FCC ID SNA-SFM11R2D
SigFox Radio Module
by Woodstream Corporation
Grantee Code: SNA Product Code: SFM11R2D
Latest application date: 2019-12-16
FCC ID Device Details
| FCC ID | SNA-SFM11R2D |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SNA |
| Product Code | SFM11R2D |
| Applicant Business | Woodstream Corporation 🇺🇸 |
| Related Domains |  woodstream.com |
| Equipment Class | SigFox Radio Module |
| Test Firm | BEC Incorporated |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.138-904.663 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-16 |
| 902.138-904.663 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSFM11R2D Grant Date: 07/18/2019 | 2019-11-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-06-13 | PDF 202.6 KB |
| Internal Photos | Internal Photos | 2020-06-13 | PDF 484.8 KB |
| External Photos | External Photos | 2020-06-13 | PDF 119 KB |
| Label | ID Label/Location Info | 2019-11-19 | PDF 33.8 KB |
| Label Location | ID Label/Location Info | 2019-11-19 | PDF 71.3 KB |
| Test Setup Photos | Test Setup Photos | 2020-06-13 | PDF 121.9 KB |
| Test Report | Test Report | 2019-12-16 | PDF 784 KB |
| Authorization Letter | Cover Letter(s) | 2019-12-16 | PDF 73.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-12-16 | PDF 119.9 KB |
| Modular Letter | Cover Letter(s) | 2019-12-16 | PDF 145.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2019-12-16 | PDF 77.3 KB |
| Agent Authorization | Cover Letter(s) | 2019-11-19 | PDF 75.6 KB |
| Change in ID Cover Letter | Cover Letter(s) | 2019-11-19 | PDF 46.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2019-11-19 | PDF 479.1 KB |
| Original Grantee Auth Letter | Cover Letter(s) | 2019-11-19 | PDF 401.3 KB |
| RF Exposure MPE | RF Exposure Info | 2019-12-16 | PDF 208.9 KB |
Application Information
| Application ID | 7G7J6+W06nZU16WbmXOMDw== |
|---|---|
| Final Action Date | 2019-12-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008874893 |
| Model | SFM11R2D |
| Frequency Range | 902.138-904.663 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | SigFox Radio Module |
| Responsible Party | Dwayne Arrighy, darrighy@woodstream.com , 7177404600 |
| Agent | Steve Steve Steve, BEC Inc, sfanella@bec-ccl.com  , 6109706880 |
| Technical Contact | Steve Fanella, BEC Incorporated, sfamella@bec-ccl.com , 16109706880 |
| Test Firm | Steve Fanella, BEC Incorporated, sfanella@bec-ccl.com , 610-970-6880 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/13/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted. Limited Single Module Approval. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrator must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. The change filed under this application reflect the use of a different antenna with matching circuit (matching components are part of antenna and no changes have been made to the module internally) replacing the original device antenna. No other changes were made to the radio from when it was tested under the original grant. Also note that this version of the device is locked via firmware to only operate in the 902.1375 - 904.6625MHz band and not the 920.1375 - 922.6625MHz band. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 7G7J6+W06nZU16WbmXOMDw== | 2019-12-16 | Class II permissive change or modification of presently authorized equipment |
| sigXH6XnCDVvxiLm1bKAVQ== | 2019-11-19 | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSFM11R2D Grant Date: 07/18/2019 |
Equipment Authorization
Grants
TCB Grant - Application sigXH6XnCDVvxiLm1bKAVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/19/2019 Application Dated: 11/14/2019 |
| Woodstream Corporation |
| 69 N. Locust St. |
| Lititz, PA 17543 |
| Attention: Dwayne Arrighy |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-SFM11R2D |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SigFox Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.205 | |||
| 15C | 920.1375 - 922.6625 | 0.188 |
| Change in ID. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
EAS Grant - Application sigXH6XnCDVvxiLm1bKAVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Woodstream Corporation 69 N. Locust St. Lititz, PA 17543 United States |
Date of Grant: 11/19/2019 Application Dated: 11/14/2019 |
| Attention: Dwayne Arrighy |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-SFM11R2D |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SigFox Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.205 | |||
| 15C | 920.1375 - 922.6625 | 0.188 |
| Change in ID. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/16/2019 Application Dated: 12/11/2019 |
| Woodstream Corporation |
| 69 N. Locust St. |
| Lititz, PA 17543 |
| Attention: Dwayne Arrighy |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-SFM11R2D |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SigFox Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.2053 |
| Power output is conducted. Limited Single Module Approval. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrator must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. The change filed under this application reflect the use of a different antenna with matching circuit (matching components are part of antenna and no changes have been made to the module internally) replacing the original device antenna. No other changes were made to the radio from when it was tested under the original grant. Also note that this version of the device is locked via firmware to only operate in the 902.1375 - 904.6625MHz band and not the 920.1375 - 922.6625MHz band. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
EAS Grant - Application 7G7J6+W06nZU16WbmXOMDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Woodstream Corporation 69 N. Locust St. Lititz, PA 17543 United States |
Date of Grant: 12/16/2019 Application Dated: 12/11/2019 |
| Attention: Dwayne Arrighy |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SNA-SFM11R2D |
| Name of Grantee: | Woodstream Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SigFox Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.2053 |
| Power output is conducted. Limited Single Module Approval. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrator must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. The change filed under this application reflect the use of a different antenna with matching circuit (matching components are part of antenna and no changes have been made to the module internally) replacing the original device antenna. No other changes were made to the radio from when it was tested under the original grant. Also note that this version of the device is locked via firmware to only operate in the 902.1375 - 904.6625MHz band and not the 920.1375 - 922.6625MHz band. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. |
| Mail To: |