FCC ID SMQ9113

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 01/02/2022 Application Dated: 12/28/2021

EDAN INSTRUMENTS, INC.

#15 Jinhui Road, Jinsha Community,

Kengzi Sub-District, Pingshan District

Shenzhen, 518122 China

Attention: Huanhuan Xia

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SMQ9113
Name of Grantee:	EDAN INSTRUMENTS, INC.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.0117
38 CC ND	15E	5260.0  -  5320.0	0.0096
38 CC ND	15E	5500.0  -  5700.0	0.0112
38 CC	15E	5745.0  -  5825.0	0.0133

Single Modular Approval. Output power listed isconducted. Grantee is responsible for providingspecific testing instructions to host manufacturersfor additional testing to verify compliance as acomposite system. This includes retesting oftransmitter module per part 15.31(h) and (k) andverification of compliance with FCC RF Exposurerequirements. Separate approval is required for allother operating configurations, including portableconfigurations with respect to 2.1093. Theantenna(s) used for this transmitter must beinstalled to provide a separation distance of atleast 20 cm from all persons. OEM integrators andend-users must be provided with transmitteroperation conditions for satisfying RF exposurecompliance. This device complies with theDynamic Frequency Selection (DFS) requirements ofKDB 905462 D03 as a Client only without RadarDetection.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China

Date of Grant: 01/02/2022 Application Dated: 12/28/2021

Attention: Huanhuan Xia

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SMQ9113
Name of Grantee:	EDAN INSTRUMENTS, INC.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.0117
38 CC ND	15E	5260.0  -  5320.0	0.0096
38 CC ND	15E	5500.0  -  5700.0	0.0112
38 CC	15E	5745.0  -  5825.0	0.0133

Single Modular Approval. Output power listed isconducted. Grantee is responsible for providingspecific testing instructions to host manufacturersfor additional testing to verify compliance as acomposite system. This includes retesting oftransmitter module per part 15.31(h) and (k) andverification of compliance with FCC RF Exposurerequirements. Separate approval is required for allother operating configurations, including portableconfigurations with respect to 2.1093. Theantenna(s) used for this transmitter must beinstalled to provide a separation distance of atleast 20 cm from all persons. OEM integrators andend-users must be provided with transmitteroperation conditions for satisfying RF exposurecompliance. This device complies with theDynamic Frequency Selection (DFS) requirements ofKDB 905462 D03 as a Client only without RadarDetection.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application bHz6ofQuY4vhL68Gg6YUfw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 01/02/2022 Application Dated: 12/28/2021

EDAN INSTRUMENTS, INC.

#15 Jinhui Road, Jinsha Community,

Kengzi Sub-District, Pingshan District

Shenzhen, 518122 China

Attention: Huanhuan Xia

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SMQ9113
Name of Grantee:	EDAN INSTRUMENTS, INC.
Equipment Class:	Digital Transmission System
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.1169

Single Modular Approval. Output power listed isconducted. Grantee is responsible for providingspecific testing instructions to host manufacturersfor additional testing to verify compliance as acomposite system. This includes retesting oftransmitter module per part 15.31(h) and (k) andverification of compliance with FCC RF Exposurerequirements. Separate approval is required for allother operating configurations, including portableconfigurations with respect to 2.1093. Theantenna(s) used for this transmitter must beinstalled to provide a separation distance of atleast 20 cm from all persons. OEM integrators andend-users must be provided with transmitteroperation conditions for satisfying RF exposurecompliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China

Date of Grant: 01/02/2022 Application Dated: 12/28/2021

Attention: Huanhuan Xia

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	SMQ9113
Name of Grantee:	EDAN INSTRUMENTS, INC.
Equipment Class:	Digital Transmission System
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.1169

Single Modular Approval. Output power listed isconducted. Grantee is responsible for providingspecific testing instructions to host manufacturersfor additional testing to verify compliance as acomposite system. This includes retesting oftransmitter module per part 15.31(h) and (k) andverification of compliance with FCC RF Exposurerequirements. Separate approval is required for allother operating configurations, including portableconfigurations with respect to 2.1093. Theantenna(s) used for this transmitter must beinstalled to provide a separation distance of atleast 20 cm from all persons. OEM integrators andend-users must be provided with transmitteroperation conditions for satisfying RF exposurecompliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: