FCC ID SMJ-AK7

Thin Client

by NComputing Co., Ltd

Grantee Code: SMJ   Product Code: AK7
Latest application date: 2022-05-17

FCC ID Device Details

FCC IDSMJ-AK7
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSMJ
Product CodeAK7
Applicant BusinessNComputing Co., Ltd 🇰🇷
Related Domains ncomputing.com
Equipment ClassThin Client
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-05-17
2412-2462 MHzOriginal Equipment2022-05-16
2402-2480 MHzOriginal Equipment2022-05-16

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2022-05-17PDF 5.1 MB
User ManualUsers Manual2022-05-16PDF 5.1 MB
Internal PhotoInternal Photos2022-05-17PDF 1 MB
Internal PhotosInternal Photos2022-05-16PDF 1 MB
External photosExternal Photos2022-05-17PDF 865.1 KB
External PhotoExternal Photos2022-05-16PDF 865.1 KB
External PhotosExternal Photos2022-05-16PDF 865.1 KB
Label and locationID Label/Location Info2022-05-17PDF 342 KB
LabelID Label/Location Info2022-05-16PDF 342 KB
Test setup photoTest Setup Photos2022-05-17PDF 499.8 KB
Test Setup PhotosTest Setup Photos2022-05-16PDF 499.8 KB
Test ReportTest Report2022-05-17PDF 4.9 MB
Test ReportTest Report2022-05-16PDF 5.4 MB
Test ReportTest Report2022-05-16PDF 3.3 MB
Agent Authorization Rev 1.0Cover Letter(s)2022-05-17PDF 18.4 KB
Declaration Letter of Model DifferenceCover Letter(s)2022-05-17PDF 19 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-05-17PDF 71.2 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-05-17PDF 67.4 KB
FCC_Short Long Term Confidentiality RequestCover Letter(s)2022-05-16PDF 71.2 KB
RFExposureRF Exposure Info2022-05-17PDF 409.5 KB
BLOCK Metadata onlyBlock DiagramPDF 131.4 KB
BlockDiagram Metadata onlyBlock DiagramPDF 131.4 KB
SCH Metadata onlySchematicsPDF 557.7 KB
OP Metadata onlyOperational DescriptionPDF 232.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 232.4 KB
SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security InfPDF 139.1 KB

Application Information

Application IDqv9vjdh594tFQBwczLPfiA==
Final Action Date2022-05-17
Application PurposeOriginal Equipment
Applicant FRN0011650959
ModelAK7
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionThin Client
Responsible PartyChang Yu, engineering director, chang@ncomputing.com , +82-2-2028-7020
Technical ContactNComputing Co., Ltd, thomas@ncomputing.com
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qv9vjdh594tFQBwczLPfiA==2022-05-17Original Equipment
yrnUhPIb2de2ioygcr5hoQ==2022-05-16Original Equipment
8/nT7mdNHCaxLpyiDe/fVg==2022-05-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001800015CCC
2402-2480 MHz0.001615CCC
2412-2462 MHz0.027215CCC
5180-5240 MHz0.014300015ECC

Grants

TCB Grant - Application yrnUhPIb2de2ioygcr5hoQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/16/2022

Application Dated: 05/16/2022
NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186
Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Digital Transmission System
Notes: Thin Client
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC 15C 2412.0  -  2462.0 0.0272  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yrnUhPIb2de2ioygcr5hoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186 Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
  Date of Grant: 05/16/2022

Application Dated: 05/16/2022
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Digital Transmission System
Notes: Thin Client
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC 15C 2412.0  -  2462.0 0.0272  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qv9vjdh594tFQBwczLPfiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/17/2022

Application Dated: 05/17/2022
NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186
Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Thin Client
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0143  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qv9vjdh594tFQBwczLPfiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186 Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
  Date of Grant: 05/17/2022

Application Dated: 05/17/2022
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Thin Client
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0143  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8/nT7mdNHCaxLpyiDe/fVg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/16/2022

Application Dated: 05/16/2022
NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186
Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thin Client
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8/nT7mdNHCaxLpyiDe/fVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NComputing Co., Ltd
8th Fl., (JEI-Platz B/D) 186 Gasan digital 1-ro.Geumcheon-gu
Seoul, 08502
South Korea
  Date of Grant: 05/16/2022

Application Dated: 05/16/2022
 
Attention: Chang Yu , engineering director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMJ-AK7
Name of Grantee:  NComputing Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thin Client
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: