FCC ID SK9C1A-3

CENTRON ELECTRICITY METER

by Itron, Inc.

Grantee Code: SK9   Product Code: C1A3
Latest application date: 2008-05-12

FCC ID Device Details

FCC IDSK9C1A-3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSK9
Product CodeC1A3
Applicant BusinessItron, Inc. 🇺🇸
Related Domains itron.com
Equipment ClassCENTRON ELECTRICITY METER
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
909-922 MHzClass II permissive change or modification of presently authorized equipment2008-05-12
909-922 MHzOriginal Equipment2005-04-08

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2005-04-08PDF 2.6 MB
INTERNAL PHOTOSInternal Photos2005-04-08PDF 929.4 KB
EXTERNAL PHOTOSExternal Photos2005-04-08PDF 405.9 KB
ID LABELID Label/Location Info2005-04-08PDF 116.5 KB
TEST SETUP PHOTOSTest Setup Photos2005-04-08PDF 417.2 KB
TEST REPORTTest Report2008-05-12PDF 304.5 KB
TEST REPORTTest Report2005-04-08PDF 240.5 KB
AGENCY AGREEMENTCover Letter(s)2008-05-12PDF 29.9 KB
CONFIDENTIAL LETTERCover Letter(s)2008-05-12PDF 29.8 KB
COVER LETTERCover Letter(s)2008-05-12PDF 19 KB
CONFIDENTIALITY LETTERCover Letter(s)2005-04-08PDF 25.8 KB
RF EXPOSURERF Exposure Info2005-04-08PDF 30.8 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 29.9 KB
SCHEMATICS Metadata onlySchematicsPDF 330.5 KB
OPERATIONAL DESCRIPTION Metadata onlyOperational DescriptionPDF 572 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 69.9 KB

Application Information

Application IDBC+SqU6QJNR9swyhjypWHw==
Final Action Date2008-05-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006329973
ModelC1A-3
Frequency Range909-922 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCENTRON ELECTRICITY METER
Responsible PartyLee Littlejohn, Compliance Engineer, Lee.Littlejohn@itron.com , 864-638-4761
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
BC+SqU6QJNR9swyhjypWHw==2008-05-12Class II permissive change or modification of presently authorized equipment
GmgJyWEVujAvsk5KDpi/Wg==2005-04-08Original Equipment

Equipment Authorization

FrequencyOutputRules
909-922 MHz0.147000015C

Grants

TCB Grant - Application GmgJyWEVujAvsk5KDpi/Wg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/08/2005

Application Dated: 04/08/2005
Itron, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Christopher O'Steen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9C1A-3
Name of Grantee:  Itron, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ELECTRICITY METER WITH FHSS TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 909.0  -  922.0 0.147  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application GmgJyWEVujAvsk5KDpi/Wg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 04/08/2005

Application Dated: 04/08/2005
 
Attention: Christopher O'Steen , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9C1A-3
Name of Grantee:  Itron, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ELECTRICITY METER WITH FHSS TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 909.0  -  922.0 0.147  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application BC+SqU6QJNR9swyhjypWHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/12/2008

Application Dated: 05/12/2008
Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9C1A-3
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON ELECTRICITY METER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 909.0  -  922.0 0.147  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application BC+SqU6QJNR9swyhjypWHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron Electricity Metering, Inc.
313 North Highway 11
West Union, SC 29696
United States
  Date of Grant: 05/12/2008

Application Dated: 05/12/2008
 
Attention: Lee Littlejohn , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SK9C1A-3
Name of Grantee:  Itron Electricity Metering, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CENTRON ELECTRICITY METER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 909.0  -  922.0 0.147  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: