FCC ID SNA-MM3400
802.11b/g Module
by Woodstream Corporation
Grantee Code: SNA Product Code: MM3400
Latest application date: 2012-03-12
FCC ID Device Details
| FCC ID | SNA-MM3400 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SNA |
| Product Code | MM3400 |
| Applicant Business | Woodstream Corporation 🇺🇸 |
| Related Domains |  woodstream.com |
| Equipment Class | 802.11b/g Module |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-03-12 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: T9J-RN171 Grant Date: 03/20/2011 | 2012-03-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2012-03-07 | PDF 41.3 KB |
| Label Information | ID Label/Location Info | 2012-03-07 | PDF 517.2 KB |
| Test Setup Photos | Test Setup Photos | 2012-03-12 | PDF 1,002.9 KB |
| Test Report | Test Report | 2012-03-12 | PDF 111.2 KB |
| Agency Agreement | Cover Letter(s) | 2012-03-12 | PDF 515.1 KB |
| Antenna Information | Cover Letter(s) | 2012-03-12 | PDF 206.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-03-12 | PDF 17.1 KB |
| Change in ID Authorization | Cover Letter(s) | 2012-03-07 | PDF 76.2 KB |
| Change in ID Request | Cover Letter(s) | 2012-03-07 | PDF 421.7 KB |
| RF Exposure | RF Exposure Info | 2012-03-12 | PDF 25.3 KB |
Application Information
| Application ID | FMlWNdvW6KooK2FMw5Su4w== |
|---|---|
| Final Action Date | 2012-03-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011707742 |
| Model | -MM3400 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g Module |
| Responsible Party | Chad Mateer, cmateer@woodstream.com , (717) 626-2125 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| FMlWNdvW6KooK2FMw5Su4w== | 2012-03-12 | Class II permissive change or modification of presently authorized equipment |
| CICAhIU4dV3qDHWqKOaKGw== | 2012-03-07 | Change in identification of presently authorized equipment. Original FCC ID: T9J-RN171 Grant Date: 03/20/2011 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0670000 | 15C |
Grants
TCB Grant - Application FMlWNdvW6KooK2FMw5Su4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 03/12/2012 Application Dated: 03/12/2012 |
| Woodstream Corporation |
| 69 N. Locust St. |
| Lititz, PA 17543 |
| Attention: Chad Mateer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-MM3400 |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.067 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. |
EAS Grant - Application FMlWNdvW6KooK2FMw5Su4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Woodstream Corporation 69 N. Locust St. Lititz, PA 17543 United States |
Date of Grant: 03/12/2012 Application Dated: 03/12/2012 |
| Attention: Chad Mateer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-MM3400 |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.067 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 03/07/2012 Application Dated: 03/07/2012 |
| Woodstream Corporation |
| 69 N. Locust St. |
| Lititz, PA 17543 |
| Attention: Chad Mateer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-MM3400 |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.067 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application CICAhIU4dV3qDHWqKOaKGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Woodstream Corporation 69 N. Locust St. Lititz, PA 17543 United States |
Date of Grant: 03/07/2012 Application Dated: 03/07/2012 |
| Attention: Chad Mateer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-MM3400 |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.067 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |