FCC ID SM6-UGM-H
Spread Spectrum Transmitter
by Mueller Systems, LLC
Grantee Code: SM6 Product Code: UGMH
Latest application date: 2011-05-30
FCC ID Device Details
| FCC ID | SM6-UGM-H |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SM6 |
| Product Code | UGMH |
| Applicant Business | Mueller Systems, LLC 🇺🇸 |
| Related Domains |  muellerwp.com |
| Equipment Class | Spread Spectrum Transmitter |
| Test Firm | Washington Laboratories, Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-927 MHz | Class II permissive change or modification of presently authorized equipment | 2011-05-30 |
| 902.5-927 MHz | Original Equipment | 2008-12-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2008-12-16 | PDF 93.4 KB |
| New Internal Photos | Internal Photos | 2011-05-30 | PDF 1.3 MB |
| Original Internal Photos | Internal Photos | 2011-05-30 | PDF 354.9 KB |
| Internal photos | Internal Photos | 2008-12-16 | PDF 225.2 KB |
| External photos | External Photos | 2008-12-16 | PDF 214.9 KB |
| Label | ID Label/Location Info | 2008-12-16 | PDF 48.5 KB |
| Label location | ID Label/Location Info | 2008-12-16 | PDF 579.1 KB |
| Block diagram | Block Diagram | 2008-12-16 | PDF 12.9 KB |
| Test Setup Photos | Test Setup Photos | 2011-05-30 | PDF 263.4 KB |
| Test photos | Test Setup Photos | 2008-12-16 | PDF 506.8 KB |
| Test Report | Test Report | 2011-05-30 | PDF 3.7 MB |
| Test report | Test Report | 2008-12-16 | PDF 4 MB |
| Modular request | Cover Letter(s) | 2008-12-16 | PDF 57.4 KB |
| Authorization Letter | Cover Letter(s) | 2011-05-30 | PDF 49.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-05-30 | PDF 290.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-05-30 | PDF 51.5 KB |
| Authorisation | Cover Letter(s) | 2008-12-16 | PDF 32.2 KB |
| Confidentiality | Cover Letter(s) | 2008-12-16 | PDF 59.4 KB |
| TCB comments | Cover Letter(s) | 2008-12-16 | PDF 44.6 KB |
| MPE Report | RF Exposure Info | 2008-12-16 | PDF 90.2 KB |
Application Information
| Application ID | 6S19affz2LCsUJM0pF0H8Q== |
|---|---|
| Final Action Date | 2011-05-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018474171 |
| Model | -UGM-H |
| Frequency Range | 902.5-927 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Spread Spectrum Transmitter |
| Responsible Party | Robert P Keefe, Senior Vice President Chief Information Officer, rkeefe@muellerwp.com , 770-206-4256 |
| Technical Contact | Steve Koster, Washington Labs, cert@wll.com  , 301-216-1500 |
| Test Firm | John Repella, Washington Laboratories, Ltd., johnr@wll.com , 301-216-1500 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and installers. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 6S19affz2LCsUJM0pF0H8Q== | 2011-05-30 | Class II permissive change or modification of presently authorized equipment |
| rSpicVY4bJo/Ojy7aMpnCQ== | 2008-12-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.5-927 MHz | 0.8130000 | 15C |
Grants
TCB Grant - Application rSpicVY4bJo/Ojy7aMpnCQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/16/2008 Application Dated: 12/16/2008 |
| Mueller Systems, LLC |
| 1200 Abernathy Road, NE |
| Suite 1200 |
| Atlanta, GA 30328 |
| Attention: Robert Keefe , Senior Vice President Chief Information Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SM6-UGM-H |
| Name of Grantee: | Mueller Systems, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.813 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and installers. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application rSpicVY4bJo/Ojy7aMpnCQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Mueller Systems, LLC 1200 Abernathy Road, NE Suite 1200 Atlanta, GA 30328 United States |
Date of Grant: 12/16/2008 Application Dated: 12/16/2008 |
| Attention: Robert Keefe , Senior Vice President Chief Information Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SM6-UGM-H |
| Name of Grantee: | Mueller Systems, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.813 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and installers. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/30/2011 Application Dated: 05/27/2011 |
| Mueller Systems, LLC |
| 1200 Abernathy Road, NE |
| Suite 1200 |
| Atlanta, GA 30328 |
| Attention: Robert Keefe , Senior Vice President Chief Information Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SM6-UGM-H |
| Name of Grantee: | Mueller Systems, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.813 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and installers. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 6S19affz2LCsUJM0pF0H8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Mueller Systems, LLC 1200 Abernathy Road, NE Suite 1200 Atlanta, GA 30328 United States |
Date of Grant: 05/30/2011 Application Dated: 05/27/2011 |
| Attention: Robert Keefe , Senior Vice President Chief Information Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SM6-UGM-H |
| Name of Grantee: | Mueller Systems, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.813 |
| Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and installers. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |