FCC ID SMQAX8AX9

WIFI Module

by EDAN INSTRUMENTS, INC.

Grantee Code: SMQ   Product Code: AX8AX9
Latest application date: 2023-08-30

FCC ID Device Details

FCC IDSMQAX8AX9
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSMQ
Product CodeAX8AX9
Applicant BusinessEDAN INSTRUMENTS, INC. 🇨🇳
Related Domains edan.com.cn
Equipment ClassWIFI Module
Test FirmShenzhen CTL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2023-08-30
2412-2462 MHzOriginal Equipment2023-08-30

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2023-08-30PDF 408.3 KB
user manualUsers Manual2023-08-30PDF 408.4 KB
Internalphoto Metadata onlyInternal Photos2023-08-30PDF 1.6 MB
internal photoInternal Photos2023-08-30PDF 1.6 MB
internalPhotoInternal Photos2023-08-30PDF 1.6 MB
External PhotosExternal Photos2023-08-30PDF 671.9 KB
label and label locationID Label/Location Info2023-08-30PDF 719.2 KB
label and locationID Label/Location Info2023-08-30PDF 719.2 KB
Test Photos Metadata onlyTest Setup Photos2023-08-30PDF 2.6 MB
test photoTest Setup Photos2023-08-30PDF 2.3 MB
DFS REPORTTest Report2023-08-30PDF 3.6 MB
Test reportTest Report2023-08-30PDF 4 MB
Test reportTest Report2023-08-30PDF 5 MB
test Report Metadata onlyTest Report2023-08-30PDF 2.5 MB
test Report Metadata onlyTest Report2023-08-30PDF 2.8 MB
test reportTest Report2023-08-30PDF 5.3 MB
COVER LETTERAttestation Statements2023-08-30PDF 102.9 KB
USA agentAttestation Statements2023-08-30PDF 60.7 KB
cover letterAttestation Statements2023-08-30PDF 102.9 KB
ANT reportCover Letter(s)2023-08-30PDF 1.4 MB
Agent Authorization Letter TemplateCover Letter(s)2023-08-30PDF 166.6 KB
Antenna report Metadata onlyCover Letter(s)2023-08-30PDF 1.4 MB
FCC Modular Approval Request Metadata onlyCover Letter(s)2023-08-30PDF 108.6 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2023-08-30PDF 99.1 KB
FCC Software Configuration Control DeclarationCover Letter(s)2023-08-30PDF 80.9 KB
modular letterCover Letter(s)2023-08-30PDF 108.6 KB
RF Exposure InfoRF Exposure Info2023-08-30PDF 225.4 KB
BLOCK Metadata onlyBlock DiagramPDF 32.2 KB
SCH Metadata onlySchematicsPDF 83.8 KB
OPS Metadata onlyOperational DescriptionPDF 145.2 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 146.2 KB

Application Information

Application IDGdaxAaO90cUSyz9SfnhA8g==
Final Action Date2023-08-30
Application PurposeOriginal Equipment
Applicant FRN0022565113
ModelAX8AX9
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI Module
Responsible PartyHuanhuan Xia, xiahuanhuan@edan.com.cn , 0086 755 26682547
Technical ContactEDAN INSTRUMENTS, INC., xiahuanhuan@edan.com.cn
Test FirmTracy Qi, Shenzhen CTL Testing Technology Co., Ltd., qihui@ctl-lab.com , 86-755-89486194
TCB Emailpsingh@qai.org
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
GdaxAaO90cUSyz9SfnhA8g==2023-08-30Original Equipment
1MH/pThWes56uI8jHBIQYg==2023-08-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.033200015CCC
5180-5240 MHz0.016315ECC
5260-5320 MHz0.014215ECC, ND
5500-5700 MHz0.020815ECC, ND
5745-5825 MHz0.023315ECC

Grants

TCB Grant - Application GdaxAaO90cUSyz9SfnhA8g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 08/30/2023

Application Dated: 08/25/2023
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQAX8AX9
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0163  
CC ND 15E 5260.0  -  5320.0 0.0142  
CC ND 15E 5500.0  -  5700.0 0.0208  
CC 15E 5745.0  -  5825.0 0.0233  

Single Modular Approval. Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application GdaxAaO90cUSyz9SfnhA8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
  Date of Grant: 08/30/2023

Application Dated: 08/25/2023
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQAX8AX9
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0163  
CC ND 15E 5260.0  -  5320.0 0.0142  
CC ND 15E 5500.0  -  5700.0 0.0208  
CC 15E 5745.0  -  5825.0 0.0233  

Single Modular Approval. Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 1MH/pThWes56uI8jHBIQYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 08/30/2023

Application Dated: 08/25/2023
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQAX8AX9
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0332  

Single Modular Approval. Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1MH/pThWes56uI8jHBIQYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
  Date of Grant: 08/30/2023

Application Dated: 08/25/2023
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQAX8AX9
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0332  

Single Modular Approval. Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: