FCC ID SK9AMI7
AMI7 Module
by Itron, Inc.
Grantee Code: SK9 Product Code: AMI7
Latest application date: 2012-07-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.25-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2012-07-10 |
| 902.25-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-15 |
| 902.25-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-05 |
| 902.25-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2012-01-20 |
| 902.25-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2011-07-29 |
| 2405-2475 MHz | Original Equipment | 2011-05-06 |
| 902.25-927.75 MHz | Original Equipment | 2011-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2011-05-06 | PDF 84.3 KB |
| External Photos | External Photos | 2011-07-29 | PDF 811.1 KB |
| External Photos | External Photos | 2011-05-06 | PDF 17.4 KB |
| Label Information | ID Label/Location Info | 2011-05-06 | PDF 217.5 KB |
| Test Setup Photos | Test Setup Photos | 2012-07-10 | PDF 143.9 KB |
| Test Setup Photos | Test Setup Photos | 2012-06-15 | PDF 137.7 KB |
| Test Setup Photos | Test Setup Photos | 2012-06-05 | PDF 128.1 KB |
| Test Setup Photos | Test Setup Photos | 2012-01-20 | PDF 542.5 KB |
| Test Setup Photos | Test Setup Photos | 2011-07-29 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2011-05-06 | PDF 559.9 KB |
| Test Report | Test Report | 2012-07-10 | PDF 261.5 KB |
| Test Report | Test Report | 2012-06-15 | PDF 179.7 KB |
| Test Report | Test Report | 2012-06-05 | PDF 394.7 KB |
| Test Report | Test Report | 2012-01-20 | PDF 296.3 KB |
| Test Report | Test Report | 2011-07-29 | PDF 81.2 KB |
| Test Report DSS | Test Report | 2011-05-06 | PDF 937.2 KB |
| Test Report DTS | Test Report | 2011-05-06 | PDF 436.7 KB |
| Agency Agreement | Cover Letter(s) | 2012-07-10 | PDF 20 KB |
| Confidentiality Request | Cover Letter(s) | 2012-07-10 | PDF 21.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-07-10 | PDF 12.3 KB |
| NDA Letter | Cover Letter(s) | 2012-07-10 | PDF 152 KB |
| Agency Agreement | Cover Letter(s) | 2012-06-15 | PDF 19 KB |
| Confidentiality Request | Cover Letter(s) | 2012-06-15 | PDF 21.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-06-15 | PDF 38.7 KB |
| NDA Letter | Cover Letter(s) | 2012-06-15 | PDF 152 KB |
| Agency Agreement | Cover Letter(s) | 2012-06-05 | PDF 19 KB |
| Confidentiality Request | Cover Letter(s) | 2012-06-05 | PDF 21.1 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-06-05 | PDF 39.1 KB |
| Agency Agreement | Cover Letter(s) | 2012-01-20 | PDF 27.6 KB |
| Confidentiality Request | Cover Letter(s) | 2012-01-20 | PDF 27.8 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-01-20 | PDF 17.4 KB |
| Agency Agreement | Cover Letter(s) | 2011-07-29 | PDF 27.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-07-29 | PDF 17.4 KB |
| Agency Agreement | Cover Letter(s) | 2011-05-06 | PDF 27.6 KB |
| Confidentiality Request | Cover Letter(s) | 2011-05-06 | PDF 28.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-05-06 | PDF 17.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2011-05-06 | PDF 27.1 KB |
| NDA Letter | Cover Letter(s) | 2011-05-06 | PDF 145.9 KB |
| RF Exposure | RF Exposure Info | 2012-07-10 | PDF 31.9 KB |
| RF Exposure | RF Exposure Info | 2012-01-20 | PDF 27.6 KB |
| RF Exposure | RF Exposure Info | 2011-05-06 | PDF 27.1 KB |
Application Information
| Application ID | 1iVdk1Vq68zN3+vsDeZRKw== |
|---|---|
| Final Action Date | 2012-07-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006329973 |
| Model | AMI7 |
| Frequency Range | 902.25-927.75 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | AMI7 Module |
| Responsible Party | Lee Littlejohn, Compliance Engineer, Lee.Littlejohn@itron.com  , 864-638-4761 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770) 831-8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add RF filter and new antenna type to specific meter host as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1iVdk1Vq68zN3+vsDeZRKw== | 2012-07-10 | Class II permissive change or modification of presently authorized equipment |
| 09OJ3GQ5/k0Qr587TKWlQA== | 2012-06-15 | Class II permissive change or modification of presently authorized equipment |
| lqhemnoRX5JvRM0dVjyrXA== | 2012-06-05 | Class II permissive change or modification of presently authorized equipment |
| 3ew+acbhXZD9hKWfiascpw== | 2012-01-20 | Class II permissive change or modification of presently authorized equipment |
| UWUq2WTJ2uKBFubVk5byHQ== | 2011-07-29 | Class II permissive change or modification of presently authorized equipment |
| f6/h0x8F9QDKwVuZtX6Gdw== | 2011-05-06 | Original Equipment |
| 65EBTxdE4RgB/RIXsGsPWw== | 2011-05-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application UWUq2WTJ2uKBFubVk5byHQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 07/29/2011 Application Dated: 07/29/2011 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change adds new antenna types as described in this filing. |
EAS Grant - Application UWUq2WTJ2uKBFubVk5byHQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 07/29/2011 Application Dated: 07/29/2011 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change adds new antenna types as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 06/05/2012 Application Dated: 06/05/2012 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new mode of operation as described in this filing. |
EAS Grant - Application lqhemnoRX5JvRM0dVjyrXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 06/05/2012 Application Dated: 06/05/2012 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new mode of operation as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 05/06/2011 Application Dated: 05/05/2011 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.065 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must transmit with a source-based-time-averaged duty cycle not to exceed 27%. |
EAS Grant - Application f6/h0x8F9QDKwVuZtX6Gdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 05/06/2011 Application Dated: 05/05/2011 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.065 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must transmit with a source-based-time-averaged duty cycle not to exceed 27%. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 05/06/2011 Application Dated: 05/05/2011 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application 65EBTxdE4RgB/RIXsGsPWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 05/06/2011 Application Dated: 05/05/2011 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 01/20/2012 Application Dated: 01/18/2012 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 | |||
| 15C | 902.4 - 927.6 | 0.701 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new mode of operation as described in this filing. |
EAS Grant - Application 3ew+acbhXZD9hKWfiascpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 01/20/2012 Application Dated: 01/18/2012 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 | |||
| 15C | 902.4 - 927.6 | 0.701 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new mode of operation as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 07/10/2012 Application Dated: 07/10/2012 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add RF filter and new antenna type to specific meter host as described in this filing. |
EAS Grant - Application 1iVdk1Vq68zN3+vsDeZRKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 07/10/2012 Application Dated: 07/10/2012 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add RF filter and new antenna type to specific meter host as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Itron Electricity Metering, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add RF filter and new antenna type as described in this filing. |
EAS Grant - Application 09OJ3GQ5/k0Qr587TKWlQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron Electricity Metering, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Attention: Lee Littlejohn , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9AMI7 |
| Name of Grantee: | Itron Electricity Metering, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMI7 Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.701 | |||
| 15C | 902.25 - 927.75 | 0.684 | |||
| 15C | 909.6 - 921.8 | 0.689 |
| Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add RF filter and new antenna type as described in this filing. |
| Mail To: |