FCC ID SMQ9113EDAN
Dual Band Combo Module
by EDAN INSTRUMENTS, INC.
Grantee Code: SMQ Product Code: 9113EDAN
Latest application date: 2021-04-09
FCC ID Device Details
| FCC ID | SMQ9113EDAN |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SMQ |
| Product Code | 9113EDAN |
| Applicant Business | EDAN INSTRUMENTS, INC. 🇨🇳 |
| Related Domains |  edan.com.cn |
| Equipment Class | Dual Band Combo Module |
| Test Firm | Shenzhen BALUN Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-09 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-08-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-08-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-06-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-06-18 |
| 2412-2462 MHz | Original Equipment | 2020-05-19 |
| 5180-5240 MHz | Original Equipment | 2020-05-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User-Manual | Users Manual | 2020-11-16 | PDF 489.2 KB |
| User_manual | Users Manual | 2020-11-16 | PDF 489.2 KB |
| Internal_Photos | Internal Photos | 2021-10-06 | PDF 1.1 MB |
| Internal_Photos | Internal Photos | 2021-02-21 | PDF 266.1 KB |
| Internal_Photos | Internal Photos | 2021-01-19 | PDF 266.1 KB |
| INT_PHOTO | Internal Photos | 2020-11-16 | PDF 248.4 KB |
| Internal_photos | Internal Photos | 2020-11-16 | PDF 248.4 KB |
| EXT_PHOTO | External Photos | 2021-10-06 | PDF 2.7 MB |
| External_Photos | External Photos | 2021-10-06 | PDF 2.7 MB |
| EXT_PHOTO | External Photos | 2021-02-21 | PDF 710.3 KB |
| External_Photos | External Photos | 2021-02-21 | PDF 710.3 KB |
| External_Photos | External Photos | 2021-01-19 | PDF 932.3 KB |
| External_Photos | External Photos | 2020-12-16 | PDF 1.7 MB |
| Ext_Photos | External Photos | 2020-11-16 | PDF 1.6 MB |
| External_Photos | External Photos | 2020-11-16 | PDF 1.6 MB |
| Label and Label Location | ID Label/Location Info | 2020-05-19 | PDF 27 KB |
| Test_Setup_Photos | Test Setup Photos | 2021-10-06 | PDF 593.6 KB |
| Test_Setup_photos | Test Setup Photos | 2021-10-06 | PDF 593.6 KB |
| Test_Setup_Photos | Test Setup Photos | 2021-02-21 | PDF 738 KB |
| Test_Setup_photos | Test Setup Photos | 2021-01-19 | PDF 687.7 KB |
| RF test setup photo | Test Setup Photos | 2020-12-16 | PDF 497.5 KB |
| Test_Setup_Photos | Test Setup Photos | 2020-12-16 | PDF 497.5 KB |
| Test_Setup_Photos Metadata only | Test Setup Photos | 2020-11-16 | PDF 1,005 KB |
| test setup photo | Test Setup Photos | 2020-11-16 | PDF 997.1 KB |
| BL-SZ2120056-601 DTS test report_WLAN | Test Report | 2021-04-09 | PDF 1.9 MB |
| BL-SZ2120056-602 NII test report | Test Report | 2021-04-09 | PDF 2.4 MB |
| BL-SZ2070396-601 DTS test report_WLAN | Test Report | 2020-08-24 | PDF 2.9 MB |
| BL-SZ2070396-602 NII test report | Test Report | 2020-08-24 | PDF 3.2 MB |
| BL-SZ2020281-601 DTS test report_WLAN_rev1 | Test Report | 2020-07-22 | PDF 2.8 MB |
| DTS test report_WLAN_rev1 | Test Report | 2020-06-18 | PDF 4.4 MB |
| NII test report_rev1 | Test Report | 2020-06-18 | PDF 2.4 MB |
| BL-SZ19B0657-601 DTS test report_WLAN | Test Report | 2020-05-19 | PDF 2.4 MB |
| BL-SZ19B0657-603 FCC DFS test report | Test Report | 2020-05-19 | PDF 3 MB |
| NII Test Data Part 1 | Test Report | 2020-05-19 | PDF 2.4 MB |
| NII Test Data Part 2 | Test Report | 2020-05-19 | PDF 317.9 KB |
| NII Test Data Part 3 | Test Report | 2020-05-19 | PDF 995.7 KB |
| NII test report | Test Report | 2020-05-19 | PDF 2.5 MB |
| Agent_Authorization | Cover Letter(s) | 2021-04-09 | PDF 185.5 KB |
| Agent_Authorization_Rev_1.0 | Cover Letter(s) | 2021-04-09 | PDF 185.5 KB |
| Cover Letter for Modular Approval | Cover Letter(s) | 2021-04-09 | PDF 139.9 KB |
| FCC Class II PC request letter Rev1.1 | Cover Letter(s) | 2021-04-09 | PDF 81.2 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2021-04-09 | PDF 78.6 KB |
| FCC_Authorization Letter | Cover Letter(s) | 2021-04-09 | PDF 174.9 KB |
| FCC_Short_&_Long_Term_Confidentiality | Cover Letter(s) | 2021-04-09 | PDF 4.2 MB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2021-04-09 | PDF 4.2 MB |
| Agent_Authorization | Cover Letter(s) | 2020-08-24 | PDF 104.1 KB |
| C2PC_cover_letter | Cover Letter(s) | 2020-08-24 | PDF 176.9 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2020-07-22 | PDF 41.8 KB |
| C2PC_cover_letteri15 | Cover Letter(s) | 2020-07-22 | PDF 182.4 KB |
| Agent_Authorization | Cover Letter(s) | 2020-06-18 | PDF 41.8 KB |
| C2PC_cover_letter | Cover Letter(s) | 2020-06-18 | PDF 177.5 KB |
| Cover Letter | Cover Letter(s) | 2020-06-18 | PDF 177.5 KB |
| FCC_Short_&_Long_Term_Confidentiality | Cover Letter(s) | 2020-06-18 | PDF 4.2 MB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2020-06-18 | PDF 4.2 MB |
| Agent_Authorization | Cover Letter(s) | 2020-05-19 | PDF 42.1 KB |
| Cover Letter for Modular Approval_rev1 | Cover Letter(s) | 2020-05-19 | PDF 133 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2020-05-19 | PDF 78.1 KB |
| FCC_Short Long_Term_Confidentiality_Request | Cover Letter(s) | 2020-05-19 | PDF 268.9 KB |
| FCC_Short_&_Long_Term_Confidentiality | Cover Letter(s) | 2020-05-19 | PDF 268.9 KB |
| BL-SZ2120056-701 FCC exposure evluation | RF Exposure Info | 2021-04-09 | PDF 89 KB |
| FCC exposure evluation | RF Exposure Info | 2020-05-19 | PDF 100.2 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 38.7 KB | |
| SCH Metadata only | Schematics | PDF 1.3 MB | |
| Schematics Metadata only | Schematics | PDF 1.3 MB | |
| Operational-Description Metadata only | Operational Description | PDF 72.9 KB | |
| operation_description Metadata only | Operational Description | PDF 72.9 KB | |
| software security information information Metadata only | SDR Software/Security Inf | PDF 63.1 KB | |
| software security information information Metadata only | SDR Software/Security Inf | PDF 62.7 KB |
Application Information
| Application ID | WruKxlY6YRD7wFQn7b5gBQ== |
|---|---|
| Final Action Date | 2021-04-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022565113 |
| Model | 9113EDAN |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Dual Band Combo Module |
| Responsible Party | Huanhuan Xia, xiahuanhuan@edan.com.cn , 0086 755 26682547 |
| Technical Contact | EDAN INSTRUMENTS, INC., xiahuanhuan@edan.com.cn |
| Test Firm | Hanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com  , 86-755-66833830 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/06/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WruKxlY6YRD7wFQn7b5gBQ== | 2021-04-09 | Class II permissive change or modification of presently authorized equipment |
| VYZRPA182SIuao5yJVyYYQ== | 2021-04-09 | Class II permissive change or modification of presently authorized equipment |
| awJnOKvajb7+gXl71FbgsA== | 2020-08-24 | Class II permissive change or modification of presently authorized equipment |
| 8xlrG0GiQ/i71nL0iXMWtQ== | 2020-08-24 | Class II permissive change or modification of presently authorized equipment |
| y/DOLmRnCUghRTRLO1r5nw== | 2020-07-22 | Class II permissive change or modification of presently authorized equipment |
| tm/daw7EplbdVsbajLLFkQ== | 2020-06-18 | Class II permissive change or modification of presently authorized equipment |
| Yk76bGKvLLic3EXLmq4abQ== | 2020-06-18 | Class II permissive change or modification of presently authorized equipment |
| zdENMHTpYNOSzRhCqWEaAw== | 2020-05-19 | Original Equipment |
| V4FsZvzmYyywQRp9vBNs5g== | 2020-05-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zdENMHTpYNOSzRhCqWEaAw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/19/2020 Application Dated: 05/19/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zdENMHTpYNOSzRhCqWEaAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 05/19/2020 Application Dated: 05/19/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Yk76bGKvLLic3EXLmq4abQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 07/22/2020 Application Dated: 07/22/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application y/DOLmRnCUghRTRLO1r5nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 07/22/2020 Application Dated: 07/22/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/09/2021 Application Dated: 04/09/2021 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WruKxlY6YRD7wFQn7b5gBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 04/09/2021 Application Dated: 04/09/2021 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/09/2021 Application Dated: 04/09/2021 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VYZRPA182SIuao5yJVyYYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 04/09/2021 Application Dated: 04/09/2021 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/19/2020 Application Dated: 05/19/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application V4FsZvzmYyywQRp9vBNs5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 05/19/2020 Application Dated: 05/19/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tm/daw7EplbdVsbajLLFkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/24/2020 Application Dated: 08/24/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application awJnOKvajb7+gXl71FbgsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 08/24/2020 Application Dated: 08/24/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01514 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.01419 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.00902 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/24/2020 Application Dated: 08/24/2020 |
| EDAN INSTRUMENTS, INC. |
| #15 Jinhui Road, Jinsha Community, |
| Kengzi Sub-District, Pingshan District |
| Shenzhen, 518122 China |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8xlrG0GiQ/i71nL0iXMWtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EDAN INSTRUMENTS, INC. #15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District Shenzhen, 518122 China |
Date of Grant: 08/24/2020 Application Dated: 08/24/2020 |
| Attention: Huanhuan Xia |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SMQ9113EDAN |
| Name of Grantee: | EDAN INSTRUMENTS, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06577 |
| Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |