FCC ID SMQCXUX

WIFI Module

by EDAN INSTRUMENTS, INC.

Grantee Code: SMQ   Product Code: CXUX
Latest application date: 2024-10-27

FCC ID Device Details

FCC IDSMQCXUX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSMQ
Product CodeCXUX
Applicant BusinessEDAN INSTRUMENTS, INC. 🇨🇳
Related Domains edan.com.cn
Equipment ClassWIFI Module
Test FirmShenzhen CTL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2024-10-27
2412-2462 MHzOriginal Equipment2024-10-26

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-04-24PDF 730.4 KB
User manualUsers Manual2025-04-24PDF 730.4 KB
Internal PhotosInternal Photos2024-10-27PDF 1.4 MB
External PhotosExternal Photos2024-10-27PDF 1.9 MB
Agent Authorization Letter TemplateExternal Photos2024-10-26PDF 134.7 KB
Label InformationID Label/Location Info2024-10-27PDF 355.1 KB
Test Setup PhotosTest Setup Photos2024-10-27PDF 344.1 KB
Test ReportTest Report2024-10-27PDF 921.2 KB
Test Report Band1Test Report2024-10-27PDF 1.8 MB
Test Report Band2Test Report2024-10-27PDF 1 MB
Test Report Band3Test Report2024-10-27PDF 1.8 MB
Test Report Band4Test Report2024-10-27PDF 1 MB
Test Report Band5Test Report2024-10-27PDF 2 MB
Test Report Band6Test Report2024-10-27PDF 1.8 MB
Test ReportTest Report2024-10-26PDF 3 MB
Test Report AppendixTest Report2024-10-26PDF 4.4 MB
Attestation Statements1Attestation Statements2024-10-27PDF 148.4 KB
Attestation Statements2Attestation Statements2024-10-27PDF 148.4 KB
U.S. Agent Letter of AttestationAttestation Statements2024-10-27PDF 85.7 KB
Agent Authorization Letter TemplateCover Letter(s)2024-10-27PDF 134.7 KB
Antenna ReportCover Letter(s)2024-10-27PDF 790 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2024-10-27PDF 72.8 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-10-27PDF 94.1 KB
Modular Approval LetterCover Letter(s)2024-10-27PDF 189.3 KB
RF ExposureRF Exposure Info2024-10-27PDF 411.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 68.8 KB
Schematics Metadata onlySchematicsPDF 345.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 22.5 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security Info.PDF 149.1 KB

Application Information

Application IDkxfs9tYKE39K7F6SATGvLw==
Final Action Date2024-10-27
Application PurposeOriginal Equipment
Applicant FRN0022565113
ModelCXUX
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI Module
Responsible PartyHuanhuan Xia, xiahuanhuan@edan.com.cn , 0086 755 26682547
Technical ContactEDAN INSTRUMENTS, INC., xiahuanhuan@edan.com.cn
Test FirmTracy Qi, Shenzhen CTL Testing Technology Co., Ltd., qihui@ctl-lab.com , 86-755-89486194
TCB Emailanezam@qai.org
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/24/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maxi conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
kxfs9tYKE39K7F6SATGvLw==2024-10-27Original Equipment
kxSjldzKN/agBJaXecy+Cg==2024-10-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.026700015CCC
5180-5240 MHz0.005915ECC
5260-5320 MHz0.004815ECC, ND
5500-5700 MHz0.012215ECC, ND
5745-5825 MHz0.007815ECC

Grants

TCB Grant - Application kxSjldzKN/agBJaXecy+Cg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 10/26/2024

Application Dated: 10/25/2024
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQCXUX
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0267  

Single Modular Approval. Output power listed is maxi conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kxSjldzKN/agBJaXecy+Cg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
  Date of Grant: 10/26/2024

Application Dated: 10/25/2024
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQCXUX
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0267  

Single Modular Approval. Output power listed is maxi conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kxfs9tYKE39K7F6SATGvLw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 10/27/2024

Application Dated: 10/26/2024
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQCXUX
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0059  
CC ND 15E 5260.0  -  5320.0 0.0048  
CC ND 15E 5500.0  -  5700.0 0.0122  
CC 15E 5745.0  -  5825.0 0.0078  

Single Modular Approval. Output power listed is maxi conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application kxfs9tYKE39K7F6SATGvLw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
  Date of Grant: 10/27/2024

Application Dated: 10/26/2024
 
Attention: Huanhuan Xia

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQCXUX
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0059  
CC ND 15E 5260.0  -  5320.0 0.0048  
CC ND 15E 5500.0  -  5700.0 0.0122  
CC 15E 5745.0  -  5825.0 0.0078  

Single Modular Approval. Output power listed is maxi conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: