FCC ID SK9SNIC1
Smart Network Interface Card Module
by Itron, Inc.
Grantee Code: SK9 Product Code: SNIC1
Latest application date: 2020-08-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2020-08-20 |
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2018-02-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-02-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-01-04 |
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2018-01-04 |
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2017-10-09 |
| 902.4-927.6 MHz | Original Equipment | 2017-07-12 |
| 2412-2462 MHz | Original Equipment | 2017-07-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2018-02-27 | PDF 1.1 MB |
| Manual | Users Manual | 2018-01-04 | PDF 1 MB |
| Manual | Users Manual | 2017-07-12 | PDF 432.6 KB |
| Internal Photos | Internal Photos | 2018-02-27 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2018-01-04 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2017-07-12 | PDF 545.5 KB |
| External Photos | External Photos | 2018-02-27 | PDF 3.1 MB |
| External Photos | External Photos | 2018-01-04 | PDF 2.5 MB |
| External Photos | External Photos | 2017-07-12 | PDF 545.5 KB |
| Label Information | ID Label/Location Info | 2017-07-12 | PDF 171.9 KB |
| Test Setup Photos | Test Setup Photos | 2018-02-27 | PDF 1.6 MB |
| Test Setup Photos | Test Setup Photos | 2018-01-04 | PDF 1.6 MB |
| Test Setup Photos | Test Setup Photos | 2017-10-09 | PDF 1.4 MB |
| Test Setup Photos | Test Setup Photos | 2017-07-12 | PDF 549.4 KB |
| Test Report | Test Report | 2020-08-20 | PDF 3.6 MB |
| Test Report | Test Report | 2018-02-27 | PDF 608.5 KB |
| Test Report | Test Report | 2018-02-27 | PDF 606.1 KB |
| Test Report - Hybrid | Test Report | 2018-02-27 | PDF 599.3 KB |
| Test Report | Test Report | 2018-01-04 | PDF 616.3 KB |
| Test Report | Test Report | 2018-01-04 | PDF 613.6 KB |
| Test Report - Hybrid | Test Report | 2018-01-04 | PDF 606.8 KB |
| Test Report | Test Report | 2017-10-09 | PDF 1.3 MB |
| Test Report | Test Report | 2017-07-12 | PDF 2.5 MB |
| Test Report - Hopper | Test Report | 2017-07-12 | PDF 3.1 MB |
| Test Report - Hybrid | Test Report | 2017-07-12 | PDF 884.6 KB |
| Confidentiality Request | Cover Letter(s) | 2020-08-20 | PDF 61.5 KB |
| PCII Letter | Cover Letter(s) | 2020-08-20 | PDF 60.1 KB |
| Agency Agreement Letter | Cover Letter(s) | 2018-02-27 | PDF 141.6 KB |
| Confidentiality Request | Cover Letter(s) | 2018-02-27 | PDF 130.3 KB |
| FCC Cover Letter | Cover Letter(s) | 2018-02-27 | PDF 51.7 KB |
| Agency Agreement Letter | Cover Letter(s) | 2018-01-04 | PDF 141.4 KB |
| Confidentiality Request | Cover Letter(s) | 2018-01-04 | PDF 129.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2018-01-04 | PDF 51.7 KB |
| Agency Agreement | Cover Letter(s) | 2017-10-09 | PDF 140.5 KB |
| Confidentiality Request | Cover Letter(s) | 2017-10-09 | PDF 130.2 KB |
| FCC Cover Letter | Cover Letter(s) | 2017-10-09 | PDF 51.3 KB |
| Agency Agreement Letter | Cover Letter(s) | 2017-07-12 | PDF 141.3 KB |
| Confidentiality Request | Cover Letter(s) | 2017-07-12 | PDF 129.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2017-07-12 | PDF 53.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-07-12 | PDF 129.8 KB |
| RF Exposure | RF Exposure Info | 2018-02-27 | PDF 576 KB |
| MPE Report | RF Exposure Info | 2018-01-04 | PDF 584.1 KB |
| MPE Report | RF Exposure Info | 2017-07-12 | PDF 275.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 803.7 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 251.8 KB | |
| Schematics Metadata only | Schematics | PDF 599.4 KB | |
| Schematics Metadata only | Schematics | PDF 634.2 KB | |
| Schematics Metadata only | Schematics | PDF 1.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 1.6 MB | |
| Theory of Operation Metadata only | Operational Description | PDF 1.8 MB | |
| Theory of Operation Metadata only | Operational Description | PDF 758.9 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 704 KB | |
| Theory of Operations Metadata only | Operational Description | PDF 1.8 MB |
Application Information
| Application ID | qYiGfW2e7d7WeML17Sx+BA== |
|---|---|
| Final Action Date | 2020-08-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006329973 |
| Model | SNIC1 |
| Frequency Range | 902.2-927.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Smart Network Interface Card Module |
| Responsible Party | Christopher O'Steen, Compliance Engineer, Christopher.O'Steen@itron.com  , 864-718-6702 |
| Technical Contact | James Anselmo, Itron, Inc., James.Anselmo@itron.com , 509-891-3408 |
| Non-Technical Contact | Jay Holcomb, Itron, Inc., jay.holcomb@itron.com , 5098913281 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., qa@ckc.com  , 209-966-5240 |
| TCB Email | tcbinfo@ckc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must be professionally installed. C2PC to add host-specific configuration with modulation/data rate as listed in this filing. Additional Class II permissive change is required to authorize added modulation/data rate with additional hosts. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qYiGfW2e7d7WeML17Sx+BA== | 2020-08-20 | Class II permissive change or modification of presently authorized equipment |
| MoazwwQYVHB6V7qtM82LNA== | 2018-02-27 | Class II permissive change or modification of presently authorized equipment |
| KzBxNe7HxujKDylnVsFtVQ== | 2018-02-27 | Class II permissive change or modification of presently authorized equipment |
| mbVOe2ntWHO0RrT7s9WKaQ== | 2018-01-04 | Class II permissive change or modification of presently authorized equipment |
| 2SyPnlA62YD3io5ow5G5vQ== | 2018-01-04 | Class II permissive change or modification of presently authorized equipment |
| bR/H6KObHITtmrSIHRuUNw== | 2017-10-09 | Class II permissive change or modification of presently authorized equipment |
| F6l72zAS4nE6rkABuLTbWw== | 2017-07-12 | Original Equipment |
| 18GJE3MWfwg+OG6EbdbK3g== | 2017-07-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qYiGfW2e7d7WeML17Sx+BA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 08/20/2020 Application Dated: 08/19/2020 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 | |||
| 15C | 902.2 - 927.8 | 0.85 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must be professionally installed. C2PC to add host-specific configuration with modulation/data rate as listed in this filing. Additional Class II permissive change is required to authorize added modulation/data rate with additional hosts. |
EAS Grant - Application qYiGfW2e7d7WeML17Sx+BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 08/20/2020 Application Dated: 08/19/2020 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 | |||
| 15C | 902.2 - 927.8 | 0.85 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must be professionally installed. C2PC to add host-specific configuration with modulation/data rate as listed in this filing. Additional Class II permissive change is required to authorize added modulation/data rate with additional hosts. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host configuration as described in this filing. Device must be professionally installed. |
EAS Grant - Application MoazwwQYVHB6V7qtM82LNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host configuration as described in this filing. Device must be professionally installed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/04/2018 Application Dated: 01/04/2018 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II change to add new antenna/host combination configuration as described in this filing. |
EAS Grant - Application mbVOe2ntWHO0RrT7s9WKaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 01/04/2018 Application Dated: 01/04/2018 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II change to add new antenna/host combination configuration as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host configuration as described in this filing. Device must be professionally installed. |
EAS Grant - Application KzBxNe7HxujKDylnVsFtVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host configuration as described in this filing. Device must be professionally installed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/12/2017 Application Dated: 07/12/2017 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application F6l72zAS4nE6rkABuLTbWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 07/12/2017 Application Dated: 07/12/2017 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 10/09/2017 Application Dated: 10/09/2017 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new data rate as described in this filing. |
EAS Grant - Application bR/H6KObHITtmrSIHRuUNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 10/09/2017 Application Dated: 10/09/2017 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new data rate as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/04/2018 Application Dated: 01/04/2018 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host combination configuration as described in this filing. |
EAS Grant - Application 2SyPnlA62YD3io5ow5G5vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 01/04/2018 Application Dated: 01/04/2018 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.9 | |||
| 15C | 902.4 - 927.6 | 0.91 | |||
| 15C | 902.8 - 926.8 | 0.99 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Change to add new antenna/host combination configuration as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/12/2017 Application Dated: 07/12/2017 |
| Itron, Inc. |
| 313 North Highway 11 |
| West Union, SC 29696 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application 18GJE3MWfwg+OG6EbdbK3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 313 North Highway 11 West Union, SC 29696 United States |
Date of Grant: 07/12/2017 Application Dated: 07/12/2017 |
| Attention: Christopher O'Steen , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SK9SNIC1 |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Network Interface Card Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.013 | |||
| 15C | 2422.0 - 2452.0 | 0.002 |
| Modular Approval. Power listed is conducted. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: |