELECTRICITY METER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.074  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application g2FX8ByDMKJ+01uXedhmZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 09/18/2007

Application Dated: 09/13/2007
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Digital Transmission System
Notes: CENTRON OPEN WAY ELECTRICITY METER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.074  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA993446

TCB Grant - Application DPbBuMquNAv2Bn6gRlLWvQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 07/29/2011

Application Dated: 07/29/2011
Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OpenWay Electricity Meter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change adds new antenna types as described in this filing.


EAS Grant - Application DPbBuMquNAv2Bn6gRlLWvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 07/29/2011

Application Dated: 07/29/2011
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OpenWay Electricity Meter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change adds new antenna types as described in this filing.



TCB Grant - Application aNRRGXROS0zzcXFHSrhhWA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/03/2008

Application Dated: 10/03/2008
Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OpenWay Electricity Meter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application aNRRGXROS0zzcXFHSrhhWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 10/03/2008

Application Dated: 10/03/2008
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9AMI-1A
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON OpenWay Electricity Meter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.156  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: