FCC ID SNA-V430

V430 Rat Snap Trap

by Woodstream Corporation

Grantee Code: SNA   Product Code: V430
Latest application date: 2021-07-06

FCC ID Device Details

FCC IDSNA-V430
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSNA
Product CodeV430
Applicant BusinessWoodstream Corporation 🇺🇸
Related Domains woodstream.com
Equipment ClassV430 Rat Snap Trap
Test FirmBEC Incorporated

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903-914.2 MHzOriginal Equipment2021-07-06
902.3-914.9 MHzOriginal Equipment2021-07-06
902.3-914.9 MHzOriginal Equipment2021-03-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-07-06PDF 730.9 KB
Users ManualUsers Manual2020-01-06PDF 286.7 KB
Internal PhotosInternal Photos2021-07-06PDF 118 KB
Internal PhotosInternal Photos2020-01-06PDF 1.6 MB
External PhotosExternal Photos2021-07-06PDF 182.5 KB
External PhotosExternal Photos2020-01-06PDF 327.1 KB
LabelID Label/Location Info2021-07-06PDF 73.8 KB
Label LocationID Label/Location Info2021-07-06PDF 48.9 KB
ID Label and LocationID Label/Location Info2020-01-06PDF 673.2 KB
Test Setup PhotosTest Setup Photos2021-07-06PDF 212.6 KB
Test Setup PhotosTest Setup Photos2020-01-06PDF 560.7 KB
Test ReportTest Report2021-07-06PDF 1.6 MB
Test ReportTest Report2021-07-06PDF 1 MB
Test ReportTest Report2020-01-06PDF 1.3 MB
Agent AuthorizationCover Letter(s)2021-07-06PDF 191.6 KB
Confidentiality LetterCover Letter(s)2021-07-06PDF 217.9 KB
Authorization LetterCover Letter(s)PDF 29.3 KB
Confidentiality LetterCover Letter(s)PDF 49.1 KB
Dismissal RequestCover Letter(s)PDF 117.5 KB
MPE Metadata onlyRF Exposure Info2021-07-06PDF 131.3 KB
MPE Metadata onlyRF Exposure Info2021-07-06PDF 144.4 KB
MPE ReportRF Exposure Info2021-07-06PDF 115.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 455.8 KB
Block Diagram 1 and 2 Metadata onlyBlock DiagramPDF 62 KB
Block Diagram 3 Metadata onlyBlock DiagramPDF 65.9 KB
Block Diagram 4 Metadata onlyBlock DiagramPDF 188.4 KB
Schematics Metadata onlySchematicsPDF 67.9 KB
Schematics 1 Metadata onlySchematicsPDF 158.3 KB
Schematics 2 Metadata onlySchematicsPDF 627 KB
Operational Description Metadata onlyOperational DescriptionPDF 156.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 92.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 113.3 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 62 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 67.3 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 62 KB
Tuning Procedure Metadata onlyParts List/Tune Up InfoPDF 62 KB

Application Information

Application IDm65ySWHnEdYAyqudJU7szA==
Final Action Date2021-07-06
Application PurposeOriginal Equipment
Applicant FRN0008874893
ModelV430
Frequency Range903-914.2 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionV430 Rat Snap Trap
Responsible PartyDwayne Arrighy, darrighy@woodstream.com , 7177404600
Test FirmSteve Fanella, BEC Incorporated, sfanella@bec-ccl.com , 610-970-6880
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance specified in the filing, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.

Applications

Application IDDatePurpose
m65ySWHnEdYAyqudJU7szA==2021-07-06Original Equipment
Cm6C7ZNjI0YJd3QPlfFldQ==2021-07-06Original Equipment
iuri47c71EZZh2XiknCs9Q==2021-03-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-914.9 MHz0.0515C
902.3-914.9 MHz15C2
902.3-914.9 MHz0.0000115C
903-914.2 MHz0.052000015C
903-914.2 MHz15C2

Grants

TCB Grant - Application m65ySWHnEdYAyqudJU7szA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/06/2021

Application Dated: 06/30/2021
Woodstream Corporation
69 N. Locust St.
Lititz, PA 17543
 
Attention: Dwayne Arrighy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SNA-V430
Name of Grantee:  Woodstream Corporation
Equipment Class: Digital Transmission System
Notes: V430 Rat Snap Trap
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.2 0.052  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance specified in the filing, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.

EAS Grant - Application m65ySWHnEdYAyqudJU7szA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Woodstream Corporation
69 N. Locust St.
Lititz, PA 17543
United States
  Date of Grant: 07/06/2021

Application Dated: 06/30/2021
 
Attention: Dwayne Arrighy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SNA-V430
Name of Grantee:  Woodstream Corporation
Equipment Class: Digital Transmission System
Notes: V430 Rat Snap Trap
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.2 0.052  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance specified in the filing, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.



TCB Grant - Application iuri47c71EZZh2XiknCs9Q==

This application does not exist.

EAS Grant - Application iuri47c71EZZh2XiknCs9Q==

This application currently is not in final status.

TCB Grant - Application Cm6C7ZNjI0YJd3QPlfFldQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/06/2021

Application Dated: 06/30/2021
Woodstream Corporation
69 N. Locust St.
Lititz, PA 17543
 
Attention: Dwayne Arrighy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SNA-V430
Name of Grantee:  Woodstream Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: V430 Rat Snap Trap
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.05  
15C 902.3  -  914.9 0.00001  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance specified in the filing, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.

This device is capable of Hybrid mode.


EAS Grant - Application Cm6C7ZNjI0YJd3QPlfFldQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Woodstream Corporation
69 N. Locust St.
Lititz, PA 17543
United States
  Date of Grant: 07/06/2021

Application Dated: 06/30/2021
 
Attention: Dwayne Arrighy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SNA-V430
Name of Grantee:  Woodstream Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: V430 Rat Snap Trap
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.05  
15C 902.3  -  914.9 0.00001  

Output power listed is conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at the distance specified in the filing, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.

This device is capable of Hybrid mode.



Mail To: